Thomas & Betts 90 Degree Cord ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$60.76
Thomas & Betts 90 Degree Cord Connector

Thomas & Betts 90 Degree Cord Connector

(No reviews yet) Write a Review

Model: TB2683

In Stock (leaves warehouse same day if ordered before 3pm ET)

$60.76
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Cord Connectors-90 Degree

  • Features

    • Meets Coast Guard CG293
    • Segmented chuck provides high mechanical pullout performance, will not cut or damage cord jacket.
    • Temperature Rating: -34 to +105 Degrees Celsius
    • Suitable for use in hazardous locations where general purpose equipment is specifically permitted by NEC. Class I, Div 2; Class II, Div 1 & 2; Class III, Div 1 & 2; NEC 501-4(b), 502-4(a)(b), 503-3(a)(b)


2683 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Product Group:
Wiring Devices
Department:
Electrical
Etim:
EC000441 Cable screw gland
Unspsc:
39121431 Cable gland connector
Inner Dimensions Inches:
8x5x4
Product Color:
Black
Thread Length:
15.49mm
Operating Temperature:
-34-+105°C
Colour:
Black
Standards:
UL E13938, CSA
Material Quality:
Polyamide (PA)
Product Type:
90 Degree Cord Connector
Nominal Thread Size Inch Gas Pipe Thread:
3/4 inch
Product Details:
Cord Connectors-90 Degree
Inner Quantity:
10
Product Model:
90°-elbow
Thread Type:
NPT
Outer Quantity:
50
Product Subgroup:
Cord Grips
Product Material:
Plastic
Temperature Rating:
-34 to +105 Degrees C

Thomas & Betts TB2683 – Frequently Asked Questions

1) What cord outside diameter does the Thomas & Betts 90 degree cord connector accept?
Two cord ranges are offered: 0.560 to 0.690 inch and 0.660 to 0.780 inch outside diameter. Measure the jacket OD of your cord, not the conductor gauge, and pick the range it falls into. If your cord sits right at 0.660 to 0.690, either will grip it.
2) What size and type of thread does this 90 degree cord grip have, and will it thread into a standard box hub?
It is a 3/4 inch NPT male thread with a 15.49mm thread length, so it threads into any 3/4 inch NPT hub, conduit body, or box opening with a 3/4 inch NPT locknut arrangement. It will not mate with metric or straight-thread hubs.
3) Can I use this cord connector in a hazardous location?
It is suitable for hazardous locations where general purpose equipment is specifically permitted by the NEC: Class I, Div 2; Class II, Div 1 and 2; Class III, Div 1 and 2, per NEC 501-4(b), 502-4(a)(b), and 503-3(a)(b). It is not an explosionproof fitting for Class I, Div 1.
4) Is this cord connector UL and CSA approved for marine work?
It carries UL file E13938 and CSA, and it meets Coast Guard CG293, so it is acceptable for marine and shipboard cord entries that call for that specification.
5) Why pick a 90 degree cord grip instead of a straight one?
The 90 degree elbow body turns the cord out of the hub at a right angle, which is what you want when the enclosure sits tight to a wall, ceiling, or machine frame and a straight grip would force a hard bend in the jacket right at the fitting. For an open approach with room for a sweeping cord bend, a straight cord connector in the same 3/4 inch NPT size is simpler and shorter.
6) Will this cord connector hold up in a cold outdoor or refrigerated install?
The rated operating range is -34 to +105 degrees Celsius, which covers freezer rooms, unheated outdoor equipment, and hot machinery enclosures. The body is polyamide (PA) plastic, not metal, so it is also a non-conductive, corrosion-free option.
7) Does the grip damage the cord jacket when tightened?
No. A segmented chuck closes evenly around the jacket for high mechanical pullout resistance without cutting or scoring it, which matters on portable and flexing cord where a sharp clamp would eventually open the jacket.
8) How do these 90 degree cord connectors come packaged for a job order?
They pack 10 to the inner carton and 50 to the outer, with the inner carton measuring 8 x 5 x 4 inches. Handy if you are standardizing cord entries across a plant or building and want to order by the carton.
How fast can I get the Thomas & Betts TB2683 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts TB2683 come with a warranty?
Absolutely. The Thomas & Betts TB2683 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts TB2683?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts TB2683 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!