WAC Lighting 36" Basics and Ge...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$22.00
$17.95
WAC Lighting - 36" Basics & Gemini 24VDC Joiner Cable

WAC Lighting 36" Basics and Gemini 24VDC Joiner Cable

(No reviews yet) Write a Review

Model: T24-BS-IC-036-BK
From the Basics & Gemini Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$22.00
$17.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting - 36" Basics and Gemini 24VDC Joiner Cable

Build an economical and versatile layered LED Tape light system using Basics or Gemini. Basics & Gemini LED tape lights are easy-to-setup with seamless and scalable run lengths, sharing power supplies and components. Basics LED Tape delivers precision and performance with two selectable power outputs and five selectable color temperatures from warm 2700K to cool 5000 Kelvin. Gemini is a continuous phosphorus (COB) tape that eliminates unsightly diode imaging and great for applications where the LED Tape Light is reflected or in direct sight.

  • Basics & Gemini 24VDC In-Wall Rated Joiner Cable 36in Length
  • Joiner cables can be used to connect two strips of Basics & Gemini Tape Light together with power continuity.
  • Flexible and customizable with a low profile. Use with universal input voltage 120-220-277V power supply: PS-24DC-U and T24-BS-EX2 lead wire required or 120VAC power supply: EN-BT60 with lead wire included.
  • Basics LED tape light can be cut in the field every 4in and re-connected with safe and secure connectors. Gemini LED tape light can be cut in the field every 2in and re-connected with safe and secure connectors. Smooth robust illumination deployed from evenly placed UV coated LEDs for cove, accent and task lighting applications.
  • Smooth and continuous dimming with an electronic low voltage dimmer (ELV), TRIAC or 0-10V (0-10V only available with PS-24DC-U power Supply). Dimmers should be installed on the primary side of the transformer. Driver input voltage: 120V-220V-277V AC, Driver output voltage: 24V DC. Driver is available in a 288W max load.
  • High Powered LED's 90+ CRI, Rated Hours: 80,000, Voltage: 24V, Lumen Options: 100+ lm/ft, or 200+ lm/ft.
  • Standards: UL & cUL Listed for Damp Locations IP20 rated. CEC Title 24 & ADA Compliant.

Features

  • Extends distance between sections
  • Can be mounted on ceiling or wall in all orientations

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

ADA Compliant:
Yes
Collection:
Basics & Gemini
Hardwired or Portable:
Plugin
Product Type:
Connector
Warranty:
5 Years Functional, 2 Years Finish
Product Group:
Indoor Lighting
Product Subgroup:
Accessories
Base Material:
Aluminum
Location Rating:
Damp
Brand Family:
WAC Limited
CEC Listed:
Yes
Energy Star:
Yes
Wire Length:
36"
Subcategory:
LED Tape Lighting
Certification:
UL, cUL, IP20
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Segment:
Lighting
Product Voltage:
24V
Product Length:
0.38"
Mounting Method:
Any
Product Style:
Functional
Product Height:
0.57"
Product Category:
Task & Cove
Product Width:
38"
Department:
Electrical

WAC Lighting T24-BS-IC-036-BK – Frequently Asked Questions

1) What does the WAC Lighting T24-BS-IC-036 joiner cable actually do in a tape light run?
It links two separate sections of WAC Basics or Gemini 24VDC LED tape light while carrying power through, so the run stays electrically continuous across a gap. The cable is 36 inches long, which lets you jump a corner, a cabinet break, or a framing obstruction without cutting into the tape's power feed. It is in-wall rated, so the jump can be concealed.
2) Will this joiner cable work with WAC Gemini COB tape as well as Basics tape?
Both. The cable is built for the Basics and Gemini 24VDC families, which share power supplies and components, so the same joiner serves either tape. Gemini is the continuous phosphor (COB) tape used where the light is in direct sight or reflected; Basics is the diode tape with selectable outputs and color temperatures. Either way the system runs at 24V DC.
3) What else do I need to order to power a Basics or Gemini tape run besides the joiner cable?
The joiner only bridges two tape sections, it does not feed power. For a universal 120-220-277V supply you need the PS-24DC-U plus a T24-BS-EX2 lead wire, which is sold separately. If you go with the 120VAC EN-BT60 supply, the lead wire comes with it. The PS-24DC-U is also the only route to 0-10V dimming; ELV and TRIAC dimming are supported, and the dimmer goes on the primary side of the transformer.
4) Can the joiner cable be run inside a wall or through a cabinet partition?
Yes, it is an in-wall rated 24VDC joiner, so it can be concealed rather than surface-run. Location rating is damp and indoor only, IP20, with UL and cUL listing. Keep it out of wet exterior locations.
5) Does this cable meet Title 24 and ADA requirements for a commercial job?
The Basics and Gemini 24VDC system this joiner belongs to is CEC Title 24 compliant and ADA compliant, with UL and cUL listing for damp locations at IP20. It also carries an Energy Star designation. Those are the lines an institutional or municipal spec reviewer usually asks for.
6) If I cut a Basics tape light in the field, can I reconnect the pieces with this joiner?
Yes, that is the point of it. Basics tape can be cut every 4 inches and Gemini every 2 inches, then re-terminated with secure connectors; the 36 inch joiner carries power from one cut section to the next. Plan cut points on the tape's marked intervals so the connection lands correctly.
7) What color options does the 36 inch Basics joiner cable come in, and does it matter?
Two: black (T24-BS-IC-036-BK) and white (T24-BS-IC-036-WT). Pick whichever disappears against the surface, since the jumper is often the one visible piece in a cove or under-cabinet run. White for painted drywall and white cabinet interiors, black for dark channel or ceiling work.
8) Can I mount a Basics tape run vertically or on a ceiling with joiner cables between sections?
Yes. The joiner can be mounted on ceiling or wall in any orientation, and mounting method is listed as any. That makes it workable for cove, accent and task layouts where the run turns from a horizontal soffit up onto a wall.
How fast can I get the WAC Lighting T24-BS-IC-036-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting T24-BS-IC-036-BK come with a warranty?
Absolutely. The WAC Lighting T24-BS-IC-036-BK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting T24-BS-IC-036-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting T24-BS-IC-036-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!