SHRNK-WRP.5 INCH T BODY CV GSKT
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Raceway
- Product Type:
- Type T Conduit Body
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies & Covers
- Product Material:
- Aluminum Die Cast
Red Dot DAT-1-CG – Frequently Asked Questions
1) What conduit type does the Red Dot DAT-1-CG T conduit body work with?
The DAT-1-CG is built for rigid and IMC conduit, so the hubs take threaded rigid or intermediate metal conduit. It is not a fitting for EMT set-screw or compression runs, and it is not for flexible conduit. If your run is EMT, you need a body with EMT connectors or a threaded adapter at each hub.
2) Does the DAT-1-CG conduit body come with a cover and gasket, or do I order those separately?
Cover and gasket ship with it. The DAT-1-CG is the body, cover, and gasket as one part number, so nothing extra is needed to close it out. You still supply your own conduit and any bushings or locknuts your install calls for.
3) What is the Red Dot DAT-1-CG conduit body made of?
Die cast aluminum. That keeps it lighter than a malleable iron body and it will not rust, which is why aluminum bodies are common on exterior and damp-location runs. Watch it where the environment is corrosive to aluminum, such as direct contact with concrete or masonry chemicals, and use a PVC-coated or iron body there instead.
4) Will the gasketed cover on the DAT-1-CG hold up on an outdoor conduit run?
The gasket between the cover and the body is what seals the opening against water entry, which is the reason to pick a gasketed version over a plain cover on exterior, rooftop, or wash-down runs. Die cast aluminum body will not rust. Seat the gasket flat and pull the cover screws evenly so it compresses all the way around.
How fast can I get the Red Dot DAT-1-CG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot DAT-1-CG come with a warranty?
Absolutely. The Red Dot DAT-1-CG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot DAT-1-CG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot DAT-1-CG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.