Metallics JSPMP38SS 10-32 x 2-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JSPMP38SS 10-32 x 2-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP38SS 10-32 x 2-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP38SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 2-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Pan head with Phillips Drive
    • 18-8 Stainless Material
    • 10-32 Diameter, 2-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.9 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP38SS – Frequently Asked Questions

1) Will a 10-32 machine screw thread into standard electrical box and device ears?
Yes. The Metallics JSPMP38SS is a 10-32 thread, 32 threads per inch, which is the thread size used for device mounting holes in outlet boxes, switch boxes, and plaster rings. At 2-1/2 inches long it is the length you reach for when the device has to stand off a deep mud ring or a stack of extension rings rather than sit flush.
2) Can I use these on a federally funded job with Buy American requirements?
No. The JSPMP38SS is listed as not Buy American compliant and not ARRA compliant, with multiple countries of origin. For a project with domestic sourcing requirements in the contract, you need a fastener certified as domestically produced.
3) What driver do I need for these Phillips pan head screws?
A #2 Phillips bit. The recess is a Phillips drive with a 0.192 inch recess diameter and a gaging depth of 0.089 to 0.113 inch, so a #2 seats fully. A #1 will cam out and a #3 will not bottom in the recess.
4) Can I use 18-8 stainless machine screws outdoors or in a damp location?
18-8 stainless is the usual choice for exterior and wet-location work where plated steel would rust out, and that is the material these pan head screws are made from. For coastal or chloride-heavy exposure, 316 is the step up from 18-8.
5) What dimensional standard do these Metallics machine screws meet?
They are built to ASME B18.6.3-2010, the standard for inch-series machine screws, with material to SAE. That is what lets you specify them against a drawing that calls out B18.6.3 head and recess dimensions rather than just a size.
6) How are these sold, and what is the minimum I can buy?
They ship in a jar of 100, and 100 is the order minimum. Shipping weight for the jar is 1.9 lbs. Other sizes and quantities are available by request.
7) Will a machine screw like this hold in drywall or wood on its own?
No. A machine screw has a uniform straight thread and no point, so it needs a tapped hole, a threaded device ear, or a nut on the back side. For fastening into wood, drywall, or sheet metal without pre-tapped threads, you want a wood screw, self-drilling sheet metal screw, or an anchor instead.
8) What tensile strength can I count on from these stainless screws?
80,000 psi minimum, with hardness reported as Rockwell BBS-B9S. Metallics notes that tensile values for stainless machine screws are approximations, since there is no single performance standard for them. If a drawing calls out a graded strength value, a graded steel fastener is the correct specification rather than stainless.
How fast can I get the Metallics JSPMP38SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP38SS come with a warranty?
Absolutely. The Metallics JSPMP38SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP38SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP38SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!