SATCO Lighting S11629R1 12W LED Direct Wire Downlight, Gimbaled, 3.5 Inch, CCT Selectable, Square, Remote Driver, 840 Lumens
12 Watt LED Direct Wire Downlight - Gimbaled - 3.5 Inch - CCT Selectable - Square - Remote Driver - Brushed Nickel Finish - 840 Lumens - 120 Volt
Manufacturer Resources
Product Specs
- Avg Rated Hours:
- 50000
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Integrated
- Lumens:
- 840L
- Operating Frequency:
- 60Hz
- Product Type:
- Remote Driver LED Downlight
- RoHS Compliant:
- Yes
- Subcategory:
- Recessed
- Technology:
- LED
- Total Wattage:
- 12W
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Location Rating:
- Wet
- Certification:
- cETLus - Listed
- Base Material:
- Aluminum
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11629R1/S11629R1_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11629R1.pdf
- Product Voltage:
- 120V
- Product Length:
- 4.38"
- Light Temperature:
- 2700K/3000K/3500K/4000K/5000K
- Product Dimension:
- L:4.38" W:4.38" H:2.10"
- Mounting Method:
- Recessed Direct Wire
- Product Shape:
- Square
- Product Height:
- 2.1"
- Product Category:
- Fixtures
- Product Width:
- 4.38"
- Product Weight:
- 1.01 lb
- Product Material:
- Aluminum
Satco Lighting S11629R1 – Frequently Asked Questions
1) Can the Satco S11629R1 3.5 inch square downlight be installed in a shower or under a soffit?
Yes. The S11629R1 carries a Wet location rating and is listed for both indoor and outdoor use, so showers, covered patios and soffits are all in scope. It's cETLus Listed and FCC compliant, running on 120V at 60Hz.
2) Does the S11629R1 downlight need a housing or an existing recessed can?
No can needed. It's a recessed direct wire fixture, meaning it wires straight to the 120V branch circuit at the junction box rather than screwing into an existing can's socket. It's also a remote driver design, so the driver sits outside the fixture body and has to be placed in the ceiling cavity where it stays accessible. The downlight body measures 4.38 x 4.38 x 2.10 inches, so plan the plenum depth for the housing plus the separate driver.
3) What color temperatures can I set on the Satco 12W CCT selectable downlight, and do I have to order different SKUs per room?
One part number covers five settings: 2700K, 3000K, 3500K, 4000K and 5000K, selected at the fixture. For a property manager standardizing across a building, that means a single stocked item for warm residential corridors and cooler back-of-house areas. Output is 840 lumens at 12 watts; the wattage is fixed, not selectable.
4) Does the S11629R1 meet California Title 24 for a residential or multi-family job?
It is listed as California T24 Listed, which is what a California permit inspector looks for on recessed luminaires. Rated life is 50,000 hours and the fixture is RoHS compliant.
5) Is this 3.5 inch Satco gimbal downlight dimmable, and what does the gimbal do for me?
It's dimmable on a 120V circuit, and the gimbaled optic aims, so you can tilt the beam off vertical to wash an accent wall, artwork or a reception desk instead of only dropping light straight down. Square aperture trim, brushed nickel finish.
6) Can I replace the LED lamp in this Satco downlight when it fails?
No. The light source is integrated, so there is no socket and no replaceable lamp or bulb, the whole fixture is the unit. Rated life is 50,000 hours. For MRO stocking purposes, plan on replacing the fixture rather than a lamp.
7) Should I choose a remote driver downlight like the S11629R1 or an integrated-driver canless light?
Pick the remote driver version when the ceiling cavity is shallow or crowded, or when you want the driver reachable for service without pulling the trim, since the driver mounts separately from the 4.38 inch square housing. An all-in-one canless unit is simpler to install because there's nothing extra to locate, but it buries the electronics behind the ceiling with the fixture. With the gimbal and wet rating, the S11629R1 suits aimed accent light and damp or exposed locations.
8) Is this downlight metal or plastic, and how much does one weigh for ceiling support?
Housing and base are aluminum, and each fixture weighs 1.01 lb, light enough for standard drywall or T-bar ceiling mounting without added bracing.
How fast can I get the Satco Lighting S11629R1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11629R1 come with a warranty?
Absolutely. The Satco Lighting S11629R1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11629R1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11629R1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.