Schlage Commercial 30-001 1-1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$117.00
$86.50
Schlage Schlage Commercial 30-001 1-1/4" 6-Pin Mortise Cylinder, Schlage L Cam, Compression Ring & Spring SCH-30-001-114

Schlage Commercial 30-001 1-1/4" 6-Pin Mortise Cylinder, Schlage L Cam, Compression Ring & Spring

(No reviews yet) Write a Review

Model: 30-001 S123 114 626
$117.00
$86.50
Selected Finish is
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$117.00
$86.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage Modular Cylider Overview

One cylinder is the foundation for every lock you need, add more flexibility with less inventory dollars, and make your job easier, faster and more profitable.
Now you can service almost any lock on any door with just one cylinder. Simply by adding or changing the front and back housing you can convert a modular cylinder into multiple cylinder types, including mortise, rim and key-in-lever. The revolutionary Schlage® Modular cylinder will dramatically reduce your inventory because you will be able to make almost any cylinder type from a series of modular components and parts.
Now, one cylinder changes everything.

Our modular cylinder is the foundation for every lock you neeS

  • One cylinder converts to three differnt cylinder types by changing the tailpiece, cam or rear housing
  • Accomadates thicker doors with six available lengths of rear housing sizes
  • Front housing available in all finishes to match the locks
  • Supports interchangeability between Everest 29™, Primus®XP, and Classic key systems
  • Fewer parts required to fill orders means less inventory and lower costs
  • Never be caught on the job without the right part

One cylinder really does fit all

Thanks to the extraordinary versatility of the Schlage® modular cylinder you’ll never be caught on the job again without the right part. You’ll be able to assemble almost any Schlage cylinder on the spot, while providing your customers the same security, toughness and quality that has made Schlage one of the best names in the business.

  • Adaptable to mortise, rim and key-in-lever or key-in-knob applications
  • Available in all Schlage keyways, including Everest 29TM and Primus® XP


DOWNLOADS

Schlage Key Systems, Cylinders and Keys Catalog


Manufacturer Resources

Product Specs

Features:
Basic Security, Enhanced Security
Application:
Compression Ring & Spring
Warranty:
3 Year
Product Group:
Parts and Accessories
Subcategory:
Parts and Accessories
Product Subgroup:
Cylinders
Product Type:
Cylinders
ANSI/BHMA:
BHMA certified to ANSI A156.5 2001
Keys Included:
2
Commercial/Residential:
Commercial
Cylinder and Keyways:
Mortise Cylinder
Lock Type:
Mortise
Compatibility:
Schlage L Mortise Locks less L9060 Exterior
Package Includes:
Compression Ring and Spring
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Model:
30-001
Door Hand Direction:
Non-Handed
Product Category:
Mechanical Locks
Department:
Door Hardware

