You may also like
ACSI K-103 Request To Exit Switch Kit for Sargent 80 Series Series
Model: ACSI-K-103
ACSI K-103 REQUEST TO EXIT SWITCH KIT FOR SARGENT 80 SERIES SERIES OVERVIEWK-103 Request To Exit Switch Kit for Sargent 80 Series Series. ACSI Series K Switch Kits are field installed in exit devices...
ACSI
$88.00
$72.69
ACSI K-124 Request To Exit Switch Kit for Precision 2000 Series Series
Model: ACSI-K-124
ACSI K-124 REQUEST TO EXIT SWITCH KIT FOR PRECISION 2000 SERIES SERIES OVERVIEWK-124 Request To Exit Switch Kit for Precision 2000 Series Series. ACSI Series K Switch Kits are field installed in exit...
ACSI
$88.00
$84.53
ACSI K-110 REQUEST TO EXIT SWITCH KIT FOR MONARCH 18, 19 SERIES OVERVIEW
- K-110 Request To Exit Switch Kit for Monarch 18, 19 Series. ACSI Series K Switch Kits are field installed in exit devices. Series K Switch Kits include a SPDT (Single Pole Double Throw) switch assembly with long wire leads and easy-to-follow installation instructions. K Switch Kits may be used to:
- Provide instant release of magnetic locks for free egress.
- Activate a door alarm.
- Signal a control console when the push bar of an exit device is depressed.
- Shunt a door alarm to allow free egress.
- Buy the ACSI K-110 Switch Kit for Monarch 18, 19 Series for easy installation and dependable door hardware solution.
ACSI ELECTRIC EXIT DEVICE SWITCH KITS COLLECTION
- ACSI K-100 Request To Exit Switch Kit for Von Duprin 33A, 35A, 98, 99 Series
ACSI K-200 Request To Exit Switch Kit for Von Duprin 33A, 35A, 98, 99 DPDT Series
ACSI K-101 Request To Exit Switch Kit for Von Duprin 55 Series
ACSI K-102 Request To Exit Switch Kit for Von Duprin 88 Series
ACSI K-103 Request To Exit Switch Kit for Sargent 80 Series Series
ACSI K-203 Request To Exit Switch Kit for Sargent 80 Series DPDT Series
ACSI K-104 Request To Exit Switch Kit for Sargent 9600, 9700, 9800, 9900 Series
ACSI K-105 Request To Exit Switch Kit for Sargent 9300, 9400, 9500 Series
ACSI K-106 Request To Exit Switch Kit for Adams Rite 8000, 3000 Series
ACSI K-107 Request To Exit Switch Kit for Corbin Russwin 8000 and Yale 2100 Series
ACSI K-108 Request To Exit Switch Kit for Jackson 1085, 1095 Series
ACSI K-109 Request To Exit Switch Kit for Yale 7000 and Corbin Russwin ED4000, ED5000 Series
ACSI K-110 Request To Exit Switch Kit for Monarch 18, 19 Series
ACSI K-111 Request To Exit Switch Kit for Doromatic 990, 1090 Series
ACSI K-112 Request To Exit Switch Kit for Doromatic 1490, 1590 Series
ACSI K-124 Request To Exit Switch Kit for Precision 2000 Series Series
ACSI K-125 Request To Exit Switch Kit for Dorma 9000 Series
ACSI K-126 Request To Exit Switch Kit for Hager 4500, 4600 and PDQ 6200 and Stanley Commercial QED100, 200, 300 Series
ACSI K-226 Request To Exit Switch Kit for Hager 4500, 4600 and PDQ 6200 and Stanley Commercial QED100, 200, 300 DPDT Series
ACSI K-128 Request To Exit Switch Kit for Design 1000 Series
ACSI K-129 Request To Exit Switch Kit for Falcon 24, 25 Series
ACSI K-130 Request To Exit Switch Kit for Jackson 20 Series
ACSI K-131 Request To Exit Switch Kit for Falcon 1690, 1790 Series
ACSI K-123 Latch Bolt Monitor Switch Kit for Von Duprin 33A, 35A, 98, 99 Series
ACSI K-127 Latch Bolt Monitor Switch for ACSI 1500K-VD ELR Kit on Von Duprin 33A, 35A. 98, 99 Series
Manufacturer Resources
ACSI K-110 Request To Exit Switch Kit for Monarch 18, 19 Series Catalog
Product Specs
- Subcategory:
- Electric Exit Device Switch Kits
- Series:
- 1500 Series
- Collection:
- 1500 Series
- Product Type:
- Exit Device Field Install Kits
- Compatibility:
- Monarch 18, 19 Series
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Lock Function:
- Part/Component
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Function:
- Part/Component
- Fire Rating:
- No
- Product Category:
- Electronic Access Control
- Department:
- Door Hardware
ACSI K-110 – Frequently Asked Questions
1) Will the ACSI K-110 switch kit fit a Monarch 18 or 19 series exit device?
