WAC Lighting Pop-In 4" Square ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$58.00
$51.95
WAC Lighting Pop-In 4″ Square 5CCT New Construction Downlight

WAC Lighting Pop-In 4" Square 5CCT New Construction Downlight

(No reviews yet) Write a Review

Model: R4DSDN-F9CS-BK
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$58.00
$51.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pop-In - Square 5CCT New Construction Downlight

Features

  • Delivered Lumens: 1000lm
  • CBCP: 1256
  • 2700K/3000K/3500K/4000K/5000K
  • CRI: 90
  • Power: 12W
  • Input: 120-277 VAC, 50/60Hz
  • IC Rated, Airtight
  • ELV Dimming: 100-5%
  • TRIAC Dimming: 100-5%
  • Rated Life: 50000 Hours
  • Construction: Die-cast Aluminum with 20-gauge Cold Rolled Steel Junction Box
  • 5-CCT Switchable between 2700K and 5000K
  • Electrical box located on back of fixture to allow easy installation
  • Sold as new construction, may be configured in field for remodel
  • Driver concealed within the fixture

Manufacturer Resources:

Specification Sheet

Installation Guide

Manufacturer Resources

Product Specs

Product Group:
Indoor Lighting
Brand Family:
WAC Limited
Subcategory:
Ceiling Lighting
Segment:
Lighting

WAC Lighting R4DSDN-F9CS-BK – Frequently Asked Questions

1) Can the WAC Pop-In 4 inch square downlight be used in a remodel ceiling, or is it new construction only?
It ships as a new construction fixture but can be configured in the field for remodel work. The junction box sits on the back of the housing, so you are not running conduit to a separate box in the ceiling cavity, and the driver is concealed inside the fixture rather than hanging loose above the plane.
2) Can this WAC Pop-In downlight sit in direct contact with attic insulation?
Yes. The Pop-In 4 inch square downlight is IC Rated and airtight, so it can be buried in insulation and it will not leak conditioned air through the ceiling plane.
3) How do I set the color temperature on the WAC Pop-In 5CCT downlight?
There is a field switch on the fixture that selects 2700K, 3000K, 3500K, 4000K or 5000K. You order one part number and set the temperature at install, which is why it works well for a property manager standardizing across a building with mixed spaces, warmer in units, cooler in back-of-house.
4) Will this WAC downlight run on a 277V commercial circuit?
Yes. Input is 120-277 VAC, 50/60Hz, so the same fixture works on residential 120V and on 277V lighting branch circuits in commercial buildings.
5) What dimmers work with the WAC Pop-In 4 inch square downlight?
It dims on both ELV and TRIAC controls, 100 percent down to 5 percent on either. Note the 120-277V input: TRIAC and ELV dimming are line voltage control methods, so match the dimmer to the circuit voltage you are actually feeding it.
6) Is 1000 lumens enough for general ceiling lighting, and how many watts does it draw?
The Pop-In square delivers 1000 lumens at 12W, with a center beam candlepower of 1256 and 90 CRI. That output suits general ambient coverage in residential and light commercial ceilings on typical 4 foot spacing; for high ceilings or task-critical areas you want a higher lumen fixture or tighter spacing.
7) Is the WAC Pop-In square downlight available in black, and does it come in multi-packs?
Finish choices are black or white. White is also sold in a 2-pack and a 6-pack for volume jobs; black is single. The black MPN is R4DSDN-F9CS-BK and single white is R4DSDN-F9CS-WT.
8) What is the Pop-In downlight made of, and will it hold up in a rental or hospitality install?
The trim and body are die-cast aluminum with a 20-gauge cold rolled steel junction box, and the LED is rated for 50,000 hours. That is a sealed, non-relamp fixture, so maintenance is replacement rather than bulb changes.
9) Should I pick the square Pop-In or a round 4 inch downlight?
Purely an aperture aesthetic decision. The square cut Pop-In lines up with square ceiling grids, cabinetry and trim details and is often specified when the rest of the ceiling devices are square. Round reads softer and is the default in most residential work. Both go in the same 4 inch class of opening, so pick on appearance and keep the run consistent, mixing shapes in one ceiling looks like a mistake.
How fast can I get the WAC Lighting R4DSDN-F9CS-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting R4DSDN-F9CS-BK come with a warranty?
Absolutely. The WAC Lighting R4DSDN-F9CS-BK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting R4DSDN-F9CS-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting R4DSDN-F9CS-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!