Schaub 418 8" Center to Center Lumiere Transitional Cabinet Pull

Yes, if your existing holes are drilled 8 inches apart on center. The Schaub 418 Lumiere Transitional pull is an 8 inch center-to-center pull, so it drops straight onto cabinet doors or drawer fronts already bored at that spacing. Overall length is 10 inches, meaning about an inch of post extends past each screw hole, so make sure you have at least 10 inches of clear face width.

The 418 uses 8/32 x 1 inch machine screws, which is the standard cabinet pull thread. A 1 inch screw covers typical 3/4 inch drawer fronts with room for the post. If you are mounting through a thicker slab front, a doubled-up front, or adding a backplate, you will need longer 8/32 screws, which are sold separately.

The Schaub 418 Lumiere Transitional pull is drilled at 8 inch center to center with a 10 inch overall length, which suits wide drawers and appliance fronts. For narrow drawers and cabinet doors, shorter-bore options include the Trimco 553 Series drawer pull at 3 inch center to center, the Trimco 562 Series with 3-1/2 inch, 4 inch and 96mm center to center options, the Deltana SBP35 square bar pull at 3-1/2 inch, and the Omnia 1968/102 at 4 inch center to center. Check the existing bore spacing before you order so you are not re-drilling fronts.

Projection is 1-1/4 inches from the face of the door or drawer to the back of the grip. That is enough hand clearance for a gripped pull on a full overlay door, and it is the number to check against anything nearby, a perpendicular wall, an adjacent appliance panel, or a pull on a return corner cabinet, so the two do not collide when the doors swing.

Six finishes: Polished Brass, Satin Brass, Satin Nickel, Polished Nickel, Polished Chrome, and Polished Rose Gold. All six are on a solid brass base, so the finish is applied to brass rather than plated zinc, which matters if you are matching warm metals across a kitchen and want the tone consistent over time.

Omnia's forged solid brass cabinet pulls are the closest cross-brand option for a cleaner modern profile, including the 1970 series at a 1-1/4 inch projection that matches the 418, and the 1969 and 1971 series at 1-3/16 inch if you want slightly less standoff. Deltana's SBP series is a heavy-duty solid brass square bar pull if you want a squared section rather than the 418's transitional shape. Emtek also lists Schaub collection pulls under its SELECT line, including the Bar, Alexander, and Art Deco series.

Specify Schaub 418, Lumiere Transitional collection, 8 inch center to center, plus the finish code off the existing hardware: PB polished brass, SB satin brass, SN satin nickel, PN polished nickel, PC polished chrome, or PRG polished rose gold. Getting the center-to-center right is what keeps you out of redrilling; the existing holes must be 8 inches apart.

Emtek's Schaub Collection covers several cabinet pull series - the Emtek 8405 Select, the Alexander, the Art Deco and the Bar cabinet pull - all catalogued as cabinet knob/pull hardware, so they are designed to live alongside Schaub pulls such as the 418 Lumiere Transitional. The practical checks are finish and bore: the Schaub 418 is offered in Polished Brass, Satin Brass, Satin Nickel, Polished Nickel, Polished Chrome and Polished Rose Gold, so match the Emtek series to one of those, and confirm the Emtek pull is available in the center to center spacing your fronts are drilled for.

Only if you are re-drilling. The Schaub 418 Lumiere Transitional is a two-post cabinet pull on 8 inch centers, while knobs such as the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter, the Bachelor round ring knob at 1-1/4 inch diameter, and the Blackcomb Collection square knob at 25mm mount on a single hole. Swapping a knob onto fronts bored for the 418 leaves an open second hole, so knobs are a choice for new fronts or for doors while the 418 handles wide drawers.

The Schaub 418 Lumiere Transitional is solid brass with a 7/8 inch base dimension and ships with 8/32 x 1 inch screws. If you would rather have steel, the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. It is a plain bar profile rather than the transitional Lumiere styling, so it reads differently on a millwork package, and you should confirm its bore spacing against the 8 inch centers your fronts are drilled for.

The grip measures 7/8 inch. Combined with the 1-1/4 inch projection, it is a substantial pull with a full hand grip rather than a slim wire bar, which is what gives the Lumiere Transitional its weight in the hand on heavy drawers and appliance panels.

Not without extra parts. The 418 ships with 8/32 x 1 inch machine screws sized for a wood front. Glass or acrylic mounting needs a through-bore in the panel, sleeves or bushings to keep the metal off the glass, and a screw length matched to the panel thickness, none of which is included here.

It works as both. The 418 is a cabinet pull, and at 8 inch centers with a 10 inch overall it is commonly run horizontally on wide drawer fronts and vertically on tall cabinet and pantry doors. Same part either way, only the orientation of the two bored holes changes.