You may also like
WAC Lighting 9" Dot LED Round Flush Mount
Dot 9in LED Flush Mount- Available in a 316 marine grade stainless steel (SS) or powder coated aluminum (BK) construction.
- Lightweight injection-molded acrylic diffuser for bright and even illumination.
- 120V AC LED Technology, no transformer or driver needed. 277V option is available by special order.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Yes
- Collection:
- Dot
- Dimmable:
- ELV
- Hardwired or Portable:
- Hardwired
- Lumens:
- 1542
- Product Type:
- Flush Mount
- Shade/Glass Description:
- UV Rated Clear Acrylic Diffuser
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Outdoor Lighting
- Product Subgroup:
- Flush/Semi Flush
- ADA Compliant:
- Yes
- Number of Bulbs:
- 1
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Standard
- Backplate Diameter:
- 6"
- Backplate Length:
- 6"
- Energy Star:
- Yes
- Title 20:
- Yes
- Subcategory:
- Outdoor Ceiling Lighting
- Certification:
- ETL, cETL, IP65
- Glass Finish:
- UV Rated Clear Acrylic Diffuser
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Shade Material:
- Acrylic
- Title 24 Compliant:
- Yes
- Bulb Type:
- Integrated LED
- Segment:
- Lighting
- Product Voltage:
- 120V
- Product Length:
- 8.88"
- Beam Spread Angle:
- Flood
- Light Temperature:
- 2700K
- Product Diameter:
- 8.88"
- Mounting Method:
- Ceiling/Wall
- Product Style:
- Contemporary
- Product Height:
- 2.5"
- Product Category:
- Ceiling Lighting
- Product Width:
- 8.88"
- Product Wattage:
- 18.5W
WAC Lighting WAC-FM-W57809 – Frequently Asked Questions
1) Can the WAC Dot 9 inch LED flush mount be used outdoors in a covered entry or an exposed soffit?
It is wet location rated, so exposed soffits, open patios, and uncovered ceilings are all fair game, not just covered entries. The housing is either 316 marine grade stainless steel or powder coated aluminum, and the fixture carries an IP65 rating along with ETL and cETL listings. It's rated for indoor or outdoor use, so you can carry the same fixture from an exterior soffit into a bathroom or laundry ceiling.
2) Do I need a transformer or LED driver to wire in the WAC Dot 9 inch flush mount?
No separate transformer or driver. It runs on 120V AC LED technology and wires straight to line voltage as a hardwired fixture. A 277V version exists by special order. The LED is integrated and included, so there is no lamp to buy.
3) Will the WAC Dot 9 inch round flush mount cover a standard 4 inch octagon junction box?
Yes. The backplate is 6 inches across, which fully covers a 4 inch octagon or round box, and the fixture body itself measures 8.88 inches in diameter with a 2.5 inch projection off the surface. It mounts to either a ceiling or a wall.
4) What dimmer works with the WAC Dot LED flush mount? My building is on standard TRIAC wall dimmers.
It needs an electronic low voltage (ELV) dimmer, not a standard incandescent TRIAC or forward-phase dimmer. Pair it with a reverse-phase ELV control and you get smooth continuous dimming. If your existing wall boxes are TRIAC, plan on swapping those controls out as part of the job.
5) Which finish should I spec for a coastal or poolside installation?
Go with the stainless steel version. That one is 316 marine grade stainless, which is what you want in salt air or near chlorine. The black option is powder coated aluminum, fine for inland exteriors and interiors. Stainless steel is offered in all three color temperatures: FM-W57809-27-SS, -30-SS, and -35-SS.
6) Does the WAC Dot flush mount meet California Title 24 and ADA requirements for a commercial corridor?
It is listed ADA compliant, Energy Star qualified, and both Title 20 and Title 24 compliant, which covers the usual California residential and commercial lighting requirements. At 2.5 inches deep it stays within the shallow projection ADA wants on wall mounted applications.
7) What color temperatures does the 9 inch Dot flush mount come in, and how do I order the right one?
Three: 2700K, 3000K, and 3500K, each available in black or stainless. The temperature is baked into the part number as the two digit code, so FM-W57809-30-BK is the 3000K black unit and FM-W57809-35-SS is the 3500K stainless. If you're standardizing a property, pick one code and repeat it, since the LED is integrated and cannot be re-lamped to a different temperature later.
8) Can the LED be replaced when it burns out, or is the whole Dot fixture disposable?
The LED is integrated, so there is no socket and no lamp to change. Rated average life is 50,000 hours, which is why it's built as a sealed unit for wet locations. For MRO planning, treat it as a fixture replacement rather than a re-lamp, and keep spares in the same part number so the color temperature stays consistent across the property.
9) Is the diffuser on the Dot flush mount going to yellow outdoors?
The lens is a UV rated clear acrylic diffuser, injection molded, so it is specified for sun exposure rather than a plain acrylic. It is lightweight, which matters on an overhead flush mount, and it spreads the light evenly instead of showing the LED as a hot spot.
How fast can I get the WAC Lighting WAC-FM-W57809 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting WAC-FM-W57809 come with a warranty?
Absolutely. The WAC Lighting WAC-FM-W57809 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting WAC-FM-W57809?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting WAC-FM-W57809 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.