Prodatakey Ruggedized Single Gang Reader HID Compatibility
Rugged readers are a great fit for indoor/outdoor applications and offers users the flexibility of using everyday proximity credentials or pin numbers to gain access to secure areas. Easily add an extra layer of security with two-factor authentication on keypad readers, requiring users to present proximity credentials and enter a pin number to gain access.
Features:
- Constructed with a stylish yet sturdy aluminum alloy housing, our ruggedized readers are resistant to damage from dust, rain, and vandalism.
- Industrial yet modern, the rugged readers were designed for durable applications. Their sand-blasted surface adds to the aesthetic of any building or workspace.
- Powered by PDK.io, the only true cloud access solution. Take advantage of real-time updates, cloud backup, 24-hour support, and more (subscription required).
Specifications:
- Input: 125 kHz
- Output: 26 bit Wiegand protocol; 8-bit burst pin mode
- Temperature: -4°F ~ 140°F (-20°C ~ 60°C)
- Operating Humidity: 0 - 95%
- Dust & Waterproof Rating: IP68
- Impact Protection Rating: IK10
- Power Voltage: DC12V±10%
- Amperage Max: 45 mA
- Dimensions: 5.7 x 3.3 x 1”
Manufacturer Resources
Product Specs
- Product Subgroup:
- Access Management
- Product Group:
- Door Controller
- Subcategory:
- Access Controls
- Product Type:
- Access Controls
- Product Model:
- Door Controller
- Product Voltage:
- 12V DC
- Product Size:
- 5.7 x 3.3 x 1"
- Product Category:
- Access Controls
- Department:
- Door Hardware
Prodatakey RDRGRK – Frequently Asked Questions
1) Will the Prodatakey RDRGRK reader work with our existing HID 125 kHz proximity cards?
Yes. The RDRGRK reads 125 kHz proximity credentials and is HID compatible, so the cards and fobs already issued in a 125 kHz system will read on it. Credential output to the panel is 26-bit Wiegand, with an 8-bit burst mode for keypad PIN digits.
2) Can this Prodatakey rugged reader be mounted outdoors on a gate or exterior door?
It is built for exterior use. The housing is rated IP68 against dust and water and IK10 against impact and vandalism, in a sand-blasted aluminum alloy shell. Operating range is -4 to 140 degrees F (-20 to 60 degrees C) at 0 to 95 percent humidity, which covers most North American exterior gate and door locations.
3) Will the RDRGRK reader fit a single gang electrical box?
It is a single gang reader measuring 5.7 x 3.3 x 1 inches, so it covers a standard single gang opening with the body projecting about an inch off the surface. Note the 5.7 inch face is taller than a single gang plate, which is normal for a keypad reader and gives room for the 12-key pad.
4) What power supply do I need for the Prodatakey RDRGRK reader?
Feed it 12V DC, plus or minus 10 percent, and allow 45 mA maximum draw per reader. That current is low enough that several readers can share a typical access control power supply, but size the supply for the locks on the same circuit, not just the readers.
5) Can I require a card and a PIN on this reader instead of just a card?
Yes. The RDRGRK has a backlit 12-key keypad, so it can be set for card only, PIN only, or two-factor, where the user presents a proximity credential and then enters a PIN. PIN digits go out as an 8-bit burst; card reads go out as 26-bit Wiegand.
6) Do I need a PDK.io subscription to use this reader?
The reader itself outputs standard 26-bit Wiegand, so it can wire to a Wiegand input on a controller. The PDK.io cloud features (real-time updates, cloud backup, 24-hour support) are what require a subscription, not the reader hardware.
7) Is a vandal resistant reader like this worth it over a standard plastic prox reader?
On exposed openings, yes. A parking gate, loading dock, exterior stairwell or student-facing door gets hit, kicked and weathered; the RDRGRK answers that with an IK10 impact rating and an IP68 sealed aluminum alloy body. For an interior office door out of the weather, the rugged housing buys you nothing and a standard indoor reader is the simpler choice.
8) What is the manufacturer part number for the Prodatakey RDRGRK reader?
Order it as Prodatakey model RDRGRK, manufacturer part number AHDS30RVFD. That is the ruggedized single gang keypad version, as opposed to the non-keypad rugged readers in the same family.
How fast can I get the Prodatakey RDRGRK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Prodatakey RDRGRK come with a warranty?
Absolutely. The Prodatakey RDRGRK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Prodatakey RDRGRK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Prodatakey RDRGRK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.