You may also like
TRN 3000 Series
Trine 458 – 3000 Series Electric Strike Faceplate, 4-5/8″ x 1-9/16″
Key Features
- Trine 458 – 3000 Series Electric Strike Faceplate, 4-5/8″ x 1-9/16″, Retrofits Long Adams Rite Strike
- 80% LESS FRAME CUTTING. Fills the frame preparation of Adams Rite MS Locks without relocating tabs for 6 7/8″ electric strikes. For new or replacement installations in aluminum frames. Replaces Adams Rite 4730/4501 strike plate with slight frame modification.
- Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS
- Face Plate 4-5/8″ x 1-9/16″ • Mortise Backset 1″ • Cavity Depth 1/2″ • Cavity Width 5/8″ • Cavity Height 1 1/8″
- Faceplate for your aluminum door installation.
- Grade 1 faceplate.
- 80% less cutting of the frame.
- * Must Specify Handing of item when ordering.*
- Modular System: Always be prepared, go Modular. Use ANY of the 9 faceplates in the 3000 series with any 3012, 3024, 30LC or 30RS mechanism
Specifications
| Brand | |
|---|---|
| Finishes |
Dark Bronze Powder Coat, ALUM Aluminum |
| Faceplate |
4-5/8" x 1-9/16" |
| Lock Type Compatibility |
Deadlatch |
| Part Type |
Electric Strike Faceplate |
| Buy American Act Compliance |
Meets Buy Amercian Act – Made in USA |
Specifications Sheet
Manufacturer Resources
Product Specs
- Series:
- 3000
- Product Type:
- Electric Strikes
- Configuration:
- Centered
- Lock Type Compatibility:
- Deadlatch
- Part Type:
- Electric Strike Faceplate
- Installation:
- Commercial
- Product Model:
- 458
- Face Plate:
- 4 5/8" x 1 9/16"
- Department:
- Door Hardware
- Product Usage:
- Standard Duty
Trine 458-ALUM-LH – Frequently Asked Questions
1) Will the Trine 458 faceplate fill the frame cutout left by an Adams Rite strike?
That is what the 458 is built for. It retrofits the long Adams Rite strike and fills the frame preparation of Adams Rite MS locks without relocating tabs for 6-7/8 inch electric strikes. It replaces an Adams Rite 4730/4501 strike plate with slight frame modification, and Trine rates the job at about 80 percent less frame cutting than starting fresh.
2) Does the Trine 458 electric strike faceplate come with the strike mechanism, or do I order that separately?
The 458 is the faceplate only. It is part of Trine's modular 3000 Series, so you pair it with a mechanism: the 3012, 3024, 30LC or 30RS. Any of the nine 3000 Series faceplates works with any of those four mechanisms, so order the faceplate that matches your frame prep and the mechanism that matches your voltage and function.
3) Do I have to specify handing when ordering the Trine 458 faceplate?
Yes, handing has to be called out. The 458 is ordered left hand or right hand, and the wrong hand will not work on the opening. It also comes in two finishes, aluminum powder coat and dark bronze powder coat, and both finishes are offered in either hand.
4) What are the cutout dimensions for the Trine 458 strike faceplate?
The 458 faceplate measures 4-5/8 by 1-9/16 inches, with a 1 inch mortise backset. The cavity behind it is 1/2 inch deep, 5/8 inch wide and 1-1/8 inch high. Those are the numbers to check against your aluminum frame prep before cutting anything.
5) Is the Trine 458 faceplate right for an aluminum storefront door with a deadlatch?
That is exactly the application. The 458 is made for new or replacement installs in aluminum frames, and its lock type compatibility is a deadlatch. It is a commercial, standard duty faceplate, centered configuration.
6) Can I use the Trine 458 on a federally funded project with domestic sourcing requirements?
The 458 faceplate meets the Buy American Act and is made in the USA, which is what most federal and state procurement specs are looking for on door hardware line items.
7) Is the Trine 458 a Grade 1 faceplate?
Yes, the 458 is a Grade 1 faceplate. Note that the grade statement covers the faceplate itself; the mechanism you pair it with, 3012, 3024, 30LC or 30RS, is a separate part.
8) I manage several storefront entries with different frame preps. Do I need a different Trine strike for each one?
Not a different strike, just a different faceplate. The 3000 Series is modular: stock one mechanism type across the building and swap the faceplate to suit each frame. The 458 at 4-5/8 by 1-9/16 inches is the one that drops into Adams Rite MS lock prep, and there are nine faceplates in the series covering other preps, all working with the same 3012, 3024, 30LC and 30RS mechanisms.
How fast can I get the Trine 458-ALUM-LH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trine 458-ALUM-LH come with a warranty?
Absolutely. The Trine 458-ALUM-LH is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trine 458-ALUM-LH?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trine 458-ALUM-LH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.