Schlage 30-001 S123 114 626 – Frequently Asked Questions

1) I have a Corbin Russwin mortise lock, not a Schlage - will this cylinder work?
No. The cam is what drives the lock, and the 30-001 carries the Schlage L cam for Schlage L Series mortise locks. A Corbin Russwin mortise lock wants a Corbin cylinder with the correct cam for that body, such as the Corbin Russwin 1000 Series 1-1/2 inch mortise cylinder with the A02 straight cam or the 1070 Series 1-1/4 inch 6-pin mortise housing with the A01 cloverleaf cam. Get the cam right before anything else - a cylinder that threads in fine will still not retract the latch with the wrong cam.
2) Do I need to order a compression ring and spring separately with the Schlage 30-001 cylinder?
No. The compression ring and spring come in the box with the 30-001. Those are the parts that take up the gap between the cylinder and the lock face so the cylinder seats tight and does not back out, and they are the pieces most often missing when someone pulls a loose cylinder out of a parts bin. Two cut keys are included as well.
3) Can I get the Schlage 30-001 keyed alike with the other locks in my building?
Yes. Keying is a required selection on the 30-001: keyed different is the standard, keyed alike is there for running multiple openings on one key, and there is a less-cylinder option if you only need the housing. If your building is already on an existing key system, you enter the key code with the order so the cylinder is cut to your bitting rather than a random one. That is the normal way a property manager adds doors to a master system without rekeying what is already hung.
4) Which Schlage keyway do I order for the 30-001 mortise cylinder?
Order the keyway that matches the keys already in your buildings. The 30-001 covers the Classic family (C, CE, E, EF, F, FG, G) plus the sectional Everest-style keyways C123, C124, C125, C134, C135, C145, C234, C235, C245, C345 and S123, S124, S125, S134, S135, S145, S234, S235, S345. If you are on a factory master key system, the keyway is dictated by that system, not by choice. The modular cylinder platform supports interchangeability across Everest 29, Primus XP and Classic key systems.
5) What is the difference between the Schlage 30-001 mortise cylinder and an Adams Rite 4036?
Both are mortise cylinders, but they are built for different door types. The Adams Rite 4036 is a five-pin Grade 1 mortise cylinder in the 4036 series with a 1/2" minimum door thickness, which is the narrow-stile aluminum storefront world. The Schlage 30-001 is a 6-pin commercial mortise cylinder certified to ANSI A156.5 2001 and cammed for Schlage L mortise locks. If the opening is an aluminum entrance running Adams Rite hardware, the 4036 is the right family; if it is a hollow metal or wood door carrying a Schlage L mortise lock, the 30-001 is.
6) What is the closest equivalent to a Schlage 30-001 1-1/4" mortise cylinder if the job is standardizing on Corbin Russwin keying?
The Corbin Russwin 1070 is the direct counterpart: a Grade 1 series 1-1/4" 6-pin mortise housing with an A01 cloverleaf cam. It matches the Schlage 30-001 on the two dimensions that decide whether a mortise cylinder drops into the pocket - the same 1-1/4" length and the same 6-pin format. The difference is the cam. The Schlage 30-001 carries a Schlage L cam sized for Schlage L mortise locks, while the 1070 comes with the A01 cloverleaf cam, so confirm which cam the lock body's retractor expects before ordering either one.
7) The mortise pocket needs a straight cam, not a Schlage L cam - what should I order?
Look at the Corbin Russwin 1000, a Grade 1 series mortise cylinder in 1-1/2" length with an A02 straight cam. Cam geometry is the one thing that is not interchangeable at the lock body: the Schlage 30-001 is supplied with a Schlage L cam suited to Schlage L mortise locks, so if the retractor in your lock takes a straight cam the 1000 with the A02 is the one to spec. Both are 6-pin-class commercial mortise cylinders, so keying practice does not change.
8) I need a cylinder for a rim exit device, not a mortise lock - what takes the place of a Schlage 30-001 there?
A mortise cylinder and a rim cylinder are not interchangeable; the Schlage 30-001 is a mortise cylinder that threads into a mortise lock body and drives it through a cam. For a rim exit device the equivalent part is a rim cylinder housing driven by a tailpiece, such as the Corbin Russwin 3070 6-pin rim cylinder housing with a 1-7/8" tailpiece from the 3000 series. Same 6-pin keying class, different drive interface at the lock.
9) Is the Schlage 30-001 cylinder handed - do I need to know if the door is left or right hand?
Non-handed. The 30-001 goes into a left or right hand opening the same way, so you do not have to determine handing before you order. The L Series lock body is what carries the handing, not the cylinder.
10) Is the Schlage 30-001 mortise cylinder ANSI certified for a commercial building?
It is BHMA certified to ANSI A156.5 2001, the auxiliary lock and cylinder standard, and it is a commercial-duty part rather than a residential one. That is the certification line a spec writer or an institutional purchasing group usually needs on the submittal for a cylinder.
11) Can I use the Schlage 30-001 in a rim exit device or a key-in-lever lock instead of a mortise lock?
Not as it ships. The 30-001 is built as a mortise cylinder with the Schlage L cam on it. It is part of Schlage's modular cylinder platform, so the same core converts to a rim or key-in-lever/key-in-knob cylinder by changing the tailpiece, cam or rear housing - but that means ordering those components, not just dropping this one into a rim device. If you need a rim cylinder outright, order it as a rim cylinder.
12) What is the difference between the Schlage 30-001 and an interchangeable core cylinder like the BEST 1C?
Two different service models. The 30-001 is a conventional pinned mortise cylinder: to rekey it you take it out of the lock and repin it. An interchangeable core setup, such as the BEST 1C Series 5-pin core or the BEST 1CB Peaks 150 Series core, lets you pull the core with a control key and swap it in seconds without disassembling anything. IC is what facilities with high turnover standardize on; a conventional cylinder like the 30-001 is the simpler and more common choice on an existing Schlage L Series opening. The two are not interchangeable in the same lock prep - an IC housing is a different part.
