Schlage ND10 HSLR - Grade 1 Pa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,634.00
$1,659.42
Schlage ND10 HSLR - Grade 1 Passage Latch, High Security Ligature Resistant Trim, Non-Keyed

Schlage ND10 HSLR - Grade 1 Passage Latch, High Security Ligature Resistant Trim, Non-Keyed

(No reviews yet) Write a Review

Model: ND10S HSLR 630 RH
From the ND-Series Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,634.00
$1,659.42
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ND10 - PASSAGE LATCH

Both levers always unlocked. Inside lever is always free for immediate egress. Also available with Request to Exit (RX) function.


Schlage ND SERIES OVERVIEW

The Schlage ND Series offers a full breadth of commercial lock options with a suited combination of mechanical, electrified and electronic options. This overview covers common characteristics for the mechanical and electrified lock information.

Beyond grade 1 performance is the hallmark of the mechanical and electrified locks. ND Series locks are tested to withstand 3,100 in-lb. of abusive lever torque - more than 2 1/2 times the Grade 1 standard requirement. Offset lever pull testing up to 1,600 lbs. assures you of the lock's superb resistance against pry bar attacks. More than strong, ND Series is built to last and shows nearly zero droop or wobble after 16 million cycles.

All ND Series locks including electronic and ligature-resistant trim use the common cylindrical ANSI 161 door preparation making them easily interchangeable. They are ideal for all new construction and retrofit applications.


ND Series Mechanical Lock

The ND mechanical lock, along with being Schlage’s best selling mechanical lock, is the foundation for both the wired electrified and NDE wireless electronic lock. Not only did Schlage invent the cylindrical lock, but we continue to make it better with capabilities such as:

  • Unparalleled strength - the lock prevents access even when subjected to torque loads up to 3,100 in-lbs (2.6x BHMA1), withstands pry bar attacks of 1,600 lbs (8x BHMA requirements1), and withstands 100 hammer blows (20x BHMA requirements1, 2)
  • Exceptional durability - cycle tested to over 16M cycles (16x BHMA requirements1) with near zero droop or wobble - without the use of set screws or O-rings
  • Improved feel - improved strength and durability are more than numbers, you can actually feel it in the lock
  • Improved installation - installation is even easier than before (and withoutany set screws or O-rings)


FEATURES & BENEFITS

Security

  • Significantly exceeds ANSI/BHMA Grade 1 requirements
  • No access with minimum 3,100 in-lb. abusive lever torque, the equivalent of over 690 lbs. applied to the end of a 4-1/2" lever, 2.6 times over the BHMA requirement*
  • No access with minimum 1,600 lbs. offset lever pull for protection against pry bar attacks, 8 times over the BHMA requirement*
  • 5 points of engagement provide nearly zero droop and wobble after 16 million cycles, 16 times over the BHMA requirement*, without the use of set screws or o-rings
  • High security locking when used with Primus XP UL 437 listed cylinders

Function availability and convenience

  • 24 mechanical/4 electrified functions (custom functions available)
  • Multiple key systems available: open, patented and restricted
  • Four electrified functions auto-detect 12/24V DC operation and, with maximum current draws of 0.4 amps and 0.1 amps holding current eliminate heated levers
  • Indicator roses for classroom applications
  • Three spring cage sets support all Schlage plus eight competitive cylinder formats

Aesthetics

  • Nine lever and four rose designs
  • Ten available finishes
  • Perfectly suited to Schlage ALX Series grade 2 locks
  • Suites with Von Duprin exit devices and other Schlage products

Options

  • Vandlgard option lets the lever freely rotate up and down when locked protecting the chassis from excessive force on the lever to prevent vandlism - available on most keyed functions

* Beyond Grade 1 performance for ND Series locks with Schlage cylinders only (Conventional, FSIC & SFIC). Performance with non-Schlage cylinders will exceed BHMA grade 1 requirements, but the product performance may be less than that of Schlage cylinders.


FUNCTIONS

View the ND Series catalog for an in-depth description of all available functions.

