Trimco 1001-11 Heavy Duty Push Plate (8" x 16")

The 1001-11 is the 8 x 16 inch plate in Trimco's 1001 Series. The series standard sizes are 3 x 12, 3-1/2 x 15, 4 x 16, 6 x 16 and 8 x 16 inches, and Trimco also builds custom sizes. The 8 x 16 is the widest of the standard offerings, which is what you want on high traffic openings where hands land all over the push side rather than in one spot.

The Trimco 1001-11 is a flat 8 inch by 16 inch push plate, so it gives the hand a surface to press but nothing to grip on the opposite face. Pair it with a grip-style pull such as the Ives 8103HD heavy duty straight door pull, a 1 inch round bar with through bolt mounting, or the Ives 8102HD heavy duty straight pull, a 3/4 inch round bar with 1-1/2 inch clearance. For an offset grip, the Ives 8145EZHD is a 45 degree offset pull described as ADA compliant, and the Ives 8169 is a C style offset solid pull at 1 inch diameter.

The Trimco 1001 series push plate is offered with a cut for cylinder option, which covers a large 8 inch by 16 inch area of the door face. If you only need the cylinder trim itself, the Cal-Royal PUL-175 is a night latch cylinder pull of stainless steel construction at 3-1/2 inch height, a much smaller footprint on the door.

The Trimco 1001-11 heavy duty push plate is listed as ADA compliant, which suits it to the push side of an opening where no grasping, pinching or twisting is required. On the pull side, the Ives 8145EZHD 45 degree offset door pull is likewise described as ADA compliant and comes with heavy duty mounting hardware. Using the plate on the push face and an offset pull on the pull face is a common way to handle both sides of the leaf.

Material is .050 inch thick stainless steel, brass, bronze or aluminum, with a 1/8 inch plastic version available as an option. Trimco lists the 1001 for schools, public buildings, commercial and industrial buildings, government and military facilities, and multifamily. All four edges are pencil beveled so there is no sharp edge where a hand or a cart contacts the plate.

That is exactly what the cut for cylinder version of the 1001 is for. If instead you need the cylinder itself trimmed with a dedicated pull rather than a flat plate, the Cal-Royal PUL-175 night latch cylinder pull is a 3-1/2 inch high stainless steel piece built for that application. The plain 1001 plate has no cylinder opening, so do not order it for a cylindered push face.

Center-to-center is listed at 3 inches. The plate ships with oval head screws as standard, so you are drilling to Trimco's 1001 Series template rather than reusing arbitrary holes. On a retrofit, check the existing plate's hole spacing against that 3 inch figure before you pull the old one off, since a larger 8 x 16 plate will cover most older screw holes anyway.

Ten finishes: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 626 satin chrome, 628 satin aluminum, 629 bright stainless steel, 630 satin stainless steel, and 710CU Healthy Hardware Steralloy Silver. For matching an existing building standard, 630 satin stainless is the usual commercial default and 626 satin chrome the common match to older lever and closer trim.

710CU Steralloy Silver is Trimco's Healthy Hardware finish, and the 1001-11 is flagged as a Healthy Hardware product in that option. It is a copper bearing alloy finish specified on touch surfaces in healthcare and other facilities where hand contact hygiene drives the hardware spec. A push plate is the highest touch surface on a door, which is why it is one of the places this finish gets specified first.

No. The Trimco 1001-11 is a flat plate of .050 inch stainless steel, brass, bronze or aluminum, pencil beveled on all four edges, meant to take hand pressure on a push-side door face. Products like the ABH AB3300 straight flat end pull handle at 1.00 inch diameter or the ABH AB7200 solid stainless steel flat end pull at 7/8 inch diameter are graspable bar handles that project from the door. They are used on opposite sides of the same opening rather than as substitutes for each other.

The Trimco 1001-11 is a single-face 8 inch by 16 inch push plate in .050 inch material, mounted with oval head screws, and suits flush wood or hollow metal leaves in schools, public buildings and commercial or industrial work. For an opening that needs matching grips on both faces, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull set and the SSPORBB24 is a 24 inch back-to-back round offset set; the Deltana OHP620 is an off-set handle pull in a back-to-back set listed for 1-1/8 inch to 1-3/8 inch door thickness.

The Trimco 1001-11 is offered in the 710CU Healthy Hardware Steralloy Silver finish and carries a Healthy Hardware designation, which matters on a plate that takes direct hand contact all day in schools and healthcare-type facilities. Among the alternatives, pulls such as the ABH AB7200 solid stainless steel flat end pull and the Cal-Royal PUL-175 are described by their stainless steel construction rather than by an antimicrobial finish option.

Yes. Trimco manufactures the 1001 Series push plates in the United States. That matters on government, military and federally funded school work where domestic sourcing is written into the spec.

The Trimco 1001-11 is a commercial-rated flat plate with a plain pencil beveled edge in finishes such as 605 bright brass, 613 oil rubbed bronze, 622 matte black and 630 satin stainless steel. If the opening calls for ornamental trim instead, Emtek offers 8 inch door pulls in the Art Nouveau series in lost wax cast bronze with handing selection, plus the Arts and Crafts, Baden and Brisbane 8 inch pulls. Those are grip pulls with styled bodies rather than flat push surfaces.

The Trimco 1001-11 is a heavy duty flat push plate in .050 inch stainless steel, brass, bronze or aluminum, fixed with oval head screws and beveled on all four sides. The ABH AB3310 is an offset flat end door pull handle described as commercial grade surface mount, and the ABH AB3330 is an offset round end pull available with custom length options. The Trimco covers a broad area of the door face against hand and shoulder contact; the ABH pulls give a projecting grip for opening the leaf.

The Trimco 1001-11 push plate measures 8 inches by 16 inches, and Trimco's 1001 series also runs 3 by 12, 3-1/2 by 15, 4 by 16 and 6 by 16 for narrower leaves. On the opposite face, the Deltana SSP1210 is a 12 inch contemporary pull in a single side configuration, a shorter run than the 24 inch Deltana SSPOBB24 back-to-back offset set.