ACSI K-128 Request To Exit Swi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$88.00
$56.19
ACSI ACSI K-128 Request To Exit Switch Kit for Design 1000 Series ACSI-K-128

ACSI K-128 Request To Exit Switch Kit for Design 1000 Series

(No reviews yet) Write a Review

Model: K-128
From the 1500 Series Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$88.00
$56.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ACSI K-128 REQUEST TO EXIT SWITCH KIT FOR DESIGN 1000 SERIES OVERVIEW

  • K-128 Request To Exit Switch Kit for Design 1000 Series. ACSI Series K Switch Kits are field installed in exit devices. Series K Switch Kits include a SPDT (Single Pole Double Throw) switch assembly with long wire leads and easy-to-follow installation instructions. K Switch Kits may be used to:
  • Provide instant release of magnetic locks for free egress.
  • Activate a door alarm.
  • Signal a control console when the push bar of an exit device is depressed.
  • Shunt a door alarm to allow free egress.
  • Buy the ACSI K-128 Switch Kit for Design 1000 Series for easy installation and dependable door hardware solution.

ACSI K-128 REQUEST TO EXIT SWITCH KIT FOR DESIGN 1000 SERIES PRODUCT FEATURES

  • Function: Part/Component
  • Product Type: Electronic Part/Accessory
  • Contact Ratings: 3A @ 125VAC; 2A @ 30VDC
  • Function Family: Part/Component
  • Features: Switch Monitors Egress by Activation of Actuating Bar of Exit Device
  • For Use With: Design Hardware 1000 Series Exit Devices
  • Manufacturer Parent: ACSI
  • Sub-Series: K-128

ACSI ELECTRIC EXIT DEVICE SWITCH KITS COLLECTION

  • ACSI ACSI K-100 Request To Exit Switch Kit for Von Duprin 33A, 35A, 98, 99 Series
    ACSI K-200 Request To Exit Switch Kit for Von Duprin 33A, 35A, 98, 99 DPDT Series
    ACSI K-101 Request To Exit Switch Kit for Von Duprin 55 Series
    ACSI K-102 Request To Exit Switch Kit for Von Duprin 88 Series
    ACSI K-103 Request To Exit Switch Kit for Sargent 80 Series Series
    ACSI K-203 Request To Exit Switch Kit for Sargent 80 Series DPDT Series
    ACSI K-104 Request To Exit Switch Kit for Sargent 9600, 9700, 9800, 9900 Series
    ACSI K-105 Request To Exit Switch Kit for Sargent 9300, 9400, 9500 Series
    ACSI K-106 Request To Exit Switch Kit for Adams Rite 8000, 3000 Series
    ACSI K-107 Request To Exit Switch Kit for Corbin Russwin 8000 and Yale 2100 Series
    ACSI K-108 Request To Exit Switch Kit for Jackson 1085, 1095 Series
    ACSI K-109 Request To Exit Switch Kit for Yale 7000 and Corbin Russwin ED4000, ED5000 Series
    ACSI K-110 Request To Exit Switch Kit for Monarch 18, 19 Series
    ACSI K-111 Request To Exit Switch Kit for Doromatic 990, 1090 Series
    ACSI K-112 Request To Exit Switch Kit for Doromatic 1490, 1590 Series
    ACSI K-124 Request To Exit Switch Kit for Precision 2000 Series Series
    ACSI K-125 Request To Exit Switch Kit for Dorma 9000 Series
    ACSI K-126 Request To Exit Switch Kit for Hager 4500, 4600 and PDQ 6200 and Stanley Commercial QED100, 200, 300 Series
    ACSI K-226 Request To Exit Switch Kit for Hager 4500, 4600 and PDQ 6200 and Stanley Commercial QED100, 200, 300 DPDT Series
    ACSI K-128 Request To Exit Switch Kit for Design 1000 Series
    ACSI K-129 Request To Exit Switch Kit for Falcon 24, 25 Series
    ACSI K-130 Request To Exit Switch Kit for Jackson 20 Series
    ACSI K-131 Request To Exit Switch Kit for Falcon 1690, 1790 Series
    ACSI K-123 Latch Bolt Monitor Switch Kit for Von Duprin 33A, 35A, 98, 99 Series
    ACSI K-127 Latch Bolt Monitor Switch for ACSI 1500K-VD ELR Kit on Von Duprin 33A, 35A. 98, 99 Series

