WAC Lighting Charge LED Track Head 10W 3000K CRI 90
- Delivered Lumens: 850lm
- CBCP: 1196
- 3000K
- CRI: 90
- Power: 11W
- Input: 120 VAC, 50/60Hz
- ELV Dimming: 100-5%
- TRIAC Dimming: 100-5%
- Rated Life: 50000 Hours
- Construction: Die-cast aluminum with frosted TIR lens
- 350�� horizontal and 90�� vertical aiming
- Driver concealed within the fixture
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Bulb Base:
- Driver
- Bulb Shape:
- LED Module
- Bulbs Included:
- Yes
- Collection:
- Charge
- Dimmable:
- ELV, TRIAC
- Hardwired or Portable:
- Plugin
- Lumens:
- 1050
- Number of Bulbs:
- 1
- Product Type:
- Line Voltage Heads
- Shade/Glass Description:
- Clear Glass Lens
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Track Lights
- Avg Rated Hours:
- 50000
- Base Material:
- Aluminum
- Location Rating:
- Dry
- Brand Family:
- WAC Limited
- CEC Listed:
- Yes
- CRI:
- 90
- Energy Star:
- Yes
- Subcategory:
- J Track Fixture
- Certification:
- ETL, cETL
- Glass Finish:
- Clear Glass Lens
- Location Indoor/ Outdoor:
- Indoor
- Shade Material:
- Glass
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Segment:
- Lighting
- Product Voltage:
- 120V
- Product Length:
- 3"
- Light Temperature:
- 3000K
- Product Style:
- Functional
- Product Height:
- 5.88"
- Product Category:
- Track Lighting
- Product Width:
- 2.38"
- Product Wattage:
- 11W
WAC Lighting J-8010-30-BK – Frequently Asked Questions
1) Will the WAC Charge 8010 track head fit standard J-type track?
Yes. The Charge 8010 head is built for J track (also called H/J-style three-circuit track in some lines) and is catalogued as a J track fixture running on 120V line voltage. It is a line voltage head, so no remote transformer is needed, and the LED driver sits inside the fixture body rather than on the track.
2) Can I dim these LED track heads on my existing wall dimmer?
The Charge 8010 dims on ELV or TRIAC controls, 100 percent down to 5 percent on either. TRIAC means a standard forward-phase incandescent-style dimmer will work; ELV means a reverse-phase electronic low voltage dimmer will too. It will not dim correctly on a 0-10V or DALI control.
3) Does the WAC Charge 8010 track head meet California Title 24?
Yes, it is Title 24 compliant and CEC listed, which is what a California permit inspection looks for. It is also Energy Star rated and ETL and cETL certified, so it clears both US and Canadian listing requirements for a commercial fit-out.
4) Can I use these heads on a covered exterior walkway or in a bathroom?
No. The Charge 8010 is rated for dry locations and indoor use only, so keep it out of covered patios, open soffits, shower zones, and anywhere exposed to moisture. For those areas you need a wet or damp listed fixture.
5) Is 3000K at 90 CRI the right pick for retail or gallery display lighting?
For merchandise, artwork, and millwork, yes. 3000K is warm white, so wood, skin tones, and warm finishes read naturally, and a CRI of 90 keeps color separation accurate on fabric and print. If your space is already lit at 3500K or 4000K, pick a matching color temperature instead so the accent heads don't read yellow next to the ambient layer.
6) How much space does this track head take up below the ceiling?
The Charge 8010 body measures 5.88 inches high, 3 inches long, and 2.38 inches wide. That's the drop to plan for in a low-ceiling retail bay or under a soffit, and it's measured from the track, so add your track's own profile height.
7) Do I need to buy lamps separately for the WAC Charge 8010?
No lamp to order. It is a one-piece LED module with the driver built into the head, so the light source is included and there is no socket or bulb base to match. Rated life is 50,000 hours, and when the module reaches end of life the head is replaced rather than relamped.
8) What is the actual power draw per head so I can size the track circuit?
Each Charge 8010 head draws 11W at 120 VAC, 50/60Hz. Divide your track circuit's rated capacity by 11W to get the maximum head count per run, and leave margin if you are mixing in higher-wattage heads on the same circuit.
9) What is the Charge 8010 head made of, and will it hold up in a high-traffic retail space?
Die-cast aluminum housing with a frosted TIR lens. Cast aluminum both stiffens the head so repeated re-aiming doesn't loosen it and acts as the heat sink for the LED, which is what the 50,000 hour rating depends on. The TIR optic controls the beam rather than relying on a reflector.
How fast can I get the WAC Lighting J-8010-30-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting J-8010-30-BK come with a warranty?
Absolutely. The WAC Lighting J-8010-30-BK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting J-8010-30-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting J-8010-30-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.