Non-keyed functions

  • ND10 ANSI F75 Passage Lock
  • ND12 ANSI F89 Exit Lock (mechanical and electrified)
  • ND40 ANSI F76 Privacy Lock
  • Plus four additional functions

Keyed functions

  • ND50 ANSI F82 Entrance/Office Lock
  • ND53 ANSI F109 Entrance Lock
  • ND70 ANSI F84 Classroom Lock
  • ND80 ANSI F86 Storeroom Lock (mechanical and electrified)
  • Plus six additional functions

Special functions

  • ND30 ANSI F77 Patio Lock
  • ND72 ANSI F80 Communicating Lock
  • Plus five additional functions


CERTIFICATIONS & TESTING

View the ND Series catalog to see all specifications and certifications.

Certifications

  • Tested and certified under ANSI/BHMA A156.2 Series 4000, Grade 1
  • UL/cUL listed: All locks 3-hour, A label fire door 4' x 10' single door and 8' x8' pair doors; 90-minute 8' x 10' pair doors with 3/4" latch option
  • Meets ADA requirements
  • Meets BAA (Buy American Act)
  • ANSI/BHMA Certifications: All ND Series comply with A156.2 performance requirements for grade 1 cylindrical locks. Wired electrified complies with A156.25 (indoor), wireless electronic complies with A156.25 (indoor/outdoor) requirements for electrified locking devices.
  • ICC Certifications: Complies with ICC A117.1 Accessible and Usable Buildings and Facilities.
  • UL/cUL Certifications: All locks 3 hour A label single firedoor 4'0" x 10'0"; pair doors 3 hour firedoor 8'0" x 8'0" with 3⁄4" latch option; pair doors 90 minute fire 8'0" x 10'0" with 3⁄4" latch option.
  • CA Fire Code Certifications: All levers with a return to door of 1⁄2" (64 mm) or less comply (Rhodes, Sparta, Tubular, Omega, Longitude, Boardwalk).
  • FL Building Code Certifications: Complies with Florida Building Code (ASTM E330, E1886, E1996) and Miami Dade (TAS 201, 202, 203) requirements for hurricanes.
  • Federal Certifications: Meets FF-H-106C Series 161.
  • Other Certifications: UL294, CSA C22.2 No. 205-M1983, FCC Part 15, IC RSS-210, RoHS.

Testing

  • ANSI Cycles Tested: 3 million cycles (3x ANSI grade requirement).
  • Abusive locked lever torque: Minimum 3,100 inch-pounds without gaining access.
  • Offset lever pull: Mminimum 1,600 foot pounds without gaining access.
  • Vertical lever impact: Minimum 100 impacts without gaining access.
  • Cycle life: Minimum 16 million cycles; 1) with no visible lever sag; 2) without the use of performance aids (i.e. set screws, spacers, etc.).


DOWNLOADS & RESOURCES



Technical resources


Manufacturer Resources

Product Specs

Series:
ND Series
Grade:
Grade 1
Duty Level:
Heavy Duty
Handle Type:
HSLR Anti-Ligature Trim
Keyed Function:
Non-Keyed
Subcategory:
Cylindrical Lever Locks
ANSI/BHMA:
F75
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed:
No
Electronic:
No
Commercial/Residential:
Commercial
Function Description:
Both levers always unlocked. Inside lever is always free for immediate egress. Also available with Request to Exit (RX) function.
Lock Type:
Cylindrical
Lock Function:
Passage
Handle Design:
HSLR Anti-Ligature Trim
Product Attribute:
Cylindrical Locks
IMAP Policy:
Yes
Product Model:
ND10
Collection:
ND-Series
Product Function:
Passage/Hall/Closet
Product Substrate:
Zinc and Steel
Product Category:
Mechanical Locks
Department:
Door Hardware

