Metallics JSPMP37SS 10-32 x 2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JSPMP37SS 10-32 x 2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP37SS 10-32 x 2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP37SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 18-8 Stainless Material
    • 10-32 Diameter, 2" Length
    • Pan head with Phillips Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
2
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.6 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP37SS – Frequently Asked Questions

1) Are these stainless screws OK for outdoor or damp-location work?
The JSPMP37SS is 18-8 stainless, so it holds up in wet and outdoor locations and in washdown or coastal-adjacent interiors far better than a plated steel screw. 18-8 is the common austenitic grade used where corrosion, not maximum strength, is the deciding factor.
2) Do these machine screws meet a dimensional spec I can submit on a job?
They are built to ASME B18.6.3-2010, the dimensional standard for inch-series machine screws, with SAE as the material standard. Both Buy American and ARRA compliance are flagged, which matters on federal and federally funded work. Country of origin is listed as multiple.
3) What size Phillips bit do I need for these Metallics pan head screws?
A #2 Phillips. The recess is sized at 0.192 inch diameter with a gaging depth of 0.089 to 0.113 inch, which is the standard #2 recess for a 10-32 pan head. Using a #1 will cam out and a #3 will not seat.
4) How many screws come in a pack, and can I buy just a few?
These ship in a jar of 100 with a 100-count order minimum, so it is a bulk pack rather than a loose count. For an MRO crib or a van stock that is the point; if you only need a handful for one device, you are still buying the jar.
5) Will the pan head sit flat against a cover plate without fouling the opening?
Pan head, with a head width of 0.357 to 0.373 inch and a head height of 0.122 to 0.133 inch. It bears flat on the surface and does not countersink, so plan on the head standing proud by about an eighth of an inch. If you need the head flush with the finished surface, you want a flat head screw instead, not this one.
6) How strong is a stainless 10-32 screw compared to a plated steel one?
Tensile strength is listed at 80,000 psi minimum with a hardness of Rockwell BBS-B9S. Metallics notes that tensile figures for stainless screws are approximations, since there is no single performance standard for stainless machine screws. If your application is structurally loaded rather than corrosion-driven, a hardened plated steel screw is the better choice; stainless is here for the environment.
7) Is the JSPMP37SS a fully threaded screw or does it have an unthreaded shank?
It is a 10-32 UNF machine screw, which is a uniform-diameter, fully formed thread intended to turn into a tapped hole or a nut rather than cut its own thread in wood or sheet metal. If you need something that forms its own thread in unthreaded metal, a self-tapping or sheet metal screw is the right part, not this.
How fast can I get the Metallics JSPMP37SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP37SS come with a warranty?
Absolutely. The Metallics JSPMP37SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP37SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP37SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!