You may also like
Trimco UHF210 Series Ultimate Hands-free Slide Lock
Model: TRI-UHF210
Trimco UHF210 Series Overview Trimco’s new, innovative UHF210 Series Ultimate Hands-Free Slide Lock is ideal for many applications and environments, and is an ideal solution for single occupancy...
Trimco
Starting at
$642.00
$411.54
AC330 Series Overview
Trimco’s Hands-Free Adjustable Pulls are uniquely designed to make the world healthier, while being durable, flexible, and highly customizable. These patent pending pulls have an adjustable hands-free bend that can pivot during installation to achieve different clearances for hands-free operation. The AP330 Series Pulls come standard with adjustable standoffs for worry-free retrofit of current door pulls and easy access to lock cylinders. The AP330 hands-free pulls are available in 710 Healthy Hardware® and stainless steel. The Healthy Hardware 710CU Finish is made from bactericidal copper alloy touch surfaces that are registered with the U.S. Environmental Protection Agency (EPA), and when cleaned regularly, have been proven to kill 99.9% of infectious bacteria* like e-Coli, MRSA, Staph & VRE. It is not a coating; it’s an all-natural, solid copper-based alloy that will never wear off.
For glass doors, see the AP330 Series for Glass Doors
FINISH NOTES
- 710CU Finish includes stainless steel standoffs
- 710CU is a true "living" finish and will patina over time; due to the natural and expected changes, these finishes are not warrantied
FEATURES & BENEFITS
- Available with EPA registered Healthy Hardware® Copper Nickel alloy touch surfaces
- Hands-free feature can be pivoted during installation to achieve different clearance for hands-free operation
- Convenience of opening a door when your hands are full
- Adjustable standoffs are versatile for worry-free retrofit of existing door pulls and enables access to locking cylinders
- Healthy Hardware (710) has appearance similar to stainless steel and is easily cleaned and polished
- 1-1/2” clearance conforms to ADA guidelines for accessibility
APPLICATIONS
- Commercial & Industrial Buildings
- Government & Military Facilities
- Retail & Strip Malls
- Hospitality
- Multifamily & Mixed-Use
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Series:
- AP300 Series
- ADA Compliant:
- Yes
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- Subcategory:
- Door Pulls, Push and Pull Plates
- Door Type:
- Aluminum, Wood
- Commercial/Residential:
- Commercial
- Healthy Hardware:
- Yes
- Product Model:
- AP331, AP333
- Product Projection:
- 1"
- Product Category:
- Door Trim and Accessories
- Collection:
- AP300 Series
- Department:
- Door Hardware
Trimco TRI-AP331E-19-4.630 – Frequently Asked Questions
1) Can I put a Trimco AP330 hands-free pull on a glass entrance door?
Not this configuration. Door type for the AP330 hands-free adjustable pull is aluminum and wood. Trimco builds a separate AP330 Series for glass doors, and that is the one to order for a glass leaf, since a glass door needs its own through-glass mounting rather than the standoffs used here.
2) Will the Trimco AP330 pull go back on the holes from the pull I am taking off?
Adjustable standoffs come standard on the AP330 hands-free pull, and Trimco put them there for retrofit of existing door pulls, so the standoff positions can be shifted to pick up hole spacing already in the door instead of drilling a fresh prep and patching the leaf. That same adjustment is what keeps the bar clear of a lock cylinder. It will not rescue every prep, but on a like-for-like pull swap it is the reason this one goes back on the existing holes.
3) How does the hands-free operation on the Trimco AP330 pull actually work, and does it meet ADA?
The hands-free bend on the bar pivots during installation, so the installer sets the clearance the opening needs and the door is then pulled with a forearm, elbow or wrist when hands are full. Trimco lists the AP330 as ADA compliant, with 1-1/2 inch clearance conforming to ADA accessibility guidelines. Because the bend is set at install rather than fixed at the factory, one part number covers openings that need different clearance.
4) If the hands-free forearm feature is not required, what ADA offset pull can I run on a commercial door instead of the Trimco AP330?
The Trimco AP330 is specified where a 1-1/2 inch clearance conforming to ADA guidelines is wanted together with a bend that pivots during installation for hands-free operation. Where the drawing calls only for an accessible pull, the Ives 8145EZHD is a 45 degree offset door pull, ADA compliant, supplied with heavy duty mounting hardware. For a straight bar, the Ives 8102HD is a heavy duty straight door pull on a 3/4 inch round bar with 1-1/2 inch clearance, the same clearance figure the AP330 carries.
5) My commercial doors are 2-1/4 inch thick. Can I use the Deltana OHP620 back-to-back pull in place of the Trimco AP330 hands-free bar?
No. The Deltana OHP620 off-set handle pull back-to-back set is built for a door thickness range of 1-1/8 inch to 1-3/8 inch, so it does not reach a 2-1/4 inch leaf. The Trimco AP330 hands-free adjustable pull is ordered by door thickness in 1-3/8 inch, 1-3/4 inch, 2 inch, 2-1/4 inch, 2-1/2 inch and 3 inch, so a 2-1/4 inch door is a standard build. Specify the AP330 in the 2-1/4 inch door thickness with the mounting and standoff style your opening calls for.
6) I am replacing existing door pulls and do not want to drill new holes. Which pulls deal with an existing hole pattern?
The Trimco AP330 comes standard with adjustable standoffs, which is what makes it a retrofit part: the centers can be set to the holes already in the door, and the same adjustment keeps a lock cylinder reachable. Among the alternatives, the ABH AB3330 offset round end pull is offered with custom length options, so the pull can be made to the centers you measure. The Ives 8103HD heavy duty straight pull, 1 inch round, and the ABH AB7200 solid stainless steel flat end pull, 7/8 inch diameter, are both through-bolt mounted, which means the door is prepped to the pull rather than the pull adjusted to the door.
