Trimco 562 Series Drawer Pulls...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.17
$9.00
Trimco Trimco 562 Series Drawer Pulls (3-1/2", 4", and 96mm ctc options) TRI-562

Trimco 562 Series Drawer Pulls (3-1/2", 4", and 96mm ctc options)

(No reviews yet) Write a Review

Model: 562-3.626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.17
$9.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

553 & 562 SERIES CABINET PULLS VIEWERS OVERVIEW

Trimco offers a variety of Cabinet Pulls to suit many applications. From economical wire pulls (562) to heavy-duty pulls (553), Trimco has great options for your project. Trimco’s pulls are available in many sizes and architectural finishes. Looking for something unique? Trimco can manufacture something custom that really makes your project special.

 

FEATURES & BENEFITS

  • Manufactured from stainless steel, brass or bronze.
  • Multiple styles and architecture finishes to match any decor.
  • Looks great with Trimco’s Back Plates.
  • Customizable sizes and styles also available.

 

APPLICATIONS

  • Commercial & Industrial Buildings
  • Government & Military Facilities
  • Hospitality
  • Manufacturing Facilities
  • Multifamily & Mixed-Use
  • Office Buildings

 

DOWNLOADS & RESOURCES

553 & 562 CutSheet 102518

553 & 562 Wire Cabinet Pull template

Manufacturer Resources

Product Specs

Series:
562 Series
ADA Compliant:
Yes
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Subcategory:
Cabinet Knobs and Pulls
Commercial/Residential:
Residential
Healthy Hardware:
Yes
Product Category:
Cabinet Hardware
Department:
Door Hardware

