WAC Lighting 24DC-60P-GE Basic...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$74.95
WAC Lighting 24DC-60P-GE Basics & Gemini 24VDC Plug-In Power Supply, 60W Class 2 Transformer

WAC Lighting 24DC-60P-GE Basics & Gemini 24VDC Plug-In Power Supply, 60W Class 2 Transformer

(No reviews yet) Write a Review

Model: PS-24DC-60P-GE
From the Basics & Gemini Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$74.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting 24DC-60P-GE Basics & Gemini 24VDC Plug-In Power Supply, 60W Class 2 Transformer

The WAC Lighting 24DC-60P-GE is a Class 2, UL & cUL Listed enclosed electronic transformer engineered to power WAC Lighting Basics & Gemini Tape Light systems. This plug-in power supply accepts a 120VAC input and delivers a 24VDC output with a 60W max load, plugging into any standard 120V receptacle for straightforward installation. Housed in a steel enclosure with an easy-remove cover, it is IP20 rated for damp locations and is CEC Title 24 & ADA compliant, making it a dependable low-voltage source for LED tape light circuits.

Key Features

  • Class 2 Safety Design: Intrinsically safer construction compartmentalizes the transformer so no greater than 5 amps of current can be drawn on each compartment.
  • Plug-In Power Supply: Fully enclosed 120V plug-in unit with soft start, short circuit, and overload protection built in.
  • Output Rating: 24VDC output with a 60W max load and a low 1W minimum load requirement to support low-load LED tape systems.
  • Dimmable: Enables smooth, continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer; dimmers should be installed on the primary side of the transformer.
  • Simple Wiring: Secondary low voltage wiring for Class 2 transformers does not require conduit-sheathed cable or clamp wiring techniques.
  • Lead Wire Included: Comes with a 72in low voltage cable and tape-to-power connector for quick connection to WAC Basics or Gemini tape; longer lead wires (T24-BS-EX2) are sold separately.
  • Durable Construction: Steel enclosure with a cover that is easy to remove for installation and service access.

Certifications & Compliance

  • UL & cUL #1598 Listed for Damp Locations
  • IP20 Rated
  • CEC Title 24 Compliant
  • ADA Compliant
  • Energy Star Qualified

Technical Specifications

  • ADA Compliant: Yes
  • Bulbs Included: No
  • Dimmable: ELV;TRIAC
  • Energy Star: Yes
  • Hardwired or Portable: Plugin
  • Safety Rating: UL, cUL, IP20
  • Warranty: 5 Years Functional, 2 Years Finish
  • Subcategory: 24V DC Remote
  • Voltage: 120
  • Material: Steel
  • Country of Origin: China
  • Total Wattage: 60
  • Style: Functional
  • Mounting: Ceiling/Wall;Any

Typical Applications

  • WAC Basics & Gemini LED Tape Light Installations
  • Under-Cabinet and Cove Lighting Circuits
  • Damp-Location Accent Lighting
  • Dimmable LED Tape Light Systems Using ELV or TRIAC Dimmers
  • Residential and Commercial Low-Voltage Lighting Retrofits

Why WAC Lighting?

WAC Lighting builds this power supply around Class 2 safety, a steel enclosure, and UL & cUL listing for damp-location use, giving installers a code-compliant, low-voltage source for Basics & Gemini tape light. Backed by a 5-year functional and 2-year finish warranty, it is designed to deliver reliable, dimmable performance for demanding LED tape light installations.

Product Specs

ADA Compliant:
Yes
Bulbs Included:
No
Collection:
Basics & Gemini
Dimmable:
ELV;TRIAC
Energy Star:
Yes
Hardwired or Portable:
Plugin
Product Type:
Power Supply
Safety Rating:
UL, cUL, IP20
Subcategory:
24V DC Remote
Product Voltage:
120
Product Material:
Steel
Location Rating:
Damp
Total Wattage:
60
Product Style:
Functional
Mounting Method:
Ceiling/Wall;Any

WAC Lighting PS-24DC-60P-GE – Frequently Asked Questions

1) How much WAC Basics or Gemini tape light can a 24DC-60P-GE power supply run?
The WAC 24DC-60P-GE puts out 24VDC with a 60W maximum load, so total your tape run's watts per foot times the run length and keep it under 60W. It also has a 1W minimum load, which matters on very short accent runs: below that the supply has nothing to regulate against. For longer runs, split the circuit across multiple supplies rather than overloading one.
2) Does the WAC 24DC-60P-GE need to be hardwired, or does it plug into a standard outlet?
It plugs in. The 24DC-60P-GE is a plug-in unit that accepts 120VAC from any standard receptacle, so no junction box or electrician hookup is needed on the line side. That makes it the easy choice for under-cabinet and cove retrofits where an existing outlet is nearby. If your install calls for a concealed, hardwired remote transformer instead, this is not the right version.
3) Can the 24DC-60P-GE transformer be installed in a bathroom or other damp area?
Damp locations, yes. The supply is UL and cUL Listed to #1598 for damp locations and carries an IP20 enclosure rating, which covers a vanity soffit, a covered porch ceiling, or a cove in a humid space. IP20 is not a wet-location rating, so it cannot sit where it will take direct water or spray.
4) What comes in the box with the WAC 24DC-60P-GE, and do I need to order anything else?
It ships with a 72 inch low voltage lead cable and a tape-to-power connector, so you can land it on WAC Basics or Gemini tape without sourcing a separate pigtail. If the transformer has to sit farther than six feet from the start of the tape run, order the T24-BS-EX2 extension lead separately. No lamps or tape light are included.
5) Does low voltage wiring from this Class 2 transformer need to be run in conduit?
No. Because the 24DC-60P-GE is a Class 2 transformer, the secondary low voltage wiring does not require conduit, sheathed cable, or clamp wiring techniques. The Class 2 construction compartmentalizes the transformer so no more than 5 amps can be drawn on each compartment. Line side 120V work still follows normal requirements.
6) Will this WAC power supply satisfy a Title 24 and ADA spec on a commercial job?
It is listed as CEC Title 24 compliant, ADA compliant, and Energy Star qualified, which covers the usual boxes on California and institutional lighting submittals for a 24V tape light driver. The spec sheet and installation guide are both published for the 24DC-60P-GE if your submittal package needs the manufacturer documents attached.
7) Can the 24DC-60P-GE be mounted on a wall or ceiling, or does it just sit loose?
The enclosure is steel with a cover that removes for install and service, and it is rated for ceiling, wall, or any orientation mounting. In practice that means you can fasten it inside a cabinet, above a ceiling access point, or in a cove rather than leaving it dangling from the receptacle. Keep it reachable, since the cover is where you get to the connections.
8) Is this WAC transformer protected against a shorted or overloaded tape light run?
Built-in soft start, short circuit, and overload protection are part of the 24DC-60P-GE. On a tape light circuit where someone may cut or splice tape in the field, that protection is the difference between a nuisance shutdown and a damaged driver. It is still a 60W ceiling, so the protection is not a substitute for sizing the run correctly.
How fast can I get the WAC Lighting PS-24DC-60P-GE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting PS-24DC-60P-GE come with a warranty?
Absolutely. The WAC Lighting PS-24DC-60P-GE is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting PS-24DC-60P-GE?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting PS-24DC-60P-GE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!