SATCO Lighting S11565 9W, LED Direct Wire, Low Profile Regress Baffle Downlight, 4in Square, Starfish IOT, Tunable White and RGB, 90 CRI

The S11565 is a direct wire recessed downlight with a 1.25 inch housing height and a 5 x 5 inch trim footprint, so it goes into a 4 inch square ceiling cutout without a can. Because it uses a remote driver, the driver box sits in the ceiling cavity beside the fixture rather than above it, which is what lets the light body stay at 1-1/4 inches deep. Plan the cavity space for that remote driver.

It carries a wet location rating, so it is suitable for a shower or tub surround. It is listed for indoor use, which means a wet-rated indoor spot like a bath or laundry is fine but an exposed exterior soffit is not the application it is rated for.

No separate hub or gateway is needed. The S11565 uses Satco's Starfish IOT platform, which is built into the fixture and connects over the building's Wi-Fi, so color and white tuning are controlled from the app or a paired voice assistant. Wiring is standard 120V line voltage at 60Hz.

White output is tunable across 2000K to 5000K, from warm amber through daylight, and the fixture also does full RGB color. CCT is selectable, so you set it per room rather than ordering a fixed color temperature. Color rendering is 90 CRI, which is what you want over kitchens, retail displays, or anywhere skin tone and material color matter.

Yes, the S11565 is California T24 listed, so it can be specified on Title 24 compliant residential work in California. It is also cETLus certified for both US and Canadian installation, FCC compliant, and RoHS compliant, which covers most institutional and multi-family submittal requirements.

It is dimmable, and with Starfish IOT the dimming is handled through the app or voice control rather than requiring a dimmer in the wall box. That matters on retrofits where the existing switch leg is a plain single-pole switch with no neutral at the box, since you can wire it as a straight 120V switched circuit and still dim.

The LED is integrated, with no replaceable lamp or socket, so the fixture is the serviceable unit. Rated life is 50,000 hours. For a property manager standardizing across a building, that means stocking spare fixtures rather than spare lamps.

Square trim, 5 x 5 inches at the ceiling, with a regressed baffle to cut glare. It ships in one finish, white. If the other openings in your building are round 4 inch trims, this will not visually match them.

The body and base are aluminum, which carries heat away from the LED board. Install per the Satco instruction sheet for the S11565, which covers clearance requirements and the remote driver placement. Shipping weight is just under a pound at 0.96 lb, so a single ceiling clip set carries it.