You may also like
WAC Lighting 6" Dot LED Round Flush Mount
Dot 6in LED Flush Mount
- Available in a 316 marine grade stainless steel (SS) or powder coated aluminum (BK) construction.
- Lightweight injection-molded acrylic diffuser for bright and even illumination.
- 120V AC LED Technology, no transformer or driver needed. 277V option is available by special order.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Dot
- Dimmable:
- ELV
- Hardwired or Portable:
- Hardwired
- Lumens:
- 791
- Product Type:
- Flush Mount
- Shade/Glass Description:
- UV Rated Clear Acrylic Diffuser
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Outdoor Lighting
- Product Subgroup:
- Flush/Semi Flush
- ADA Compliant:
- Yes
- Number of Bulbs:
- 1
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Standard
- Backplate Diameter:
- 6"
- Backplate Length:
- 6"
- Energy Star:
- Yes
- Title 20:
- Yes
- Subcategory:
- Outdoor Ceiling Lighting
- Certification:
- ETL, cETL, IP65
- Glass Finish:
- UV Rated Clear Acrylic Diffuser
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Shade Material:
- Acrylic
- Title 24 Compliant:
- Yes
- Bulb Type:
- Integrated LED
- Segment:
- Lighting
- Product Voltage:
- 120V
- Product Length:
- 6.25"
- Beam Spread Angle:
- Flood
- Light Temperature:
- 2700K
- Product Diameter:
- 6.25"
- Mounting Method:
- Ceiling/Wall
- Product Style:
- Contemporary
- Product Height:
- 2.5"
- Product Category:
- Ceiling Lighting
- Product Width:
- 6.25"
- Product Wattage:
- 15.55W
WAC Lighting WAC-FM-W57806 – Frequently Asked Questions
1) Can the WAC Dot 6 inch LED flush mount be used outdoors in a wet location like an open balcony ceiling?
Yes. The Dot 6 inch LED round flush mount is wet location rated and listed for indoor or outdoor use, with an IP65 rating alongside ETL and cETL certification. IP65 means it is sealed against dust and protected from water jets, so a soffit, open balcony ceiling, or exposed exterior wall is fine. For coastal or pool deck exposure, order the 316 marine grade stainless steel version rather than the powder coated aluminum.
2) Does the WAC Dot 6 inch flush mount need a separate LED driver or transformer?
No. The Dot 6 inch flush mount runs on 120V AC LED technology, so it wires straight to line voltage with no transformer or remote driver. It is a hardwired fixture with the integrated LED included, drawing 15.55W. A 277V version exists as a special order.
3) What dimmer works with the WAC Dot 6 inch LED flush mount?
It dims with an electronic low voltage (ELV) dimmer, and WAC calls out smooth continuous dimming on that control type. A standard incandescent/forward-phase dimmer is not the right match. If you are standardizing a building on one dimmer model, spec an ELV dimmer across the openings that use this fixture.
4) Will the WAC Dot 6 inch flush mount cover my existing junction box and how far does it project?
The backplate is 6 inches across, which covers a standard 4 inch octagon or round ceiling box. The fixture itself measures 6.25 inches in diameter and projects 2.5 inches from the surface, so it sits tight enough for a low soffit or a walkway ceiling.
5) Can the WAC Dot 6 inch round fixture be mounted on a wall, or is it ceiling only?
Either. It is rated for ceiling or wall mounting, so the same part number works as a soffit downlight and as a wall mounted entry or corridor light. That is useful when you want one fixture carried through an exterior stair, a ceiling run, and a wall location without changing SKUs.
6) How much light does the WAC 6 inch Dot LED put out, and is the beam narrow or wide?
Output is 791 lumens from a single integrated LED at 15.55W, with a flood distribution rather than a spot. Combined with the clear UV rated acrylic diffuser, it spreads light evenly for general area coverage on a porch, corridor, or entry rather than accenting a single object.
7) Stainless steel or black aluminum for the WAC Dot 6 inch, which should I spec?
The stainless version is 316 marine grade, the choice for salt air, coastal, and pool environments. The black version is powder coated aluminum over an aluminum base, fine for inland exterior and interior work and the usual pick when finishes need to disappear into a dark soffit. Both carry the same wet location and IP65 rating.
8) Can the LED be replaced in the WAC Dot 6 inch flush mount when it fails?
No. The light source is an integrated LED with no lamp base, so there is nothing to relamp. Rated life is 50,000 hours, and at end of life the fixture is replaced rather than serviced. Worth noting if you are buying for a facility that keeps lamp stock on the shelf.
How fast can I get the WAC Lighting WAC-FM-W57806 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-FM-W57806 come with a warranty?
Absolutely. The WAC Lighting WAC-FM-W57806 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-FM-W57806?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-FM-W57806 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.