You may also like
SATCO Lighting S11563 12W, LED Direct Wire, Low Profile Downlight, 6in Square, Starfish IOT, Tunable White and RGB, 120V, 90 CRI
12 Watt - LED Direct Wire - Low Profile Downlight - 6 Inch Square - Starfish IOT - Tunable White and RGB - 120 Volt - 90 CRI - White Finish
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 50000
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Integrated
- Lamp Shape:
- Integrated LED
- Lumens:
- 750L
- Operating Frequency:
- 60Hz
- Product Type:
- Remote Driver LED Downlight
- RoHS Compliant:
- Yes
- Subcategory:
- Recessed
- Technology:
- LED
- Total Wattage:
- 12W
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Location Rating:
- Wet
- Certification:
- cETLus
- Base Material:
- Aluminum
- Location Indoor/ Outdoor:
- Indoor
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11563/S11563_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11563.pdf
- Product Voltage:
- 120V
- Product Length:
- 7.13"
- Light Temperature:
- 2000K-5000K
- Product Dimension:
- L:7.13" W:7.13" H:1.00"
- Mounting Method:
- Recessed Direct Wire
- Product Shape:
- Square
- Product Style:
- Utility
- Product Height:
- 1"
- Product Category:
- Fixtures
- Product Width:
- 7.13"
- Country of Origin:
- Thailand
- Product Weight:
- 1.28 lb
- Product Material:
- Aluminum
Satco Lighting S11563 – Frequently Asked Questions
1) Will the Satco S11563 6-inch square downlight fit where I only have about an inch of ceiling clearance?
Yes. The S11563 is a low profile direct wire downlight measuring 7.13 x 7.13 x 1.00 inches, so the housing body is only an inch deep. It mounts recessed direct wire with no can required, which is why it works in shallow joist bays and tight plenum spaces. The 7.13 inch square trim covers a 6 inch square opening.
2) Does the Satco S11563 downlight need a recessed can or housing?
No can needed. It is a direct wire fixture that mounts recessed through the ceiling opening and wires straight to the 120V branch circuit. Satco publishes installation instructions for it at https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11563/S11563_Instructions.pdf.
3) Can I use the Satco Starfish S11563 downlight in a bathroom or covered porch ceiling?
The S11563 carries a Wet location rating, so shower ceilings and covered exterior soffits are within its rating. Note that Satco classifies the fixture itself as Indoor, so for exterior use confirm the location is a protected, code-permitted application for an indoor-designated luminaire.
4) What color temperatures and colors does the Satco S11563 Starfish downlight produce?
It is tunable white plus RGB. White output is adjustable from 2000K to 5000K, and CCT is field selectable through the Starfish IOT control, not a mechanical switch. Color rendering is 90 CRI and output is 750 lumens at 12 watts. Wattage is fixed, not selectable.
5) Is the Satco S11563 downlight acceptable for a California Title 24 job?
Yes, it is California T24 Listed. It is also cETLus certified, FCC compliant and RoHS compliant, which covers the paperwork most inspectors and institutional specs ask for on a 120V, 60Hz recessed LED.
6) Do I need a separate dimmer or hub for the Satco S11563 Starfish downlight?
The fixture is dimmable and uses Satco's Starfish IOT platform, so dimming and color control run over the built-in wireless control rather than requiring a hub. A conventional wall dimmer is not what drives the tuning or RGB. If you want simple switched control, wire it to a standard 120V switch leg and tune through Starfish.
7) Can the lamp in the Satco S11563 be replaced when it burns out?
No. It is an integrated LED with no socket or lamp base, so the whole fixture is the light source. Rated life is 50,000 hours, which is the number to use when you are planning relamp cycles across a building.
8) I need a round downlight, not square. Does the S11563 come in a round trim?
The S11563 is a square fixture only, 7.13 inches square, offered in White. If your ceiling cutouts are round, this is the wrong part number and you want a round Satco Starfish downlight instead.
9) Is the Satco S11563 square downlight metal or plastic, and what does it weigh?
Aluminum body in a white finish, weighing 1.28 lb. The aluminum helps sink heat in a shallow 1 inch deep housing, and the light weight means standard ceiling clip mounting carries it without added blocking.
How fast can I get the Satco Lighting S11563 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11563 come with a warranty?
Absolutely. The Satco Lighting S11563 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11563?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11563 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.