You may also like
TRN 3000 Series
Trine 234FX-375 – 3000 Series Electric Strike Faceplate, 2-3/4″ x 1-1/8″, 3/8″ Extended Lip
Key Features
- Standard ANSI prep features an extended ramp to accomodate additional frame face of Timely or RediFrame. Ramp is extended 3/8″. For new or replacement installations. Use with cylindrical locksets and deadlatches having up to 5/8″ throw, based on 1/8″ door gap.
- Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS
- ANSI 2 3/4″ Standard • Face Plate 2-3/4″ x 1-1/8″ • Mortise Backset 1″ • Cavity Depth 1/2″ • Cavity Width 5/8″ • Cavity Height 1 1/8″
- Ramp is extended 3/8”
- Smallest faceplate for your Timely Frames installation
- Grade 1 Faceplate
- 80% less cutting of the frame
- Modular System: Always be prepared, go Modular. Use ANY of the 9 faceplates in the 3000 series with any 3012, 3024, 30LC or 30RS mechanism
Specifications
| Brand | |
|---|---|
| Finishes |
US3 (605) Bright Brass, US32D (630) Satin Stainless Steel |
| Faceplate |
2-3/4" x 1-1/8" |
| Lock Type Compatibility |
Cylindrical Lock, Deadlatch |
| Part Type |
Electric Strike Faceplate |
| Buy American Act Compliance |
Meets Buy Amercian Act – Made in USA |
Specifications Sheet
Manufacturer Resources
Product Specs
- Series:
- 3000
- Product Type:
- Electric Strikes
- Configuration:
- Centered
- Lock Type Compatibility:
- Cylindrical Lock, Deadlatch
- Part Type:
- Electric Strike Faceplate
- Installation:
- Commercial
- Product Model:
- 234FX-375
- Face Plate:
- 2 3/4" x 1 1/8"
- Department:
- Door Hardware
- Product Usage:
- Standard Duty
Trine 234FX-375-32D – Frequently Asked Questions
1) What is the Trine 234FX-375 and does it include the electric strike mechanism?
The 234FX-375 is a faceplate only, part of Trine's 3000 Series modular electric strike system. You pair it with a 3000 Series mechanism, so you need to order one of those separately: the 3012, 3024, 30LC or 30RS. The plate measures 2-3/4 by 1-1/8 inches with a ramp extended 3/8 inch.
2) Why does this Trine faceplate have a 3/8 inch extended lip?
The extended ramp is there for Timely and RediFrame openings, where the frame face sits proud of a standard hollow metal jamb. Extending the ramp 3/8 inch picks up that extra frame face so the latch rides in cleanly. On a standard hollow metal frame you would use a non-extended 3000 Series plate instead.
3) Will the Trine 234FX-375 work with a cylindrical lockset or a deadlatch?
Yes on both. The 234FX-375 is cut for cylindrical locksets and deadlatches with up to a 5/8 inch throw, based on a 1/8 inch door gap. It is not for mortise locks with a deadbolt or for exit device rim latches.
4) What frame prep and cavity dimensions does the Trine 3000 Series 234FX-375 faceplate need?
It uses the standard ANSI 2-3/4 inch prep: mortise backset 1 inch, cavity depth 1/2 inch, cavity width 5/8 inch, cavity height 1-1/8 inch. Because it is the smallest faceplate in the 3000 Series for a Timely frame, Trine states it cuts frame work by about 80 percent compared to a full ANSI cutout.
5) Can I swap a different 3000 Series faceplate onto the same Trine strike mechanism later?
Yes. The 3000 Series is modular: any of the nine faceplates in the series mounts to any 3012, 3024, 30LC or 30RS mechanism. If a frame turns out to need a different plate on site, you change the plate and keep the mechanism.
6) Is the Trine 234FX-375 faceplate suitable for a government or federally funded job?
It is made in the USA and meets the Buy American Act per Trine. It is also a Grade 1 faceplate rated for commercial, standard duty use.
7) Is the Trine 234FX-375 only for new frames, or can it go into an existing opening?
Both. Trine lists it for new or replacement installations. On a replacement, confirm the existing cutout matches the ANSI 2-3/4 inch prep with a 1 inch mortise backset, and that the latch in the door is a cylindrical latch or deadlatch throwing no more than 5/8 inch.
8) What finishes does the Trine 234FX-375 faceplate come in?
Two: 630 satin stainless steel and 605 bright brass. Satin stainless is the usual match for commercial lever hardware and hollow metal openings; bright brass suits older brass trim packages.
9) Is the strike opening on this Trine plate centered or offset?
Centered. The 234FX-375 has a centered cutout in the 2-3/4 by 1-1/8 inch plate, which is what you want when the jamb prep is symmetrical about the latch centerline rather than shifted toward the stop.
How fast can I get the Trine 234FX-375-32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trine 234FX-375-32D come with a warranty?
Absolutely. The Trine 234FX-375-32D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trine 234FX-375-32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trine 234FX-375-32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.