Schaub CS79-12 Steamworks Appl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$251.00
$165.28
Schaub CS79-12 Concealed Surface Mounted Steamworks 12" Appliance Pull

Schaub CS79-12 Steamworks Appliance Pull, Concealed Surface Mounted, 12" Center to Center

(No reviews yet) Write a Review

Model: SCH-CS79-12
From the Steamworks Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$251.00
$165.28
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Schaub CS79-12 Steamworks Appliance Pull, Concealed Surface Mounted, 12" Center to Center

The Schaub CS79-12 Steamworks Appliance Pull brings a Transitional design to kitchen and cabinetry hardware with a 12" center-to-center mounting span and a 13-7/8" overall length. Part of the Steamworks collection, this concealed surface mounted pull features a zinc base material, a 2" projection for comfortable grasping, and a 7/8" base dimension that supports a clean, low-profile installation. Designed as a dedicated appliance pull, it mounts with a 1/4 x 20 thread size for secure attachment to cabinetry and appliance panels.

Key Features

  • Center to Center Spacing: 12" center-to-center mounting holes provide a standard appliance pull span for straightforward installation.
  • Overall Length: 13-7/8" overall length delivers a substantial grip surface suited for appliance doors and panels.
  • Projection: 2" projection offers comfortable hand clearance away from the door or panel surface.
  • Base Dimensions: 7/8" base dimension supports the concealed surface mounted design for a streamlined appearance.
  • Zinc Construction: Zinc base material provides a durable foundation suited for everyday appliance pull use.
  • Thread / Screw Size: 1/4 x 20 thread size matches standard mounting hardware for secure installation.
  • Transitional Style: Steamworks collection styling blends traditional and contemporary lines for versatile decor pairing.
  • Concealed Surface Mounted Design: Mounting hardware stays hidden from view for a clean, finished look on appliance fronts.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 1/4 x 20
  • Product Projection: 2"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 12"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry and Appliance Panels
  • Residential Furniture
  • Commercial Cabinetry Installations
  • Bath Vanity Cabinets
  • Custom Millwork Projects
  • Multi-Family Residential Properties

Why Schaub CS79-12?

Schaub Steamworks hardware is built on a zinc base material for dependable, everyday performance on appliance fronts and cabinetry. The concealed surface mounted design and Transitional styling of the CS79-12 make it a practical choice for projects that call for a clean look paired with a substantial 13-7/8" pull. With precise 12" center-to-center spacing and a 2" projection, this pull is engineered for comfortable, reliable use in kitchens, baths, and custom cabinetry alike.

"

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Steamworks
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
1/4 x 20"
Overall:
13-7/8"
Product Function:
Appliance Pull
Product Dimension:
7/8"
Product Projection:
2"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
12"
Department:
Door Hardware