13) The lock is a key-in-lever, not a mortise - is the Schlage 30-001 still the cylinder?
No. The Schlage 30-001 is a mortise cylinder cammed for Schlage L mortise locks, and a key-in-lever chassis takes a different cylinder body entirely. For a Falcon lever, the Falcon A23161-05 G is a key-in-lever cylinder for the RU/T series, 6-pin G keyway, keyed different, supplied with two cut keys - the same 6-pin format and the same two-key supply as the 30-001, in the housing a lever chassis accepts.
14) What should a locksmith use instead of a Schlage 30-001 when the facility wants small-format interchangeable core?
Move to a BEST core-based cylinder. The BEST 1C series standard 5-pin cylinder core is the baseline interchangeable core, and the BEST 1CB Peaks 150 series interchangeable core cylinder is the patented option. Both let a facility rekey by swapping cores with a control key rather than pulling and repinning cylinders, which is how larger portfolios handle turnover. The Schlage 30-001 is a conventional 6-pin mortise cylinder pinned to a Schlage keyway, so it is repinned rather than core-swapped - the choice is really about how the facility wants to manage rekeying, not about the opening.
15) Which cylinder gives more attack resistance than a standard 6-pin mortise cylinder for a high-risk door?
The BEST 1CDF is the hardened choice in the set: a drill resistant, preferred patented interchangeable core in 7-pin brass, 150 series. It adds drill resistance, patented key control and a seventh pin over a conventional six-pin cylinder. The Schlage 30-001 is a 6-pin cylinder offered in basic security and enhanced security builds and is BHMA certified to ANSI A156.5 2001, so it is a commercial-rated cylinder - the 1CDF is the move when the specification calls for physical drill resistance and restricted key duplication on top of that.
16) Is a BEST 12E dummy rim cylinder an acceptable substitute for a keyed mortise cylinder?
No - it looks like a cylinder but does not key. The BEST 12E series dummy rim cylinder has a 1-5/32" diameter and is a blank filler with no operating key function. The Schlage 30-001 is a keyed 6-pin mortise cylinder supplied with two keys and a compression ring and spring, and it drives a Schlage L mortise lock through its cam. Use the 12E only where an inactive leaf or trim opening needs to be filled for appearance.
17) A cylinder pull is listed as taking a mortise cylinder - can I put a Schlage 30-001 on an Adams Rite MS1847 opening?
Understand what you are buying first: the Adams Rite 4024 and 4025 are cylinder pulls for the Adams Rite MS1847 deadlock and deadlatch, the 4025 being a five-pin tumbler pull with through-screws and the 4024 mounting with a trim plate. Those are pull hardware built around a five-pin cylinder for an MS1847 system, not a mortise cylinder for a mortise lock body. The Schlage 30-001 is a 6-pin mortise cylinder cammed for Schlage L mortise locks. For an MS1847 storefront opening, order the Adams Rite pull; for a Schlage L mortise lock, order the 30-001.
18) The door has a deadbolt or key-in-knob lock, not a mortise lock - which cylinder covers that?
The Kaba Ilco universal cylinders cover those chassis. The 1539 is a key-in-knob and lever universal cylinder, the 1599 is a key-in-knob replacement cylinder, the 1549 is a key-in-deadbolt cylinder and the 1579 is a knob and lever cylinder for Sargent - all four are catalogued for deadbolt function. The Schlage 30-001 will not serve any of them: it is a mortise cylinder cammed for Schlage L mortise locks and drives the lock through its cam rather than a tailpiece. Identify the lock chassis first, then the cylinder body follows.
19) What retrofit cylinder should I use for a residential deadbolt or handleset rather than a commercial mortise lock?
The Medeco retrofit cylinders cover those. The 1012040 is a 6-pin lazy motion rim cylinder for Kwikset single cylinder deadbolts, the 1065140 is a 5-pin retrofit cylinder for the Arrow JL interconnected lock and Emtek handleset and deadbolt outside cylinder, and the 1075127 is a 5-pin rim type lazy motion single cylinder for handlesets and deadbolts. These are rim-type bodies driven by a tailpiece. The Schlage 30-001 is a commercial 6-pin mortise cylinder cammed for Schlage L mortise locks, so it belongs on a commercial mortise opening, not a residential handleset.
20) Which cylinder matches an Emtek lock, and is the Schlage 30-001 an option there?
For Emtek, the parts-line Emtek CY4 cylinder is the brand-matched piece, and the Medeco 1065244 is a 5-pin rim lazy motion rim type cylinder supplied with an Emtek tailpiece for a higher-security retrofit into the same hardware. Both are tailpiece-driven. The Schlage 30-001 is not an alternative on an Emtek lock - it is a 6-pin mortise cylinder built around a Schlage L cam for Schlage L mortise locks, and the cam has nothing to engage in an Emtek chassis.
21) What finishes does the Schlage 30-001 mortise cylinder come in to match my existing lock trim?
Twelve finishes: 605 bright brass, 606 satin brass, 609 antique brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, 629 bright stainless, 630 satin stainless and 643E aged bronze. Match the BHMA number on the lock you are servicing rather than the finish name, since names vary between manufacturers and the number does not. 626 satin chrome is the usual commercial default.
22) Can I order the Schlage 30-001 without a cylinder if the lock is going into an existing key system I pin myself?
Yes. The keying selection includes a none option for less-cylinder ordering, which is how locksmiths and integrators who pin to their own system buy it. If you want it factory cut instead, choose keyed different or keyed alike and supply your key code.
23) How many pins does the Schlage 30-001 cylinder have and can it be masterkeyed?
Six pins. A 6-pin cylinder gives you more chambers to work with than a 5-pin, which is what commercial master key systems are built on, and the 30-001 supports both basic and enhanced security levels across the Classic, Everest 29 and Primus XP families. If your facility runs a Primus XP system for key control, order the keyway that system uses.
How fast can I get the Schlage 30-001 S123 114 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage 30-001 S123 114 626 come with a warranty?
Absolutely. The Schlage 30-001 S123 114 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage 30-001 S123 114 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage 30-001 S123 114 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!