You may also like
SATCO Lighting S11566 12W, LED Direct Wire, Low Profile Regress Baffle Downlight, 6in Round, Starfish IOT, Tunable White and RGB, 90 CRI
12 Watt - LED Direct Wire - Low Profile Regress Baffle Downlight - 6 Inch Round - Starfish IOT - Tunable White and RGB - 120 Volt - 90 CRI - White Finish
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 50000
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Integrated
- Lamp Shape:
- Integrated LED
- Lumens:
- 750L
- Operating Frequency:
- 60Hz
- Product Type:
- Remote Driver LED Downlight
- RoHS Compliant:
- Yes
- Subcategory:
- Recessed
- Technology:
- LED
- Total Wattage:
- 12W
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Location Rating:
- Wet
- Certification:
- cETLus
- Base Material:
- Aluminum
- Location Indoor/ Outdoor:
- Indoor
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11566/S11566_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11566.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 2000K-5000K
- Product Diameter:
- 7.17"
- Product Dimension:
- H:1.25" DIA:7.17"
- Mounting Method:
- Recessed Direct Wire
- Product Shape:
- Round
- Product Style:
- Utility
- Product Height:
- 1.25"
- Product Category:
- Fixtures
- Product Weight:
- 1.17 lb
- Product Width:
- 7.17 in
- Product Material:
- Aluminum
Satco Lighting S11566 – Frequently Asked Questions
1) Can the Satco S11566 be installed in a shower or over a tub?
Yes. The S11566 carries a Wet location rating, so it can go in a shower or above a tub. It is still classified as an indoor fixture, so use it inside the building envelope rather than on open exterior soffits.
2) Do I need a hub or bridge to control this Starfish downlight?
No hub is required. The S11566 uses Satco's Starfish IOT platform, which connects over Wi-Fi directly, and the fixture is FCC compliant for that radio. Control covers both tunable white from 2000K to 5000K and RGB color.
3) Will the S11566 pass Title 24 inspection on a California job?
Yes, it is California T24 Listed. It is also cETLus certified and RoHS compliant, which covers the usual listing requirement on commercial and multi-family inspections.
4) Is a separate dimmer switch needed for the Satco S11566, or do I dim it from the app?
The fixture is dimmable and its dimming is handled through the Starfish control rather than requiring a wall dimmer. Wire it to a constant 120V line at 60Hz; if you put it behind a legacy TRIAC dimmer, the smart controls expect full line voltage, so a plain switch or a Starfish-compatible control is the cleaner install.
5) How bright is a 12W 6-inch regress baffle downlight like this, and is it enough for a hallway or bath?
Output is 750 lumens at 12 watts, with 90 CRI color rendering. That suits corridors, baths, closets and general residential or hospitality ceilings. For a kitchen work surface or retail display where you want punch, plan tighter spacing or step up to a higher lumen fixture.
6) Can I change the bulb in the Satco S11566 when it burns out?
No, there is no replaceable lamp. It is an integrated LED with an integrated base, rated for 50,000 average hours. When it reaches end of life the whole fixture gets swapped, which is worth knowing if you are standardizing a building on it.
7) Does the color temperature on this downlight get set with a switch on the fixture?
CCT is selectable across 2000K to 5000K, but it is set through the Starfish controls rather than by a wattage switch. Wattage is fixed at 12W with no wattage selector, so the only field adjustment is color and brightness.
8) What finish and housing material does the S11566 downlight come in?
One configuration only: white finish, with an aluminum body that doubles as the heat sink. The regress baffle trim cuts glare from below. At 1.17 lb per unit it hangs off the ceiling cut without needing extra support.
9) Where do I find the wiring instructions for the Satco S11566 before rough-in?
Satco publishes both an installation instruction sheet and a full spec sheet for the S11566, linked in the product documentation. Pull those before rough-in to confirm the driver location and the 120V connection, since the remote driver has to land in an accessible spot.
How fast can I get the Satco Lighting S11566 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11566 come with a warranty?
Absolutely. The Satco Lighting S11566 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11566?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11566 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.