Prodatakey Mullion Reader 26bit HID Compatible, Wiegand
Enjoy the flexibility of using traditional readers that fit any application. The mullion style reader is just the right width, making it ideal for door frame applications. Or, use the single gang reader which is a bit wider making it perfect for wall mounting applications.
Features:
- Our standard readers use 125 kHz, 26 bit Weigand communication protocol, combining critical security standards with access credential compatibility.
- The mullion and single-gang standard reader are made with secure, potted electronics, making them perfect for both indoor and outdoor applications.
- Powered by pdk.io, the only true cloud access solution. Take advantage of real-time updates, cloud backup, 24-hour support, and more. (subscription required)
Specifications:
- Input: 125 kHz
- Output: 26- to 37-bit Wiegand protocol
- Temperature: -4° ~ +140° F /-20° ~ +60° C
- Operating Humidity: 0 - 95% relative humidity non-condensing
- Weight: Mullion: 0.25 lbs (4 oz). Single Gang: 0.38 lbs (6 oz)
- Power: 12V DC from the controller board. Max Amperage: 30mA
Manufacturer Resources
Product Specs
- Product Subgroup:
- Access Management
- Product Group:
- Door Controller
- Subcategory:
- Access Controls
- Product Type:
- Hardwired
- Product Model:
- Door Controller
- Product Voltage:
- 12V DC
- Product Category:
- Access Controls
- Department:
- Door Hardware
Prodatakey RDRM – Frequently Asked Questions
1) Will the Prodatakey mullion reader work with the HID 125 kHz cards we already issue?
The RDRM mullion reader reads 125 kHz credentials and is HID compatible, so the prox cards and fobs already in circulation on a 125 kHz system keep working. Output to the controller is Wiegand, 26 to 37 bit. If your existing cards are 13.56 MHz smart credentials, this reader will not read them.
2) Can I mount a Prodatakey mullion reader on the door frame instead of the wall?
That is what the mullion form factor is for. The RDRM is narrow enough to land on a door frame mullion where a single gang reader will not fit. If you are mounting to a wall or an existing single gang box, the wider single gang version of the Prodatakey standard reader is the one to order instead.
3) Can the Prodatakey mullion reader be used on an exterior door?
Yes, outdoors is covered. The mullion reader is built with potted electronics and is rated for -4 to +140 F (-20 to +60 C) and 0 to 95 percent relative humidity non-condensing, which covers most exterior entrances outside of extreme cold climates. On a north-facing loading dock in a climate that drops below -4 F, plan on a heated or sheltered mounting.
4) Does the Prodatakey mullion reader need its own power supply?
No separate supply. The reader draws 12V DC off the Prodatakey controller board and pulls a maximum of 30mA, so it powers and communicates over the same run back to the controller. Budget that 30mA per reader when you size the controller's total reader load.
5) What else do I need besides the reader to control a door with Prodatakey?
The reader alone does nothing. The RDRM is a Wiegand reader that terminates into a Prodatakey controller board, which supplies its 12V DC and makes the lock decision. The system runs on pdk.io cloud access, and that requires a subscription. You still need the controller, the locking hardware, and power for the lock.
6) Can I wire a Prodatakey mullion reader into a non-Prodatakey access panel?
Electrically it speaks standard Wiegand, 26 to 37 bit, at 12V DC and 30mA, which is the same interface most access control panels accept on their reader ports. That said, the cloud management side is pdk.io and requires a subscription, so the full feature set assumes a Prodatakey controller behind it.
7) Is this a hardwired reader or does it run wireless?
Hardwired. The RDRM is a wired mullion reader that runs cable back to the controller for both its 12V DC power and its Wiegand data. There is no battery and no wireless option, so a cable path from the frame to the controller is part of the job.
8) What part number do I order for the Prodatakey mullion prox reader?
The mullion 125 kHz reader is Prodatakey model RDRM, manufacturer part number AHDS30RVFD. There is one configuration, so there is no finish or handing to specify.
9) Can I standardize on one reader across every door in a facility with mixed frames and wall mounts?
You can standardize on the credential and the platform without forcing one enclosure. Both Prodatakey standard readers run 125 kHz in and 26 to 37 bit Wiegand out, so the same cards work everywhere and the same pdk.io system manages them. Put the mullion RDRM on narrow door frames and the single gang version where you are landing on a wall or existing box.
How fast can I get the Prodatakey RDRM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Prodatakey RDRM come with a warranty?
Absolutely. The Prodatakey RDRM is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Prodatakey RDRM?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Prodatakey RDRM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.