WAC Lighting 6.13" WAC LED 12V Wall Wash
Function meets durability with this LED 3in inground well light available in 12V or 120V and 2700K or 3000K color temperatures. A mechanical dial at the base provides smooth integral brightness control and the Mini Wall Wash (SKU # 5021) includes a Second mechanical dial to toggle between 2700K and 3000K color temperatures. One sku fits most applications, eliminating the need to choose from dozens of light bulbs with varying light outputs when compared with traditional landscape lights. This wall wash is factory sealed and water tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Includes a 9in mounting spike for 12V fixtures (120V fixtures require Sku# M6000-STAKE, power stake sold separately), and a 3ft lead wire with two gel filled direct burial wire nuts. Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments. Solid brass coated in bronze (-BBR finish) is available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.- Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Solid brass coated in bronze (-BBR finish) is available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.
- This wall wash light is factory sealed and water tight with an IP66 rating that provides protection against high-pressure water jets and outdoor elements.
- A mechanical dial at the base provides smooth integral brightness control and the Mini Wall Wash (SKU # 5021) includes a Second mechanical dial to toggle between 2700K and 3000K color temperatures.
- Includes a 9in mounting spike for 12V fixtures (120V fixtures require Sku# M6000-STAKE, power stake sold separately) and a 3ft lead wire with two gel filled direct burial wire nuts. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.
- High Powered LED, Input: 9-15V AC, Power: 2-16W (23VA), Brightness: 190-980Lm, Beam Angle: 80Deg, CRI: 85, Rated Hours: 70,000. CCT: 27000K or 3000K order accordingly (Note 5121 Mini Accent includes dual-CCT). Smooth and continuous dimming with a Magnetic Low Voltage dimmer (MLV).
- Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details).
Manufacturer Resources:
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Wall Wash
- Dimmable:
- On-Board Only
- Lumens:
- 1150
- Number of Bulbs:
- 1
- Product Type:
- Wall Wash
- Shade/Glass Description:
- Clear Glass Lens
- Warranty:
- 10 Years Functional, Lifetime Warranty on Finish
- Product Group:
- Outdoor Lighting
- Product Subgroup:
- Wall Lights
- Hardwired or Portable:
- Hardwired
- Avg Rated Hours:
- 70000
- Base Material:
- Brass
- Location Rating:
- Wet
- Brand Family:
- WAC Landscape
- Energy Star:
- No
- Wire Length:
- 36"
- Subcategory:
- Spot and Flood Lighting
- Certification:
- UL, cUL, IP66
- Glass Finish:
- Clear Glass Lens
- Location Indoor/ Outdoor:
- Outdoor
- Reversible Mounting:
- No
- Shade Material:
- Glass
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Segment:
- Lighting
- Product Voltage:
- 12V
- Product Length:
- 4.38"
- Light Temperature:
- 2700K
- Product Style:
- Contemporary
- Product Height:
- 6.13"
- Product Category:
- Landscape Lighting
- Product Width:
- 3.75"
- Product Wattage:
- 8W
WAC Lighting WAC-5021 – Frequently Asked Questions
1) Does the WAC 5021 wall wash come with a transformer, or do I need one?
The 5021 is a 12V fixture and needs a separate power supply. A magnetic or electronic low-voltage transformer is required and is sold separately. Input range on the fixture is 9-15V AC, so it tolerates some voltage drop down the run.
2) What is included in the box with the WAC 5021 mini wall wash?
You get the fixture with its integrated LED (no bulb to buy), a 9 inch mounting spike, and a 3 foot lead wire with two gel filled direct burial wire nuts. Transformer is not included, and additional mounting or glare control accessories are sold separately.
3) Can I dim the WAC 5021 landscape wall wash from a wall dimmer?
Dimming on the 5021 is on-board only. A mechanical dial at the base of the fixture sets brightness, so each light is adjusted by hand at the fixture rather than from a wall control. The description also notes smooth continuous dimming with a magnetic low voltage (MLV) dimmer on the system side.
4) Which finish of the WAC 5021 should I use on a coastal property?
For coastal or marine sites, take the -BBR version, solid brass coated in bronze, which WAC recommends for corrosive environments. The black and bronze versions are cast k-alloy aluminum. All three come in either color temperature: 5021-27BBR, 5021-27BK, 5021-27BZ and the matching -30 numbers.
5) Is this WAC wall wash safe in sprinkler spray and standing weather?
It is factory sealed and water tight with an IP66 rating, which covers high pressure water jets, and it is rated for wet locations. Listings are UL and cUL under 1838 for low voltage landscape lighting.
6) Do I have to pick 2700K or 3000K when ordering the 5021?
Order by color temperature: 5021-27 variants are 2700K and 5021-30 variants are 3000K. The 5021 mini wall wash also carries a second mechanical dial at the base that toggles between 2700K and 3000K, so you can adjust in the field.
7) How much light does the 5021 mini wall wash put out and how wide is the beam?
Output is rated at 1150 lumens at 8W in the catalogued configuration, with an 80 degree beam angle and 85 CRI. Because brightness is dialed at the base, the fixture ranges 2-16W and roughly 190-980 lumens as you turn it down or up, so one SKU covers wash jobs that would otherwise need several lamp wattages.
8) Does the 12V version of this WAC wall wash need the M6000-STAKE power stake?
No. The 9 inch mounting spike ships with the 12V fixture. The M6000-STAKE power stake is only required on the 120V version of this family, which is a different order number.
9) Will the WAC 5021 meet California Title 24 on a residential landscape job?
Yes, the 5021 is listed as Title 24 compliant and ADA compliant. It is not Energy Star rated. LED life is rated at 70,000 hours.
10) Can the LED be replaced in the WAC 5021 wall wash later?
No. The light source is an integrated LED in a factory sealed, water tight housing with a clear glass lens, so there is no lamp to swap. That sealing is what holds the IP66 rating; service means replacing the fixture.
How fast can I get the WAC Lighting WAC-5021 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-5021 come with a warranty?
Absolutely. The WAC Lighting WAC-5021 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-5021?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-5021 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.