7) What do I need to specify to order a Trimco AP330 hands-free adjustable pull?
Four decisions. Door thickness (1-3/8, 1-3/4, 2, 2-1/4, 2-1/2 or 3 inches), mounting method (E-Mount or G-Mount), standoff style (straight or offset), and finish (630 satin stainless steel or 710CU Healthy Hardware Steralloy Silver). The AP330 hands-free family covers models AP331 and AP333 within Trimco's AP300 Series.
8) Will the AP330 pull bar block the cylinder on my aluminum storefront door?
Cylinder access is one of the reasons the standoffs adjust; Trimco calls that out directly, and standoffs are offered straight or offset so the bar can be moved off a cylinder or a rail that sits in its path. Projection on the AP330 is 1 inch. If the cylinder falls close to the pull line, order the offset standoff.
9) What is a straight bar door pull alternative if I don't need the hands-free bend?
Three worth looking at: the ABH AB3300 straight flat end pull at 1.00 inch diameter, the Ives 8103HD 1 inch round pull with through-bolt mounting, or the ABH AB7200 solid stainless flat end pull at 7/8 inch diameter, also through-bolted. All three are fixed bar pulls. What you give up against the Trimco AP330 is the pivoting hands-free bend and the adjustable standoffs, so hole spacing has to match the prep you have rather than being dialed in at install.
10) My doors are 2-1/2 inches thick. Which door pull will actually mount on them?
The Trimco AP330 hands-free pull is ordered by door thickness and 2-1/2 inches is one of its stock options, along with 1-3/8, 1-3/4, 2, 2-1/4 and 3 inches. Thickness is where a lot of pull sets run out: the Deltana OHP620 off-set handle pull, for instance, is a back-to-back set covering 1-1/8 to 1-3/8 inch doors, so it is not an option on a leaf that thick. Confirm the thickness at the stile before you order, because it drives the fasteners.
11) What if I want the antimicrobial copper touch surface, and what if I do not?
The Trimco AP330 is ordered in two finishes: 710CU Healthy Hardware Steralloy Silver, an EPA registered solid copper based alloy touch surface that is not a coating and, when cleaned regularly, has been proven to kill 99.9 percent of infectious bacteria such as e-Coli, MRSA, Staph and VRE, and 630 Satin Stainless Steel for openings where that is not part of the spec. Note that 710CU is a living finish that patinas over time. If a plain stainless bar is all the job calls for, the ABH AB7200 is a solid stainless steel flat end pull handle, 7/8 inch diameter, with through-bolt mounting, and the ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter.
12) Is the Cal-Royal PUL-175 the same kind of part as the Trimco AP330 hands-free pull?
No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, stainless steel construction. It is the small pull that mounts at a rim cylinder so the door can be pulled shut at the lock. The Trimco AP330 is a full-length hands-free adjustable pull whose adjustable standoffs are set to clear the lock cylinder while giving a grip that can be operated with a forearm. On an opening with a rim cylinder, the two are complementary rather than interchangeable.
13) I need a pull on both faces of the door as a matched set. Does the Trimco AP330 cover that, or should I look at something else?
The Trimco AP330 hands-free adjustable pull is specified per opening by door thickness, from 1-3/8 inch up to 3 inch, in E-Mount or G-Mount with straight or offset standoffs, and its adjustable standoffs are what let it land on an existing prep. Where the order is written as a back-to-back pair, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set, the Deltana SSPORBB24 is the 24 inch back-to-back round offset version of the same idea, and the Deltana OHP620 is an off-set handle pull back-to-back set for doors 1-1/8 inch to 1-3/8 inch.
14) The drawing calls for a specific pull length. What are the comparable pulls when the AP330 size does not match?
Lengths across the comparable pulls run short to long. The Deltana SSP1210 is a 12 inch contemporary pull, single side. The Emtek Art Nouveau, Arts and Crafts, Baden and Brisbane pulls are 8 inch. The Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back sets, modern offset and round offset respectively. The ABH AB3330 offset round end pull is offered with custom length options when the centers on the drawing do not match a catalog size.
15) I need new pulls to match the satin stainless hardware already on my building. Which Trimco AP330 finish should I order?
Order 630 satin stainless steel. The 710CU Healthy Hardware Steralloy Silver reads close to stainless when new, but it is a living finish that patinas over time, so on a run of doors where only some get replaced it will drift away from the untouched openings. If the whole entrance or the whole floor is being changed at once and infection control matters, 710CU across all of them is the cleaner call.
16) Straight or offset - how do the comparable pulls break down by shape and bar size?
The Trimco AP330 is ordered with either straight standoffs or offset standoffs, so one part number covers both profiles. Among the alternatives, the ABH AB3300 is a straight flat end pull at 1.00 inch diameter and the ABH AB3310 is the offset flat end version, surface mounted, commercial grade. The ABH AB3330 is an offset round end pull. The Ives 8103HD is a straight pull, 1 inch round, through bolted, while the Ives 8102HD is a straight pull on a 3/4 inch round bar with 1-1/2 inch clearance, and the Ives 8169 is a C style offset solid pull at 1 inch diameter with heavy duty mounting.
How fast can I get the Trimco TRI-AP331E-19-4.630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-AP331E-19-4.630 come with a warranty?
Absolutely. The Trimco TRI-AP331E-19-4.630 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-AP331E-19-4.630?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-AP331E-19-4.630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.