Schlage ND10S HSLR 630 RH – Frequently Asked Questions

1) What does the Schlage ND10 passage function actually do on the door?
Both levers stay unlocked at all times. There is no key, no button, no locking of any kind: you turn either lever and the latch retracts, so the inside lever is always free for immediate egress. That is ANSI F75 passage. Use it on corridor doors, closets, and any opening that needs latching but not locking. If you need the door to lock, the ND10 is the wrong function.
2) Why would I spec an anti-ligature trim on a passage lock instead of a standard lever?
The HSLR high security ligature resistant trim replaces the lever with a sloped pull that gives nothing to tie a cord or sheet to. It's specified in behavioral health units, detention areas, correctional intake, and school or hospital rooms where a patient or inmate is at risk. The lock behind it is the same Grade 1 ND cylindrical chassis; only the trim changes. In a passage application you get free operation both sides with the ligature risk removed.
3) Can I swap a Schlage ND10 HSLR into an existing cylindrical lock prep, or do I have to re-bore the door?
No re-boring. Every ND Series lock, including the ligature-resistant trim versions, uses the common cylindrical ANSI 161 door preparation, so it drops into an existing 161 prep. That covers most commercial doors already carrying a cylindrical lever lock, which is why these get used on retrofit as readily as new construction.
4) Do I need to specify handing when I order the ND10 with HSLR trim?
Yes. The HSLR trim is handed and ships as either LH (left hand) or RH (right hand). Standard ND lever locks are field-reversible, but the ligature-resistant trim is sloped, so it has to match the door swing. Stand on the outside of the opening: if the hinges are on your left, it's left hand. Get this wrong and the slope runs the wrong way.
5) Is the Schlage ND10 HSLR approved for a fire-rated door?
Yes. ND Series locks are UL/cUL listed for 3-hour A label single fire doors up to 4'0" x 10'0", and for pair doors at 3 hours up to 8'0" x 8'0" with the 3/4 inch latch option. Pair doors at 90 minutes go to 8'0" x 10'0", again with the 3/4 inch latch. Note the pair-door listings depend on that 3/4 inch latch, so specify it when the opening is a pair.
6) Does an anti-ligature passage lock still meet ADA and accessibility code?
It does. ND Series locks meet ADA requirements and comply with ICC A117.1 for accessible and usable buildings. A passage function helps here, since there is no key, turn, or thumbturn to operate, only the trim itself.
7) Will a passage lock hold up in a high-abuse psychiatric or detention setting?
The chassis is built well past the Grade 1 minimum. It resists a minimum 3,100 in-lb of abusive lever torque, 1,600 lbs of offset lever pull against pry bar attack, and 100 vertical impacts without gaining access. Cycle life is a minimum 16 million cycles with no visible lever sag and no set screws or spacers propping it up. Heavy duty, zinc and steel construction.
8) If I need the door monitored, can I get the ND10 with a request-to-exit switch?
Yes, the ND10 passage function is also available with a Request to Exit (RX) function, which signals the access control panel when the lever is operated. The base ND10 HSLR itself is a mechanical, non-electronic lock, so RX has to be specified as a separate option rather than added later.
9) I need locked rooms on the same corridor as these passage doors. What else can I order to keep everything matching?
Stay in the ND Series. It covers 24 mechanical functions including ND40 privacy (ANSI F76), ND50 entrance/office (F82), ND70 classroom (F84), and ND80 storeroom (F86), all on the same ANSI 161 prep. The series is also suited to Schlage ALX Grade 2 locks and suites with Von Duprin exit devices, so a corridor mixing bored locks and exit hardware still reads as one package.
10) Do I have to order a cylinder or key it to my system?
No. The ND10 is a non-keyed passage latch, so there's no cylinder, no keyway, and nothing to key into a master system. Nothing to specify on the keying line of the order. If the opening needs to lock, move to a keyed ND function such as ND80 storeroom.
11) What finish does the Schlage ND10 HSLR ligature resistant trim come in?
630, satin stainless steel, in both left and right hand. That's the standard institutional finish and it matches the stainless hinges, push plates, and closer covers typically used in behavioral health and detention openings.
12) Does the Schlage ND10 HSLR qualify for a federal or Buy American job?
It does. ND Series locks meet the Buy American Act and also meet Federal Specification FF-H-106C Series 161. For coastal work, the series also complies with the Florida Building Code (ASTM E330, E1886, E1996) and Miami Dade TAS 201, 202 and 203 hurricane requirements.
How fast can I get the Schlage ND10S HSLR 630 RH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage ND10S HSLR 630 RH come with a warranty?
Absolutely. The Schlage ND10S HSLR 630 RH is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage ND10S HSLR 630 RH?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage ND10S HSLR 630 RH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

!