You may also like
Schaub 404 4" Center to Center Lumiere Cabinet Pull
Style: Contemporary
Collection: Lumiere
Function: Cabinet Pull
Projection: 1-1/4"
Base Material: Solid Brass
CA Residents: Proposition 65 Warning
Base Dimensions: 7/8"
Overall: 6"
Center to Center: 4"
Thread / Screw Size: 8/32 x 1"
Manufacturer Resources
Schaub Product Catalog
Product Specs
- Subcategory:
- Cabinet Pulls
- Collection:
- Lumiere
- Product Type:
- Cabinet Pulls
- Product Group:
- Cabinet Hardware
- Product Subgroup:
- Cabinet Pulls
- MAP Policy:
- Yes
- Thread / Screw Size::
- 8/32 x 1"
- Overall:
- 6"
- Product Function:
- Cabinet Pull
- Product Dimension:
- 7/8"
- Product Projection:
- 1-1/4"
- Product Style:
- Contemporary
- Product Material:
- Solid Brass
- Product Category:
- Cabinet Hardware
- (CTC) Center-to-Center:
- 4"
- Department:
- Door Hardware
Schaub 404-MB – Frequently Asked Questions
1) Will the Schaub 404 Lumiere pull drop onto existing cabinet doors drilled at 4 inch centers?
Yes. The Lumiere 404 is drilled on 4 inch center-to-center spacing, so it lands on the same two holes as any other 4 inch CTC pull. Overall length is 6 inches, which means it overhangs about an inch past each screw hole, so check you have that much clear face on narrow drawer fronts or stile-and-rail doors.
2) My drawer fronts are drilled at 3-1/2 inch centers - what pull should I use instead of the Schaub 404?
The Schaub 404 Lumiere pull is fixed at 4 inch center-to-center, so it will not reach 3-1/2 inch holes without redrilling. For that spacing, the Deltana SBP35 modern square bar pull is a solid brass heavy-duty pull at 3-1/2 inches, and the Trimco 562 series includes a 3-1/2 inch center-to-center option. If the holes are at 3 inches instead, the Trimco 553 series drawer pull is built to that spacing.
3) What is the closest alternative to the Schaub 404 Lumiere pull if I need to keep the same 4 inch hole spacing?
The Schaub 404 Lumiere cabinet pull is a solid brass contemporary pull on 4 inch center-to-center spacing with a 6 inch overall length. The Omnia 1968/102 modern cabinet pull is forged solid brass and also uses 4 inch center-to-center spacing, so it drops onto the same two existing holes. The Trimco 562 series drawer pull is another option that includes a 4 inch center-to-center choice alongside 3-1/2 inch and 96mm. All three land on the same drilling, so the decision comes down to the look of the bar and the finish you need.
4) How far does the Schaub Lumiere 404 stand off the cabinet face?
Projection is 1-1/4 inches. That is enough grip clearance for a gloved hand and it keeps knuckles off the face on a full-overlay door. Worth checking against adjacent drawer banks or a door that swings past a wall return, since 1-1/4 inches of stand-off can catch.
5) What is the Schaub 404 Lumiere pull made of, and will it hold up in a rental kitchen?
Solid brass throughout, not zinc or plated steel. Solid brass pulls take repeated cycling without the post snapping or the plating flaking off a pot-metal body, which is the usual failure on budget hardware in multi-family turnovers.
6) What finishes does the Schaub 404 Lumiere pull come in for matching an existing kitchen?
Seven finishes: Oil Rubbed Bronze, Satin Nickel, Polished Chrome, Brushed Rose Gold, Matte Black, Polished Nickel, and Satin Brass. If you are matching across a building, note the code on the order (ORB, SN, PC, BRG, MB, PN, SB) rather than the finish name.
7) Is the Schaub Lumiere pull a good fit for a contemporary cabinet package, or should I look at something else?
Lumiere is Schaub's contemporary line, so it suits flat-panel and slab door programs. If you want a straight square bar profile instead, the Deltana SBP35 Modern Square Bar Pull is solid brass in a square bar shape, and Omnia's 1968/102 is a forged solid brass modern pull also at 4 inch center-to-center, so it swaps onto the same hole pattern.
8) How does the Schaub 404 Lumiere compare with the Omnia 1970 pull?
Both are contemporary solid brass cabinet pulls with a 1-1/4 inch projection - the Schaub 404 Lumiere is solid brass at 1-1/4 inch projection, and the Omnia 1970 is forged solid brass at the same 1-1/4 inch projection. The Omnia 1969 and 1971 sit slightly tighter to the face at 1-3/16 inch projection if you need a little less knuckle clearance.
9) I need a pull for a commercial cabinet run where brass finishes are not required - what else works besides the Schaub 404?
The Schaub 404 Lumiere is solid brass and comes in seven decorative finishes including satin nickel, polished chrome, matte black, and oil rubbed bronze. If you want a plainer utility pull for back-of-house cabinetry, the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. The Deltana SBP35 is a heavy-duty solid brass square bar pull if you prefer to stay in brass but want a squared profile.
How fast can I get the Schaub 404-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 404-MB come with a warranty?
Absolutely. The Schaub 404-MB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 404-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schaub 404-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.