RCI 915 Passive Infrared Reque...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$323.00
$207.78
RCI 915 Passive Infrared Request to Exit Switch with Field-Selectable 12/24VDC Power

RCI 915 Passive Infrared Request to Exit Switch with Field-Selectable 12/24VDC Power

(No reviews yet) Write a Review

Model: 915-B
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$323.00
$207.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

RCI 915 Passive Infrared Request to Exit Switch with Field-Selectable 12/24VDC Power

Hands-Free Egress Control for Electromagnetic Lock Applications

The RCI 915 passive infrared device provides hands-free egress switching ideal for request to exit applications using electromagnetic locks. This professional-grade switch features field-selectable 12/24VDC power operation with 38mA max at 24VDC and 35mA at 12VDC. The unit offers adjustable detection area settings and configurable relay latch time delay from 2-60 seconds for precise application control.

Professional Features & Benefits

  • Field-Selectable Power Options: 12/24VDC operation with 38mA max at 24VDC and 35mA at 12VDC for flexible system integration.
  • Adjustable Detection Zone: Precise detection area control allows customization for specific application requirements and optimal performance.
  • Configurable Time Delay: Adjustable relay latch time delay from 2-60 seconds provides application-specific control timing.
  • Dual Form C Relays: Two SPDT relays rated 2A at 30VDC offer reliable switching capacity for electromagnetic lock control.
  • Hands-Free Operation: Passive infrared technology enables touchless egress activation ideal for high-traffic and hygiene-sensitive applications.
  • Compact Design: 6-1/4"W x 1-13/32"H x 1-1/2"D dimensions allow installation in space-constrained locations.
  • Finish Options: Available in Gray or Black to complement various architectural environments.
  • Manufacturer Warranty: 2 Year Limited Warranty for added confidence and protection.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Electronic: Yes
  • Parts and Accessories Type: Replacement Parts
  • Product Attribute: Parts and Accessories
  • Product Category: Electronic Access Controls
  • Product Group: Electronic Access Controls
  • Product Model: 915
  • Product Subgroup: Parts and Accessories
  • Product Type: Parts and Accessories
  • Subcategory: Electronic Access & Data

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm 12/24VDC voltage and current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including detection area adjustment and relay latch time delay (2-60 seconds) per application requirements.
  6. Restore power and test all functions including normal operation, infrared detection response, and integration with electromagnetic lock systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Healthcare Facility Access Control
  • Educational Institution Safety Systems
  • Retail Loss Prevention
  • Industrial Facility Monitoring
  • Emergency Exit Compliance
  • Multi-Tenant Residential Access Control

Why Choose RCI Quality?

RCI electronic access control products deliver professional-grade reliability with dual Form C relays rated 2A at 30VDC and adjustable detection technology for demanding commercial applications. The 2 Year Limited Warranty provides added confidence for critical security installations. Engineered for dependable hands-free operation where touchless egress control is essential for safety and hygiene requirements.

Manufacturer Resources

RCI Product Catalog

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Type:
Parts and Accessories
Subcategory:
Electronic Access & Data
Commercial/Residential:
Commercial
Electronic:
Yes
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Model:
915
Product Category:
Electronic Access Controls
Department:
Door Hardware