That's exactly what the K-110 is cut for. It's a field-installed request-to-exit switch kit built specifically for Monarch 18 and 19 Series exit devices. ACSI builds a separate kit per device family rather than one universal part, so if the door has a Von Duprin, Sargent, Falcon or Precision device on it instead, the K-110 is the wrong number and you want the matching kit for that brand.
2) What does an ACSI request-to-exit switch kit actually do once it's in the exit device?
It signals that someone pushed the bar. The K-110 puts an SPDT switch assembly inside the Monarch 18 or 19 device, and depressing the push bar throws that switch. Four common uses: instant release of a magnetic lock for free egress, triggering a door alarm, shunting a door alarm so egress doesn't cause a nuisance trip, and signalling a control console that the door was used. The kit ships with long wire leads and installation instructions.
3) Is the K-110 a single-pole or double-pole switch, and what if I need two separate circuits?
Single pole, double throw. One SPDT switch means one common with a normally open and a normally closed contact, which covers a single function: release the mag lock, or shunt the alarm, or report to the console. If the job needs two independent circuits switched off the same push bar, ACSI's DPDT kits exist in the Series K line for other device families, such as the K-200 for Von Duprin 33A, 35A, 98 and 99, the K-203 for Sargent 80, and the K-226 for Hager 4500 and 4600, PDQ 6200 and Stanley Commercial QED100, 200 and 300. The Monarch kit is the SPDT K-110.
4) Do I have to replace my exit devices to add request-to-exit, or can I retrofit the ones already on the doors?
Retrofit. Series K kits are field installed into the exit device you already have, so a building running Monarch 18 or 19 devices gets request-to-exit signalling without buying new hardware for every opening. That's usually the deciding difference between this and ordering electrified exit devices: the switch goes in the existing chassis and you run the leads out to the access control or alarm panel.
5) I'm standardizing request-to-exit across a building with mixed exit device brands. Can I use one ACSI kit everywhere?
No, and that's the thing to plan around. ACSI matches the kit to the device, so a mixed building takes a mixed order: K-110 for Monarch 18 and 19, K-100 for Von Duprin 33A, 35A, 98 and 99, K-101 for Von Duprin 55, K-102 for Von Duprin 88, K-103 for Sargent 80, K-104 for Sargent 9600, 9700, 9800 and 9900, K-105 for Sargent 9300, 9400 and 9500, K-106 for Adams Rite 8000 and 3000, K-107 for Corbin Russwin 8000 and Yale 2100, K-108 for Jackson 1085 and 1095, K-109 for Yale 7000 and Corbin Russwin ED4000 and ED5000, K-124 for Precision 2000, K-125 for Dorma 9000, K-129 for Falcon 24 and 25, and K-131 for Falcon 1690 and 1790. Walk the openings and count devices by series before you order.
6) Is the ACSI K-110 fire rated for use on a fire-rated exit device?
The K-110 switch kit itself carries no fire rating. It's a switch assembly component, not a labeled door assembly part, so any fire-door decision rests on the Monarch device and door assembly it goes into rather than on the kit.
7) What's the difference between an ACSI request-to-exit kit and a latch bolt monitor kit?
Different event. A request-to-exit kit like the K-110 switches when the push bar is depressed, so it tells the system somebody is leaving and releases a mag lock or shunts an alarm. A latch bolt monitor watches the latch itself to confirm the door actually secured. ACSI builds those separately: the K-123 latch bolt monitor kit for Von Duprin 33A, 35A, 98 and 99, and the K-127 latch bolt monitor for the ACSI 1500K-VD ELR kit on those same Von Duprin devices. If you need both signals on a Monarch opening, the K-110 covers the RX side only.
8) Do I need to order anything else with the K-110 to wire up a mag lock release?
The kit itself is complete for the device side: SPDT switch assembly, long wire leads, and installation instructions. What it does not include is anything downstream, so the mag lock, the power supply, the access control or alarm panel and the wire run between them are separate. The leads are long enough to get out of the device; you make up the connection to your panel.
9) Is the ACSI K-110 rated for commercial door traffic, or is it a light-duty part?
Commercial. The K-110 is a commercial-grade electronic access control component from ACSI's 1500 Series, sold for exit devices in the field, which is a hardware class you find on institutional and commercial egress doors rather than residential ones.
10) Only one version of the ACSI K-110 exists, or do I have to specify an option when ordering?
One part number, nothing to specify. The K-110 is ordered as a single model, with no finish, handing or voltage options to pick. Handing doesn't come into it either, since the switch mounts inside the exit device chassis.
How fast can I get the ACSI K-110 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI K-110 come with a warranty?
Absolutely. The ACSI K-110 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI K-110?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ACSI K-110 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.