Rockwood 125 X 70C Straight Pull Plate, 1" Half Round Pull, 6" Center to Center, 4" by 16" Plate

Two mounting methods come with it: #6 x 5/8 inch oval head sheet metal screws for screw-applied installs, and 1/4-20 x 2-1/4 inch thru bolts with finish washers when you want the pull pulled through the door. Thru-bolting is the one to use on high-traffic openings since the pull load goes through the door instead of into sheet metal threads. If you need self-drilling screws for a hollow metal door, specify TEK, and for tamper resistance specify TORX security screws.

It is a 4 by 16 inch plate carrying a 1 inch half round straight pull on 6 inch centers. That 4 inch plate width is the thing to check first: on a narrow stile aluminum door you need to confirm the stile will take a 4 inch wide plate before ordering. The 126 x 70 is the same arrangement with an 8 inch center-to-center pull if you want a longer grip.

The Trimco 1014 Series is the direct counterpart, a half-round pull plate with a 6 inch CTC pull. If you are matching an existing opening rather than a spec, Delaney's 4 x 16 inch pull plate shares the same plate footprint. For 8 inch centers instead, the Ives 8303 is a heavy duty pull plate offered in 8 or 10 inch center-to-center.

The Trimco 1014 Series is the nearest match in shape and spacing: it is a half-round pull plate with a 6 inch center-to-center pull, the same grip profile and CTC as the Rockwood 125 X 70C, which carries a 1 inch half round pull at 6 inch centers on a 4 by 16 inch plate. Confirm plate dimensions and finish against your opening before swapping one for the other.

Twelve finishes are offered: 605 polished clear coated, 606 satin clear coated, 612 satin clear coated, 613 satin oxidized oil rubbed, 625 polished chrome, 626 satin chrome, 628 clear anodized, 629 bright stainless, 630 satin stainless, 32D316 polished 316 alloy, 32DMS satin MicroShield coated, and BSP black suede powder coat. 630 satin stainless is the usual match for commercial openings already running 630 levers and push plates. For coastal or pool-area doors, 32D316 uses 316 alloy. Rockwood also builds these to any finish beyond the stocked architectural range.

HVBEV is the heavy bevel option. The plate edge gets a deeper bevel so it sits down harder against the door face, which helps where the plate takes cart or luggage contact along its edge. It is not standard, so it has to be called out on the order as HVBEV.

Yes, on a push/pull opening the pull plate goes on the pull side and a blank push plate goes on the push side. The Rockwood 125 x 70C is the pull half only. Delaney offers a 4 x 16 inch push plate that matches this plate size, and 3-1/2 x 15 inch push and pull plates if you want the smaller footprint on both faces.

Pull prep is an available option, so the plate can be ordered drilled for the hardware it has to coordinate with rather than field-drilled on site. Call it out on the order along with any other suffixes you need (HVBEV for heavy bevel, TEK for self-drilling screws, TORX for security screws). If your opening is a Detex Value Series exit device, Detex makes its own P/PN Series pull plate sized for that device.

Trimco's cast line covers that: the 1010 Series is a cast heavy duty pull plate with a 5 inch center-to-center pull, the 1012 is a cast tapered heavy duty plate at 5.5 inch CTC, and the 1013 is a round heavy duty plate at 5.5 inch CTC. All three run tighter centers than the 6 inch spacing on the Rockwood 125 X 70C, so check that hand clearance still works for your traffic.

The Rockwood 125 X 70C uses a 4 by 16 inch plate. Delaney runs a matched 4 by 16 set, a 4 inch by 16 inch pull plate and a 4 inch by 16 inch push plate, so the push side and pull side share a footprint. Delaney also runs a 3-1/2 by 15 inch pair if you want a smaller plate on both leaves. Match the finish across both sides at the time of order.

The 125 X 70C is a standalone pull plate prepped for through bolts or sheet metal screws and is not built around an exit device chassis. For a door with a Detex Value Series exit device, the Detex P/PN Series pull plate is the part designed to go with that device. Use the Rockwood plate where the pull is independent of the device trim.

They are different animals. The Emtek Modern, Knoxville, and lost wax cast bronze Petal push and pull plates are decorative styled sets. The Rockwood 125 X 70C is a commercial pull plate with a 1 inch half round pull at 6 inch centers on a 4 by 16 inch plate, available in stainless steel, aluminum, brass, and bronze with architectural finishes such as 630 satin stainless and 626 satin chrome. If your door schedule calls out a specific plate size and CTC, the Emtek decorative sets are chosen on appearance rather than to that dimension.

Stainless steel is the substrate on this one. Rockwood builds the 125 x 70 family in aluminum, brass, bronze and stainless steel depending on the finish selected, with the grip shaped rectangular and bent ends where it returns to the plate.