RCI 915-B – Frequently Asked Questions

1) Will the RCI 915 request to exit sensor run on a 12VDC power supply, or does it need 24V?
Either. The 915 PIR request to exit sensor is field-selectable for 12 or 24VDC, drawing 38mA max at 24VDC and 35mA at 12VDC. That current draw is small enough to sit on the same supply feeding a maglock in most installs, so you can budget it against whatever the lock is already pulling. No separate transformer or voltage-specific part number to order.
2) Can the RCI 915 PIR switch drop a maglock and trigger an alarm shunt at the same time?
Yes, that is what the two relays are for. The 915 carries dual Form C (SPDT) relays rated 2A at 30VDC, so one set of contacts can break the maglock power circuit while the second shunts the door contact at the alarm panel or signals the access control board. Check the lock's holding current against the 2A/30VDC contact rating; a standard maglock is well inside it, but anything larger should be switched through an interposing relay.
3) How long does the RCI 915 hold the door unlocked after someone walks up to it?
Adjustable from 2 to 60 seconds. The relay latch time on the 915 PIR sensor is set in the field, so you can run it short (a few seconds) on a staff door where you do not want the maglock sitting released, or stretch it toward 60 for a cart route, a loading corridor, or an accessible opening where people need longer to clear the door. The detection area is separately adjustable, so aim and timing are tuned independently.
4) What is the difference between the RCI 915 request to exit sensor and a request to exit switch kit installed inside an exit device?
The RCI 915 is a passive infrared request to exit device that mounts above the opening and switches hands-free when it detects a person approaching, using dual Form C relays rated 2A at 30VDC and a field-adjustable 2-60 second relay latch time. A switch kit such as the Command Access CRSREXKIT-ED is field installable inside a Cal Royal 22/98 or Sargent 80 series exit device and signals with an SPDT switch when the pushbar itself is operated. The infrared unit releases the lock before anyone touches the door, which is the usual approach with electromagnetic locks; the exit device kit requires the person to press the bar. The Command Access CYREXKIT-ED is the equivalent field REX kit for Corbin 5000 and Yale 7000 exit devices and is rated 5A.
5) If the opening uses a mortise lock rather than a magnetic lock, what request to exit option fits?
The Command Access REX-KIT-ML is a request to exit kit for ML1-Series mortise locks and is field installable, so the egress signal comes from the lock hardware already in the door. The RCI 915 passive infrared device is instead an overhead sensor intended for request to exit applications using electromagnetic locks, with field-selectable 12/24VDC power and a 2-60 second adjustable relay latch time. Choose by where the signal originates: inside the mortise lock case, or from motion detected at the opening.
6) Where does the RCI 915 motion sensor mount, and how much space does it need above the door?
The 915 measures 6-1/4 x 1-13/32 x 1-1/2 inches, so it fits on a header or the frame face above the opening without a deep pocket behind it. That 1-1/2 inch depth is the number to check: if you are mounting to a hollow metal frame face or a narrow transom bar, confirm you have clearance for the body plus wire entry. The long dimension runs across the opening.
7) Can the RCI 915 be used as an exit sensor on a 36 inch door instead of a push bar?
It can, but the two do different things. The 915 sees motion above the opening and releases the lock before anyone touches the door, so nothing has to be pressed. A sensor bar like the DynaLock 6451-36, sized for a 36 inch door, mounts across the door itself and requires physical push contact to signal. Where a code official or an owner wants a deliberate physical action to release, the bar is the answer; where hands-free is the point, the PIR is.
8) I am standardizing egress sensors across a multi-building portfolio. Is the RCI 915 one part number for every door?
Close to it. Because the 915 handles both 12 and 24VDC by field selection and its latch time adjusts anywhere from 2 to 60 seconds, one stocked device covers doors on different power supplies and different dwell requirements. The only ordering decision left is finish, Gray or 693 Black. For a property manager keeping spares on a shelf, that means a single line item rather than a voltage-specific matrix.
9) Does the RCI 915 need its own power supply, or can it share with the access control panel?
It shares. At 38mA maximum on 24VDC, the 915 is a light load you can tap from the same regulated DC supply running the maglock or the access panel, provided that supply has headroom. If you are building the power side from scratch and need a transformer on the front end, the Adams Rite 4605 steps 115VAC down to 12/24VAC at 40 volt-amps, though the 915 itself needs DC, so a regulated DC supply or rectified output has to sit between them.
10) Will the RCI 915 hold up in a hospital corridor or a school with constant traffic?