Product Specs

Subcategory:
Electric Exit Device Switch Kits
Series:
1500 Series
Collection:
1500 Series
Product Type:
Exit Device Field Install Kits
Compatibility:
Design 1000 Series
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Function:
Part/Component
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Product Function:
Part/Component
Fire Rating:
No
Product Category:
Electronic Access Control
Department:
Door Hardware

ACSI K-128 – Frequently Asked Questions

1) Which exit devices does the ACSI K-128 request-to-exit switch kit fit?
The K-128 is built for Design Hardware 1000 Series exit devices. It is a device-specific kit, so it will not drop into a Von Duprin, Sargent, Falcon or other brand push bar. ACSI builds a separate kit for each of those families, for example the K-100 for Von Duprin 33A, 35A, 98 and 99, the K-103 for Sargent 80 Series, and the K-129 for Falcon 24 and 25.
2) What switch contacts does the ACSI K-128 kit use, and can it switch my mag lock power directly?
The kit uses a single SPDT (single pole double throw) switch assembly rated 3A at 125VAC and 2A at 30VDC. Most 12 or 24VDC mag locks draw well under 2A, so the switch can break lock power directly within that rating, and the double-throw contact gives you both a normally open and a normally closed leg off one switch. If you need two independent circuits, such as releasing a lock and shunting an alarm on separate contacts, ACSI builds DPDT versions in this family (K-200, K-203, K-226) for other device brands.
3) What does the K-128 switch actually sense on the exit device?
It senses the push bar. The switch mounts inside the device and is actuated when the actuating bar is depressed, so it signals the moment someone pushes to exit, not when the latch retracts or the door swings. That is what makes it a request-to-exit device: instant release of a mag lock for free egress, shunting a door alarm so legitimate exits do not trip it, or sending a signal to a control console. If you need to know the latch itself is thrown rather than the bar pressed, that is a latch bolt monitor job, which ACSI covers with the K-123 and K-127 kits.
4) Is the ACSI K-128 a field install kit or does the exit device have to come from the factory with the switch?
Field install. ACSI Series K switch kits are made to be added to exit devices already hanging on the door, and the K-128 ships as a switch assembly with long wire leads plus installation instructions. The long leads matter on a retrofit: they give you enough slack to run out through the device and into a door cord or power transfer without splicing inside the chassis.
5) Can I use the K-128 kit on a fire rated exit device opening?
The K-128 switch kit itself carries no fire rating. It is an electrical component added to the device, not a labeled assembly, so if the opening is fire rated you need to confirm the exit device and door label allow the field-added switch before you cut into the chassis.
6) Do I need a request-to-exit switch if my doors already have mag locks and a push bar?
If a mag lock holds the opening, something has to drop power the instant the bar is pushed, and a switch kit like the K-128 inside a Design Hardware 1000 Series device is the way it is normally done. Pushing the bar throws the SPDT contact and releases the lock for free egress in the same motion. Without that switch, the bar retracts the latch but the magnet still holds the door shut.
7) I have a mix of exit device brands in the building. Can one ACSI switch kit cover them all?
No. The Series K kits are matched to the device, so you order by whatever is on each door. The K-128 covers Design Hardware 1000 Series only. Across a mixed building you would also be looking at the K-101 for Von Duprin 55, the K-102 for Von Duprin 88, the K-104 for Sargent 9600/9700/9800/9900, the K-106 for Adams Rite 8000 and 3000, the K-107 for Corbin Russwin 8000 and Yale 2100, the K-125 for Dorma 9000, the K-126 for Hager 4500/4600, PDQ 6200 and Stanley QED100/200/300, and the K-130 for Jackson 20 Series.
8) Is the ACSI K-128 suitable for commercial access control, or is it a residential part?
It is a commercial electronic access control component, used on commercial exit devices in buildings where a mag lock or door alarm needs a free-egress signal. A property manager standardizing a building on Design Hardware 1000 Series bars can spec the K-128 across every one of those openings and keep a single part number in the MRO stock.
How fast can I get the ACSI K-128 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI K-128 come with a warranty?
Absolutely. The ACSI K-128 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI K-128?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ACSI K-128 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!