Schaub 406 6" Center to Center Lumiere Cabinet Pull

Yes, if your existing holes are drilled 6 inches apart. The Schaub 406 Lumiere pull is a 6 inch center-to-center pull, so it lands on the same two-hole pattern as any other 6 inch CTC pull. Overall length is 8 inches, so it overhangs about an inch past each hole. Mounting uses 8/32 x 1 inch screws.

No. The 406 Lumiere is built to a 6 inch center-to-center spacing only, so it will not land on 3 inch holes. For a 3 inch CTC drawer pull, the Trimco 553 Series is a 3 inch center-to-center drawer pull, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm spacings.

The Omnia 1970 Modern Cabinet Pull is the closest match on construction and stance. The Schaub 406 Lumiere is solid brass with a 1-1/4 inch projection, and the Omnia 1970 is forged solid brass also at 1-1/4 inch projection, so the pull stands off the cabinet face the same distance. The difference is styling and the mounting spacing you order: the Schaub 406 is fixed at 6 inch center-to-center with an 8 inch overall length, while the Omnia 1970 belongs to a separate 1970 series with its own spacing range. If you are matching an existing 6 inch drilling and want a contemporary look, the Schaub 406 drops straight in.

The Schaub 406 Lumiere is made at 6 inch center-to-center, so it will not land on a 4 inch drilling without redrilling the fronts. The Omnia 1968/102 is a modern forged solid brass cabinet pull built at 4 inch center-to-center, which lets you reuse the existing holes. Trimco also offers smaller spacings in its drawer pull lines - the 553 series at 3 inch center-to-center and the 562 series with 3-1/2 inch, 4 inch, and 96mm options - if you are matching shorter drawer fronts elsewhere in the same run.

Projection is 1-1/4 inches off the face of the door or drawer, with a 7/8 inch base dimension where the posts meet the front. That 1-1/4 inch standoff gives normal knuckle room and clears typical applied moldings on shaker or slab fronts as long as the trim sits inside the 8 inch overall span.

The 406 Lumiere pull takes 8/32 x 1 inch machine screws, which is the standard cabinet hardware thread. A 1 inch screw suits a typical 3/4 inch front with a little thread to spare. If you are mounting through a thicker front, a five-piece door, or a drawer box with an applied face, you will need longer 8/32 screws.

Seven finishes: Oil Rubbed Bronze, Satin Nickel, Polished Chrome, Brushed Rose Gold, Matte Black, Polished Nickel, and Satin Brass. If you are standardizing an apartment turn or a full cabinet package, order all openings in one finish code at once, since brass finishes can vary slightly between production runs.

The Lumiere is a contemporary style solid brass pull. Close alternatives we carry include the Omnia 1970 Modern Cabinet Pull, forged solid brass with the same 1-1/4 inch projection, and the Deltana SBP35 Modern Square Bar Pull in heavy-duty solid brass. Emtek also sells the Schaub Collection under its own SELECT and Bar cabinet pull lines if you want the same design language from a different program.

Look at the Omnia 1969 or the Omnia 1971, both forged solid brass modern cabinet pulls with a 1-3/16 inch projection. That is slightly tighter than the 1-1/4 inch projection of the Schaub 406 Lumiere, which helps where a drawer front swings past a return wall or an adjacent appliance. Both Omnia pulls are separate series - 1969 and 1971 - so confirm the center-to-center spacing you need before ordering, since the Schaub 406 is built at 6 inch center-to-center.

The Deltana SBP35 is a modern square bar pull in solid brass described as heavy-duty, at 3-1/2 inch, which suits utility runs and back-of-house casework where a plain square bar is preferred over a decorative profile. The Orca Hardware CK-12001 T-pull bar is another straightforward option, built in steel with a 2 inch bar width. The Schaub 406 Lumiere is solid brass in a contemporary Lumiere profile at 6 inch center-to-center, so choose based on the drilling you have and whether you want a decorative or plain bar face.

You can, but it changes the drilling. The Schaub 406 Lumiere mounts on two holes at 6 inch center-to-center with 8/32 x 1 inch screws. A knob is a single-hole item - the Orca Hardware Bachelor Collection round cabinet knob and round ring knob are both 1-1/4 inch diameter, and the Blackcomb square knob is 25mm - so swapping to a knob leaves the second hole from the old pull exposed unless the fronts are new or being refaced. Knobs are usually the better call on small doors and pulls on wide drawer fronts.

Yes. Schaub publishes a Proposition 65 warning for the Lumiere 406 pull, as it does across its solid brass product stewardship disclosures. California buyers and anyone specifying for a California project should factor that into their submittal paperwork.

The Schaub 406 Lumiere is solid brass, which is what allows the range of plated and living finishes it is offered in, including polished chrome, polished nickel, satin nickel, satin brass, brushed rose gold, matte black, and oil rubbed bronze. If finish match across a decorative kitchen or hospitality millwork package matters, stay with brass - the Omnia 1969, 1970, and 1971 modern pulls are also forged solid brass. Where the casework is utility and appearance matters less, the Orca Hardware CK-12001 T-pull bar is steel in satin nickel.