You may also like
TRN 3000 Series
Trine 234X-375 – 3000 Series Electric Strike Faceplate, 2-3/4″ x 1-1/8″, 3/8″ Extended Lip
Key Features
- Standard ANSI prep features an extended ramp to accomodate additional frame face of Timely or RediFrame. Ramp is extended 3/8″. For new or replacement installations. Use with cylindrical locksets and deadlatches having up to 5/8″ throw, based on 1/8″ door gap.
- Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS
- ANSI 2 3/4″ Standard • Face Plate 2-3/4″ x 1-1/8″ • Mortise Backset 1″ • Cavity Depth 1/2″ • Cavity Width 5/8″ • Cavity Height 1 1/8″
- Ramp is extended 3/8”
- Smallest faceplate for your Timely Frames installation
- Grade 1 Faceplate
- 80% less cutting of the frame
- Modular System: Always be prepared, go Modular. Use ANY of the 9 faceplates in the 3000 series with any 3012, 3024, 30LC or 30RS mechanism
Specifications
| Brand | |
|---|---|
| Finishes |
Dark Bronze Powder Coat, US3 (605) Bright Brass, US26D (626) Satin Chrome |
| Faceplate |
2-3/4" x 1-1/8" |
| Lock Type Compatibility |
Cylindrical Lock, Deadlatch |
| Part Type |
Electric Strike Faceplate |
| Buy American Act Compliance |
Meets Buy Amercian Act – Made in USA |
Specifications Sheet
Manufacturer Resources
Product Specs
- Series:
- 3000
- Product Type:
- Electric Strikes
- Configuration:
- Centered
- Lock Type Compatibility:
- Cylindrical Lock, Deadlatch
- Part Type:
- Electric Strike Faceplate
- Installation:
- Commercial
- Product Model:
- 234X-375
- Face Plate:
- 2 3/4" x 1 1/8"
- Department:
- Door Hardware
- Product Usage:
- Standard Duty
Trine 234X375 -26D – Frequently Asked Questions
1) Will the Trine 234X-375 faceplate work on a Timely or RediFrame installation?
That is exactly what the 234X-375 is built for. It uses the standard ANSI prep but the ramp is extended 3/8 inch to clear the extra frame face you get on a Timely or RediFrame. It is the smallest faceplate in the Trine 3000 range for a Timely frame installation, and the extended ramp means roughly 80 percent less cutting of the frame than a full-size plate.
2) Which Trine 3000 Series electric strike mechanisms does the 234X-375 faceplate fit?
All of them. The 3000 Series is modular, so the 234X-375 plate mounts to the 3012, 3024, 30LC or 30RS mechanism. Order the plate and the mechanism separately and pair whichever combination the opening needs.
3) Can I use this Trine faceplate with a mortise lock?
No. The 234X-375 is prepped for cylindrical locksets and deadlatches with up to a 5/8 inch throw, based on a 1/8 inch door gap. A mortise lock with a latch and auxiliary deadbolt will not seat in this cavity, so you need a mortise-type strike faceplate instead.
4) Is the Trine 234X-375 faceplate Grade 1?
Yes, it is a Grade 1 faceplate. Note the strike is rated standard duty for commercial installation, so it suits normal commercial traffic openings rather than high-abuse applications.
5) Does the Trine 234X-375 meet Buy American Act requirements for a government job?
Yes. The 234X-375 faceplate is made in the USA and meets the Buy American Act, which is what a federal, state or institutional spec usually asks for on electrified door hardware.
6) Can I just swap the faceplate on an existing Trine 3000 strike instead of replacing the whole unit?
Yes. The 3000 Series splits the plate from the mechanism, so if the frame face changed or the original plate was damaged you can fit the 234X-375 to the existing 3012, 3024, 30LC or 30RS body. It is listed for new construction and replacement installs alike.
7) Is the 234X-375 faceplate centered or offset?
Centered. The keeper cavity sits centered on the 2-3/4 by 1-1/8 inch plate, so latch alignment follows the standard ANSI 2-3/4 prep rather than shifting up or down the frame.
How fast can I get the Trine 234X375 -26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trine 234X375 -26D come with a warranty?
Absolutely. The Trine 234X375 -26D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trine 234X375 -26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trine 234X375 -26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.