Trimco 7001 fOCAL Self Adhesive Push Plate (4" x 16")

No drilling. The fOCAL push plate sticks on with heavy duty adhesive tape instead of screws, so there are no fastener holes in the face of the door and nothing to break through a hollow metal skin. That makes it a clean way to add a push plate to an existing door, and the trade-off is the usual one for a taped plate: the door face has to be smooth, sound and clean for the tape to hold.

The 7001 fOCAL is the 4 x 16 inch plate. Trimco builds the same fOCAL plate in a 6 x 16 inch standard size as well, and custom sizes are made to order. Pick the 4 inch width when the stile is narrow or you want a lighter look, the 6 inch when you want more hand coverage on a door that takes heavy traffic.

Eleven finishes cover most standard hardware schedules: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, 626 satin chrome, 628 satin aluminum, 629 bright stainless, 630 satin stainless, and 710CU Healthy Hardware Steralloy Silver. Those are BHMA finish numbers, so if your existing levers and closers are specified 626 or 630, order the plate in the same number and it will match the schedule.

The Trimco 7001 fOCAL is a flat 4 inch by 16 inch push plate mounted with heavy duty adhesive tape, so it is meant for the push side of a door where the hand presses flat against the surface. When the opening needs something the hand wraps around instead, the Ives 8102HD is a heavy duty straight door pull built on a 3/4 inch round bar with 1-1/2 inch clearance, and the Ives 8103HD is a heavy duty straight pull with a 1 inch round bar and through bolt mounting. A common commercial pairing is a push plate on the push side and a straight pull on the pull side.

The Trimco 7001 fOCAL is held on with heavy duty adhesive tape, which is what gives it the clean face with no visible fasteners. On an opening where the hardware must be mechanically fastened through the door, the Ives 8103HD is a heavy duty straight pull with through bolt mounting, and the ABH AB7200 is a solid stainless steel flat end pull with a 7/8 inch diameter and through-bolt mounting. Through bolting puts the load on fasteners passing through the door rather than on a surface bond.

The Trimco 7001 fOCAL is a push plate, so it presents a flat pushing surface rather than a graspable handle. Among commercial door pulls, the Ives 8145EZHD is a 45 degree offset door pull described as ADA compliant in the EZ Series with heavy duty mounting hardware. On an opening where the pull side has to meet an accessibility requirement, the offset pull is the piece that carries that description, with a push plate handling the opposite face.

The Trimco 7001 fOCAL bonds to the door face with heavy duty adhesive tape, so it does not depend on the door thickness or require boring. Among back-to-back pulls, the Deltana OHP620 off-set handle pull set is rated for a door thickness range of 1-1/8 inch to 1-3/8 inch, which is the check to make before ordering a through-mounted set. On a thin door where drilling is unwelcome, the adhesive plate avoids the thickness question entirely.

Material is .050 inch stock, made in the United States, in stainless steel, bronze or brass depending on the finish you order. The 629 and 630 stainless finishes are the usual pick for high-traffic commercial and healthcare openings; the 605 and 606 brass finishes and the 613 and 613E bronze finishes are the ones that match older brass and bronze hardware sets.

710CU is Trimco's Healthy Hardware Steralloy Silver, a copper-bearing finish. It is the one specified for touch surfaces in healthcare, senior living and food service where the facility wants a copper alloy on the contact points rather than plain stainless. Everything else about the plate is the same, so it drops in wherever the 630 satin stainless version would go.

A push plate takes flat hand pressure, not leverage, which is why the adhesive mounting holds up on commercial and industrial buildings, retail, hospitality and multifamily openings. Where the hardware takes real pulling force you want mechanical fastening instead: the Ives 8103HD and the ABH AB7200 solid stainless pull are both through-bolt mounted for that reason. Do not substitute a taped plate for a bolted pull on a door that gets yanked open all day.

It works well for fleet standardization. One part number, one size at 4 x 16 inches, eleven finishes, and no drilling means maintenance staff can install it on existing doors without a template or a hole saw. Order the whole building in a single BHMA finish number so replacements years from now still match, and keep the same number on any 6 x 16 plates you use on wider doors.

The Trimco 7001 fOCAL is a flat plate, .050 inch stainless steel, bronze or brass, that sits against the door face and is bonded with adhesive tape. Offset pulls stand the grip away from the door on angled posts: the ABH AB3310 is an offset flat end door pull for commercial surface mount, and the Ives 8169 is a C style offset solid pull of 1 inch diameter with heavy duty mounting. The offset geometry leaves hand clearance behind the bar; the push plate has no projection at all.

No, those solve different sides of the opening. The Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set and the Deltana SSPORBB24 is a 24 inch back-to-back round offset set, meaning a matching pull lands on both faces of the door and the two halves fasten to each other. The Trimco 7001 fOCAL is a single 4 inch by 16 inch plate applied to one face with adhesive tape. A back-to-back set puts a grip where the push plate would go, so the two are not interchangeable on a door meant to be pushed open flat.

No. The Trimco 7001 fOCAL is a push plate applied to the door face with adhesive tape to take hand contact and keep the door clean. The part that serves a rim cylinder application is the Cal-Royal PUL-175 night latch cylinder pull, 3-1/2 inches in height and stainless steel construction. If the requirement is to pull the door by the cylinder on a night latch function, the PUL-175 is the item; the 7001 plate does not address a cylinder.

The Trimco 7001 fOCAL comes in standard sizes of 4 inch by 16 inch and 6 inch by 16 inch, with custom sizes also made. For a longer element on the pull side, the ABH AB3330 series is an offset round end pull with custom length options, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls. The Deltana SSP1210 is a 12 inch contemporary pull for a single side where a shorter grip suits the door.

The Trimco 7001 fOCAL is made in the United States from .050 inch stainless steel, bronze or brass, and is offered in 629 Bright Stainless Steel, 630 Satin Stainless Steel and 710CU Healthy Hardware Steralloy Silver, giving a flat wipeable pushing surface. On the pull side of the same openings, the ABH AB7200 is a solid stainless steel flat end pull of 7/8 inch diameter with through-bolt mounting, and the ABH AB3300 is a straight flat end commercial door pull of 1.00 inch diameter. Specifying the plate and the pull together keeps one material story across the facility.