Trimco 562-3.626 – Frequently Asked Questions

1) Is the Trimco 562 cabinet pull ADA compliant?
Yes. The 562 wire pull is flagged ADA compliant in its spec data. That matters on casework in a healthcare, education, or government facility, where cabinet hardware has to be operable without tight grasping or pinching; a wire pull gives you a loop your whole hand can hook, which is why this style tends to show up on ADA millwork instead of a knob.
2) What is a solid brass alternative to the Trimco 562 wire pull at 3-1/2 inch center-to-center?
The Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch heavy-duty solid brass bar pull, so it lands on the same 3-1/2 inch hole spacing the Trimco 562 offers and can reuse existing drilling. The difference is form and material: the SBP35 is a square-profile bar in solid brass, while the Trimco 562 is a wire pull made from stainless steel, brass or bronze. If your cabinet faces are already bored at 3-1/2 inch and you want a squared modern bar rather than a bent wire, the SBP35 drops onto the same centers.
3) What can I use instead of a Trimco 562 drawer pull on cabinets drilled at 4 inch centers?
The Omnia 1968/102 Modern Cabinet Pull is forged solid brass with 4 inch center-to-center spacing, which matches the 4 inch centers the Trimco 562 is built in. Either one lands on the same two holes at 4 inch. The Omnia is a forged solid brass modern pull; the Trimco 562 is a wire pull available in stainless steel, brass or bronze. Confirm your bore spacing is a true 4 inch and not 96mm before ordering, since the Trimco 562 is also made in 96mm and the two are close but not the same hole pattern.
4) Is the Orca Hardware CK-15030 knob a substitute for a Trimco 562 pull?
No. The Orca Hardware CK-15030 from the Bachelor Collection is a round cabinet knob, 1-1/4 inch in diameter, and a knob mounts on a single center screw. The Trimco 562 is a two-hole pull specified by center-to-center spacing, offered at 3-1/2 inch, 4 inch and 96mm. Swapping a 562 for the CK-15030 leaves you with two existing bores and a knob that covers only one, so the drawer face has to be filled and redrilled. The same applies to the Orca CK-16030 round ring knob at 1-1/4 inch diameter and the CK-17025 Blackcomb square knob at 25mm.
5) What finishes are available on the Trimco 562 drawer pull?
Ten finishes across every size: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, 626 satin chrome, 629 bright stainless steel, 630 satin stainless steel, and 710CU Healthy Hardware Steralloy Silver. All ten are offered in 3-1/2 inch, 4 inch, and 96mm center to center, so you can standardize a finish across a building and still mix hole spacings to suit the existing casework.
6) What is the 710CU Steralloy Silver finish on the Trimco 562, and where would I use it?
710CU is Trimco's Healthy Hardware Steralloy Silver, and the 562 carries the Healthy Hardware designation in its spec data. It's the finish to specify on touch surfaces in patient rooms, clinics, food service, and school casework, where the facility wants an antimicrobial copper-alloy touchpoint rather than a standard plated finish. It's available on all three hole spacings, so you can run it through a whole department without changing the drilling.
7) Should I use the Trimco 562 wire pull or the 553 for a high-traffic commercial job?
Trimco splits the two by duty. The 562 is the economical wire pull; the 553 is the heavy-duty pull in the same family. For drawers in a busy lobby, a shop, or dorm casework that gets yanked on all day, the 553 is the one built for it. The 562 is the right call on office millwork, multifamily unit kitchens, and back-of-house cabinets where the pull sees normal use and you're buying a lot of them.
8) What else could I buy at 4 inch center to center if the Trimco 562 wire style doesn't suit the design?
The Omnia 1968/102 Modern Cabinet Pull is forged solid brass at 4 inch center-to-center spacing, which is the same drilling as the 4 inch 562. It's a modern forged profile rather than a wire loop, so it reads heavier on the drawer front. If you want a projection figure to check knuckle clearance against a nearby wall or appliance, the Omnia 1970 lists 1-1/4 inch projection and the Omnia 1969 and 1971 both list 1-3/16 inch.
9) Can I use the Trimco 562 as an appliance pull or an edge pull?
No. The 562 is a two-hole drawer and cabinet pull topping out at 4 inch center to center, which is far too short to serve a refrigerator or range panel. For an appliance front, the Schaub 79-8 Steamworks is an 8 inch appliance pull. If what you actually need is a flush pull for a sliding or edge-mounted panel, look at the Schaub Sabre edge pulls, offered at 3, 4, and 5 inch center to center.
10) What should I use on a drawer face that is too narrow for a Trimco 562 pull?
Look at an edge pull instead of a face-mounted pull. The Schaub 10010 Sabre is an edge pull at 3 inch center-to-center, the Schaub 10011 at 4 inch and the Schaub 10012 at 5 inch. An edge pull is designed to be gripped from the top or side edge rather than standing off the face, which is the situation where a 562 wire pull at 3-1/2 inch, 4 inch or 96mm centers does not suit a slim or flush drawer front. If you need the same 4 inch bore spacing the 562 uses, the Schaub 10011 is the edge pull built to 4 inch centers.
11) What do I put on a refrigerator or range panel if the Trimco 562 is too small?
The Schaub 79-8 Steamworks is an 8 inch cabinet pull carried as an appliance pull, which is the length range appliance panels usually call for. The Trimco 562 tops out at 4 inch center-to-center among its inch sizes, so it is sized for drawers and cabinet doors rather than a full appliance front. A common approach on a kitchen or breakroom job is the 562 on the drawer bank and the Schaub 79-8 on the appliance panels.
12) How does the Emtek Bar Cabinet Pull compare to a Trimco 562 wire pull?
Both are bar-style cabinet pulls. The Emtek Bar Cabinet Pull is part of Emtek's Schaub Collection and is carried as a cabinet knob/pull; the Trimco 562 is a wire pull in the 562 Series made from stainless steel, brass or bronze and offered in 3-1/2 inch, 4 inch and 96mm center-to-center. The Trimco 562 is also the one to specify when you need the 710CU Healthy Hardware Steralloy Silver finish, which is the antimicrobial-alloy option in the 562 range and is often what healthcare and multi-family specs are after.
13) Is the Orca CK-12001 T-Pull Bar an equivalent to the Trimco 562?
They are both pulls, but they are not interchangeable on the same holes. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish, so it is specified by bar width rather than by the center-to-center spacing that governs the Trimco 562 at 3-1/2 inch, 4 inch and 96mm. Material differs as well: the CK-12001 is steel, and the Trimco 562 is made from stainless steel, brass or bronze. If the drawer bank is already bored on 562 centers, verify the CK-12001 mounting before committing to it across a fleet of doors.
14) Can I get the Trimco 562 pull in a size or style that isn't standard?
Trimco will manufacture custom sizes and styles of its cabinet pulls beyond the catalog offering. If your millwork drawing calls for a hole spacing other than 3-1/2 inch, 4 inch, or 96mm, or a profile that isn't the standard wire loop, that's a custom order rather than a stock pick. Trimco also makes back plates that mount behind these pulls if you're covering old drilling or protecting a painted drawer face.
15) I'm replacing pulls on drawers with old oversized holes. What can I do with the Trimco 562?
Trimco's Back Plates are made to go with these pulls, and that's the usual fix. The plate sits between the pull and the drawer face and covers the previous drilling, so you don't have to fill and refinish the fronts. Match the plate finish to the 562 finish you pick, whether that's 626 satin chrome, 613 oil rubbed bronze, or one of the other eight.
16) What is a decorative alternative to the Trimco 562 for a hospitality or period-style cabinet?
Emtek's Schaub Collection carries the Art Deco Cabinet Pull and the Alexander Cabinet Pull, both cabinet knob/pull items with a styled profile rather than the plain bent-wire form of the Trimco 562. The 562 answers a different requirement: it is offered in ten architectural finishes including 613 Oil Rubbed Bronze, 613E Dark Oxidized Satin Bronze and 622 Matte Black, which is what makes it easy to match to existing door hardware across a building. Choose on whether the specification calls for a decorative profile or for finish continuity with the rest of the hardware package.
17) Which Omnia cabinet pull should I look at if projection off the drawer face matters?
Omnia publishes projection on several of its forged solid brass modern pulls: the 1969 and the 1971 are both 1-3/16 inch projection, and the 1970 is 1-1/4 inch. Projection is the clearance between the drawer face and the back of the grip, which is what decides whether a gloved hand or a knuckle clears in a maintenance corridor or a galley run. The Trimco 562 is a wire pull specified by its 3-1/2 inch, 4 inch and 96mm center-to-center spacing; if you need a stated projection figure for a tight aisle, the Omnia 1970 at 1-1/4 inch is the deepest of that group.
18) Does the Emtek 8405 Select pull cover the same job as a Trimco 562?
Both are cabinet knob/pull items. The Emtek 8405 is part of the Emtek SELECT range in the Schaub Collection, built around mixing pull bodies and mounting posts within that system. The Trimco 562 is a single wire pull series in stainless steel, brass or bronze, offered in 3-1/2 inch, 4 inch and 96mm center-to-center and ten architectural finishes. For a commercial job standardizing one pull across many drawers in one finish, the 562 range is the simpler order; for a designed kitchen where the pull is built up from components, the 8405 system is the one to spec.
How fast can I get the Trimco 562-3.626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco 562-3.626 come with a warranty?
Absolutely. The Trimco 562-3.626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco 562-3.626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Trimco 562-3.626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!