Schaub SCH-CS79-12 – Frequently Asked Questions

1) Will the Schaub CS79-12 appliance pull line up with my existing 12 inch hole spacing?
Yes, if your holes are drilled 12 inches apart on center. The Schaub CS79-12 Steamworks appliance pull is a 12 inch center-to-center pull with a 13-7/8 inch overall length, so it covers a bit more than an inch beyond the mounting holes on each side. If your panel is drilled to any other spacing, you need a different center-to-center size, not this one.
2) What screw size does the Schaub Steamworks CS79-12 appliance pull take?
It mounts with 1/4-20 threaded screws, which is the heavier appliance-pull thread rather than the 8-32 used on most standard cabinet pulls. If you are swapping out a pull that used 8-32 screws, the existing holes will likely need to be opened up for the larger 1/4-20 hardware.
3) What can I use instead of the Schaub CS79-12 if I need a long appliance pull on a refrigerator panel but want a plain bar profile?
The Schaub CS79-12 is a Steamworks collection appliance pull with 12 inch center-to-center spacing, 13-7/8 inch overall length, and a 2 inch projection in a transitional style. For a plain bar look on the same kind of appliance panel, the Orca Hardware CK-12001 T-Pull Bar is a steel bar pull with a 2 inch bar width in satin nickel, and the Emtek Bar Cabinet Pull in the Schaub collection is a bar-profile cabinet pull. Both are straight bar shapes rather than the Steamworks detailing.
4) Is a Trimco 553 drawer pull a substitute for the Schaub CS79-12?
No. The Trimco 553 Series is a drawer pull at 3 inch center-to-center, and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center. The Schaub CS79-12 is an appliance pull with 12 inch center-to-center spacing and a 13-7/8 inch overall length, so the hole spacing will not land on the same drilled holes. Use the Trimco pulls for drawer fronts and the CS79-12 where the panel is bored for 12 inch centers.
5) How far does the Schaub CS79-12 pull stand off the door, and will it clear a wall or adjacent cabinet?
Projection is 2 inches from the face of the panel, with a 7/8 inch base dimension where it meets the door. On a refrigerator or dishwasher panel in a tight galley run, measure the swing clearance against that 2 inches before you commit, since it stands off further than a typical drawer pull.
6) What does "concealed surface mounted" mean on this Schaub appliance pull?
The fasteners do not show on the front of the pull. The CS79-12 mounts to the face of the panel and the mounting screws are hidden inside the posts, so you see a clean bar and base with no visible screw heads. It still uses 1/4-20 screws through the door from behind.
7) What finishes does the Schaub Steamworks CS79 12 inch appliance pull come in?
Four: Satin Nickel (SN), Brushed Bronze (BBZ), Distressed Pewter/Copper (DPC), and Empire Bronze (EBZ). If you are matching an existing Steamworks kitchen, order the same finish code across the knobs and pulls, because the two bronzes and the distressed pewter/copper read very differently in person.
8) I want a solid brass pull instead of the zinc Schaub CS79-12 - what are my options?
The Schaub CS79-12 has a zinc base material. If a solid brass body is required, the Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, the Omnia 1969 and 1971 are forged solid brass with a 1-3/16 inch projection, the Omnia 1970 is forged solid brass with a 1-1/4 inch projection, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch center-to-center. Note those brass pulls are cabinet and drawer lengths, not 12 inch appliance spacing.
9) The Schaub CS79-12 projects 2 inches - what is a lower-profile pull for a tight galley run?
The Schaub CS79-12 projects 2 inches off the face of the panel. Where clearance to an adjacent wall or island is tight, the Omnia 1970 is a modern cabinet pull with a 1-1/4 inch projection and the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection, all forged solid brass. Those are cabinet-length pulls, so confirm the hole spacing your panel is bored for before switching.
10) What pairs with the Schaub CS79-12 on the surrounding cabinet doors and drawers?
The Schaub CS79-12 is a 12 inch center-to-center appliance pull from the Steamworks collection in a transitional style, offered in Satin Nickel, Brushed Bronze, Distressed Pewter/Copper, and Empire Bronze. For the smaller openings around it, the Emtek SELECT 8405 cabinet pulls and the Emtek Alexander and Art Deco cabinet pulls are all Schaub collection cabinet knob/pull lines. Orca Hardware also offers round knobs in the Bachelor Collection at 1-1/4 inch diameter (CK-15030, and CK-16030 with a ring) and a 25mm square knob in the Blackcomb Collection, CK-17025.
11) Can I use the CS79-12 on a regular cabinet door or drawer instead of an appliance panel?
Mechanically yes, but it is sized as an appliance pull: 12 inches on center and 13-7/8 inches overall. That is longer than most cabinet doors want and it mounts with heavier 1/4-20 hardware. For drawers and doors in the same kitchen, pair it with shorter pulls in the matching finish rather than running this length everywhere.
12) What style of kitchen does the Schaub Steamworks pull suit?
Steamworks is a transitional collection, so it bridges traditional and contemporary cabinetry rather than committing to either. If you want a strictly modern look, a square bar pull like the Deltana SBP Series or the Omnia 1970 reads cleaner; the Emtek Bar Cabinet Pull in the Schaub Collection is another straight-bar option.
13) I need matching knobs and shorter pulls for the rest of the kitchen. What goes with the Schaub Steamworks appliance pull?
Stay inside the Steamworks collection for an exact match on profile and finish. For coordinating hardware from adjacent lines, Emtek sells cabinet knobs and pulls under the Schaub Collection, including the Emtek SELECT 8405, Alexander, Art Deco, and Bar pulls. Finish names differ between lines, so match by sample, not by name.
14) Will an SDC SP50 spindle work with the Schaub CS79-12?
No, they are unrelated parts. The SDC SP50 is a 50mm spindle used in door control hardware. The Schaub CS79-12 is a surface mounted appliance pull that fastens with 1/4 x 20 threaded screws through the panel. If you need mounting hardware for the CS79-12, match the 1/4 x 20 thread, not a spindle.
How fast can I get the Schaub SCH-CS79-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub SCH-CS79-12 come with a warranty?
Absolutely. The Schaub SCH-CS79-12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub SCH-CS79-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub SCH-CS79-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!