Spears P300-015 1-1/2" PVC DWV...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.86
Spears P300-015 1-1/2" PVC DWV 90° Elbow with Hub x Hub Connections

Spears P300-015 1-1/2" PVC DWV 90° Elbow with Hub x Hub Connections

(No reviews yet) Write a Review

Model: P321-015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears P300-015 1-1/2" PVC DWV 90° Elbow with Hub x Hub Connections

The Spears P300-015 is a 1-1/2" PVC DWV 90° Elbow, also referenced as a 1/4 bend, engineered to redirect drain, waste, and vent piping runs at a precise right angle. Manufactured from PVC DWV material and featuring Hub x Hub connections on both ends, this fitting is designed for solvent-weld installation into standard 1-1/2" PVC DWV piping systems. As part of the Plumbing department and the PVC & CPVC Fittings product group, within the Fittings and Valves subgroup, the P300-015 delivers dependable performance for residential and commercial plumbing applications requiring a compact, reliable directional fitting for drain, waste, and vent lines.

Key Features

  • 1-1/2" Size: Sized for 1-1/2" PVC DWV piping systems, providing a precise fit for standard drain, waste, and vent line configurations.
  • 90° Directional Change: This 1/4 bend elbow redirects piping runs at a full 90° angle, allowing efficient routing around obstacles and through tight installation spaces.
  • Hub x Hub Connections: Both ends feature hub (socket) connections designed for solvent-weld joining, creating a secure, permanent bond with mating 1-1/2" PVC DWV pipe.
  • Solvent-Weld Installation: Hub x Hub ends allow for straightforward solvent cement joining, a widely used method for assembling PVC DWV piping systems.
  • PVC DWV Construction: Manufactured from PVC DWV material suited for drain, waste, and vent applications in residential and commercial plumbing systems.
  • Plumbing Department Fitting: Classified within the Plumbing department as part of the PVC & CPVC Fittings product group and Fittings and Valves subgroup.
  • Compact Elbow Profile: Low-profile elbow design minimizes space requirements while maintaining full flow capacity through the 90° bend.

Technical Specifications

  • Product Type: PVC DWV 90° Elbow
  • Department: Plumbing
  • Product Group: PVC & CPVC Fittings
  • Product Subgroup: Fittings and Valves

Typical Applications

  • Residential Drain, Waste, and Vent Systems
  • Commercial Plumbing Installations
  • New Construction Plumbing Rough-In
  • Plumbing Repair and Retrofit Projects
  • Multi-Family Residential Properties
  • Light Commercial Facilities

Why Spears P300-015?

Spears PVC DWV fittings are manufactured to provide dependable, long-lasting performance in drain, waste, and vent piping systems. The Hub x Hub design of the P300-015 ensures a secure solvent-weld connection at both ends, making it a practical choice for plumbers and contractors who need a reliable 1-1/2" 90° elbow for PVC DWV installations across residential and commercial plumbing projects.

Product Specs

Product Type:
PVC DWV 90° Elbow
Department:
Plumbing
Product Group:
PVC & CPVC Fittings
Product Subgroup:
Fittings and Valves
list_batch:
SPR-20260918

Spears P321-015 – Frequently Asked Questions

1) Will the Spears P300-015 DWV elbow glue onto standard 1-1/2 inch PVC drain pipe?
Yes. The P300-015 is a 1-1/2 inch PVC DWV 90 degree elbow with hub (socket) connections on both ends, so it slips over the outside of 1-1/2 inch PVC DWV pipe and is joined with solvent cement. Both ends are hub, so you need two cut pipe ends, not a threaded or spigot connection. For a spigot end that drops into another fitting's hub, this is not the part.
2) Should I use a 90 degree elbow or two 45s on a DWV drain line?
Depends where in the run you are. A 90 degree (1/4 bend) like the P300-015 turns the line hard, which is fine on vertical-to-horizontal drops, vent risers, and tight framing. Where you want to keep flow sweeping and reduce the chance of a stoppage, plumbers commonly use the 45 degree (1/8 bend), offered in 1-1/2 inch as P321-015 and up through 2, 3, 4, 6 and 8 inch. For a gentle offset in a long horizontal run, the 22-1/2 degree (1/16 bend) is available in 2 inch, 3 inch and 4 inch.
3) Is a 1/4 bend the same thing as a 90 degree DWV elbow?
Same fitting, two names. The Spears P300-015 is listed as a 90 degree elbow and also referenced as a 1/4 bend, which is the drainage trade term for a quarter of a full circle. If a plumbing drawing calls for a 1-1/2 inch 1/4 bend hub x hub, this is it.
4) What sizes do these Spears PVC DWV bends come in?
The 90 degree (1/4 bend) is offered in 1-1/2 inch (P300-015) and 6 inch (P300-060). The 45 degree (1/8 bend) covers 1-1/2, 2, 3, 4, 6 and 8 inch. The 22-1/2 degree (1/16 bend) covers 2, 3 and 4 inch. All are hub x hub solvent-weld PVC DWV fittings.
5) What do I need besides the fitting to make up a solvent-weld DWV joint?
The elbow itself has no gasket or nut, so nothing in the fitting completes the joint. You supply PVC primer and PVC solvent cement rated for DWV, plus a clean square cut and a deburred, chamfered pipe end. The hub ends are a permanent bond once cemented, so dry-fit and mark your alignment before you glue.
6) Is this the right elbow for a 1-1/2 inch lavatory or tub waste arm in an apartment remodel?
Yes, for the PVC DWV portion of the work. The P300-015 is a 1-1/2 inch hub x hub 90 degree bend used in residential and commercial drain, waste and vent rough-in, repair and retrofit, including multi-family and light commercial work. Both ends glue to 1-1/2 inch PVC DWV pipe, so it suits turning a waste arm into a stack or picking up a vent.
7) Where can I find the lay length and socket depth for the Spears 1-1/2 inch DWV 90?
Spears publishes dimensional data for its PVC DWV fittings in two reference sheets ZenSupply carries with the P300-015: a DWV dimensions sheet and a PVC DWV fittings dimensions sheet. Those give the center-to-end and socket figures you need for rough-in layout.
How fast can I get the Spears P321-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears P321-015 come with a warranty?
Absolutely. The Spears P321-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears P321-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears P321-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!