That is the intended use. Passive infrared means there is no switch to wear out and nothing anyone has to touch, which is why the 915 goes into healthcare access control, education, and multi-tenant residential openings where hygiene and traffic volume both matter. The adjustable detection area is what makes it work in a busy corridor: you narrow the zone so people walking past the door parallel to it do not trip the release, and only someone actually approaching the opening does.
11) Is a latchbolt monitor switch the same thing as a request to exit sensor?
No. The Command Access SCHLBMKIT-ML is a field installable latchbolt monitor switch kit for Schlage L9000 mortise locks in an SPDT configuration, and it reports the position of the latchbolt - it tells the system whether the door is latched, not that someone wants to leave. The RCI 915 is a passive infrared request to exit device that detects a person at the opening and switches its dual Form C relays to release an electromagnetic lock. A door that needs both monitoring and egress release needs both devices.
12) Does an RCI 915 sensor need a separate power supply, and what supplies that?
The RCI 915 runs on field-selectable 12 or 24VDC, drawing 38mA maximum at 24VDC and 35mA at 12VDC, so it needs a DC source at the panel. The Adams Rite 4605 is a regular transformer stepping 115 VAC down to 12/24 VAC with a 40 volt-amp output, which is an AC output and is used where the connected hardware accepts AC. Confirm the supply delivers DC at the selected voltage before wiring the sensor.
13) Can the RCI 915 relays drive more than one device, or is a relay board needed?
The RCI 915 provides two Form C SPDT relays rated 2A at 30VDC, which covers a magnetic lock plus one auxiliary connection such as an alarm shunt. Where the sequence has to branch further, the Locknetics RDB4 is a four output relay distribution board supplied as a board only. Compare the number of outputs the sequence needs against the two contacts the sensor itself provides.
14) Will a touchless actuator do the same job as a request to exit sensor?
They are different points in the sequence. The LCN 8310-3803 is a 3V wireless conversion kit for jamb mount touchless actuators, which are used to trigger an automatic operator so the door swings open. The RCI 915 is a passive infrared request to exit device that switches its relays to release an electromagnetic lock for egress. An opening with both a mag lock and a power operator generally needs both functions; one does not replace the other.
15) What color options does the RCI 915 come in for matching an aluminum storefront header?
Two: Gray, and 693 Black. On a dark anodized or bronze-toned storefront header the 693 Black disappears better; Gray reads closer to clear anodized aluminum and painted hollow metal. Both are the same sensor electrically, so the choice is purely how it looks on the header.
16) Is the RCI 915 PIR sensor suitable for an exterior or wet location door?
The 915 is a commercial interior-grade device with no weather rating on record, so treat it as an inside-the-building sensor mounted on the secure side of the opening. That is the correct side anyway for a request to exit device. For openings in rain or high dust you would be looking at a purpose-made shield on the locking hardware, such as the HES 1000-102 rain guard for 1006 Series electric strikes, rather than exposing the sensor itself.
17) What finishes does the RCI 915 come in compared with other egress hardware?
The RCI 915 passive infrared request to exit device is offered in 693 Black and in Gray, so the housing can be matched to a dark frame or to a painted header. Where the opening is all-glass, the Securitron glass door accessories are a Grade 2 Glass Door Series group intended for that mounting condition rather than for header mounting.
18) What is used to protect an egress device from tampering or from weather that the RCI 915 does not address?
The RCI 915 is a passive infrared sensor for commercial door hardware applications and carries no protective enclosure of its own. Where a manual egress control has to resist misuse, the Dortronics 6510/COV is an anti-tamper alarm cover for 6500 Series pull stations and 5000 Series push buttons. Where an electric strike sits in rain or high dust, the HES 1000-102 is a Grade 1 rain guard from the 1006 Series accessories. These protect different pieces of the same opening and none substitutes for the infrared sensor.
19) Is a proximity card reader credential an alternative to an infrared egress sensor?
No, they sit on opposite sides of the door. Credentials such as the DynaLock 7551 proximity card and the DynaLock 7561 proximity tag authorize entry and require the user to present something. The RCI 915 passive infrared device is for egress, releasing the electromagnetic lock hands-free when someone approaches from the secure side, with the latch time adjustable from 2 to 60 seconds. A controlled opening typically carries a credential on the outside and a request to exit device on the inside.
How fast can I get the RCI 915-B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the RCI 915-B come with a warranty?
Absolutely. The RCI 915-B is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the RCI 915-B?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the RCI 915-B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!