You may also like
WAC Lighting 7.4" Disc LED Energy Star Flush Mount with Motion Sensor
Model: WAC-FM-306MS-930JB-WT
WAC Lighting 7.4" Disc LED Energy Star Flush Mount with Motion SensorI Can't Believe it's Not Recessed imitates a traditional 6in recessed downlight without the need for installing a housing...
WAC Lighting
$40.71
WAC Lighting 9.5" Endurance Louvered LED Brick Light
Model: WAC-WL-5205
WAC Lighting 9.5" Endurance Louvered LED Brick LightDesigned for integration into brick walls or vertical risers. The energy efficient Endurance Louvered LED Brick Light features a die-cast aluminum...
WAC Lighting
Starting at
$254.95
WAC Lighting MS-120 Endurance Motion Sensor
The WAC Lighting MS-120 is a 120V passive infrared (PIR) motion sensor accessory for the Endurance outdoor wall pack family. Hardwired, die-cast aluminum construction, IP66-rated and ETL/cETL Listed for wet locations. Compatible with any Endurance Fin, Hawk, or Flood/Security fixture.
Key Features
- Compatible with Endurance Fin, Hawk, and Flood/Security wall packs
- Detects motion and automatically switches fixtures on and off
- Two adjustable controls: detection sensitivity and run-time duration after trigger
- 120V hardwired; die-cast aluminum housing
- IP66-rated factory-sealed for wet locations
- ADA Compliant; Dark Sky approved; Title 24 Compliant
- Energy Star rated; ETL and cETL Listed
- Includes extension rod and L-connector; installation instructions included in packaging
Specifications
- Voltage: 120V
- Location Rating: Wet (IP66)
- Housing: Die-Cast Aluminum
- Certifications: ETL, cETL, IP66
- Dimmable: ELV, TRIAC
- Dimensions: 11.75" H x 11.75" L x 3.5" W
- Warranty: 5 Years Functional, 2 Years Finish
Manufacturer Resources
Manufacturer Resources
Product Specs
- ADA Compliant:
- Yes
- Collection:
- Endurance
- Dimmable:
- ELV, TRIAC
- Hardwired or Portable:
- Hardwired
- Product Type:
- Occupancy Sensor
- Warranty:
- 5 Years Functional, 2 Years Finish
- Product Group:
- Wiring Devices
- Product Subgroup:
- Lighting Controls & Sensors
- Base Material:
- Die Cast Aluminum
- Location Rating:
- Wet
- Brand Family:
- WAC Limited
- CEC Listed:
- Yes
- Dark Sky:
- Yes
- Energy Star:
- Yes
- Subcategory:
- Outdoor Accessories
- Certification:
- ETL, cETL, IP66
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Segment:
- Lighting
- Product Voltage:
- 120V
- Product Length:
- 11.75"
- Product Style:
- Contemporary
- Product Height:
- 11.75"
- Product Category:
- Wall Lighting
- Product Width:
- 3.5"
- Department:
- Electrical
WAC Lighting MS-120-BK – Frequently Asked Questions
1) Will the WAC Endurance MS-120 motion sensor work with any WAC wall pack, or only certain Endurance fixtures?
The MS-120 is an add-on sensor for the Endurance collection, and it mounts to any Endurance Fin, Hawk, or Flood/Security Light. It is not a universal sensor for other lines. If the fixture on the wall is not an Endurance model, this is the wrong accessory.
2) Can the MS-120 sensor be mounted outdoors in the rain?
Wet location rated, indoor or outdoor. The sensor is ETL and cETL Listed with an IP66 rating, so driving rain and washdown on an exterior wall are within what it is built for. Housing is die cast aluminum.
3) What voltage does the WAC MS-120 motion sensor run on, and does it need to be hardwired?
120V, hardwired. There is no plug and no battery option, so an electrician ties it into the fixture's line voltage feed at the wall box. On a multi-family or campus retrofit where the existing wall packs are fed at 277V, this sensor is not the right part.
4) Does the WAC Endurance MS-120 sensor meet Title 24 and Dark Sky requirements for a California job?
Title 24 compliant, CEC listed, Energy Star, and Dark Sky, and it carries an ADA compliant designation. On a California exterior lighting spec where occupancy-based shutoff is required, adding this sensor to an Endurance fixture is how that control requirement gets met.
5) How much wall space do I need to allow for the Endurance MS-120 sensor next to the fixture?
Allow for a part measuring 11.75 x 11.75 x 3.5 inches. That is the footprint to check against any conduit, downspout, or trim that sits beside the wall pack before you set the mounting point.
6) Do I need to buy a mounting arm or bracket separately for the WAC Endurance motion sensor?
No extra hardware to source. An extension rod and an L connector ship in the box along with the installation instructions, which is what lets you offset the sensor from the fixture and aim it at the approach path.
7) Can I adjust how long the light stays on after the WAC MS-120 sensor is triggered?
Two adjustable controls on the sensor: one sets sensitivity to time of day, the other sets how long the light runs after motion trips it. For a property manager running a parking area or a back entry, that is the pair of settings that stops the fixture burning all night or cutting out while someone is still walking.
8) What finishes does the WAC MS-120 motion sensor come in so it matches my existing wall packs?
Four finishes, ordered by suffix: Black (MS-120-BK), Bronze (MS-120-BZ), Graphite (MS-120-GY), and White (MS-120-WT). Match the suffix to the Endurance fixture already on the building so the sensor reads as part of the same assembly rather than an add-on.
9) Is the MS-120 a dimmer or just an on/off occupancy sensor?
It switches the fixture on and off on motion, it is not a dimming control. Endurance fixtures themselves are dimmable on ELV and TRIAC controls, so if you want level control as well as occupancy switching, the dimmer is a separate device in the circuit.
How fast can I get the WAC Lighting MS-120-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting MS-120-BK come with a warranty?
Absolutely. The WAC Lighting MS-120-BK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting MS-120-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting MS-120-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.