You may also like
Anchors 5/8-11 MS Lead (Box 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics 1410 – Frequently Asked Questions
1) What thread size do the Metallics 1410 lead anchors take?
The Metallics 1410 machine screw lead anchor is sized for a 5/8-11 machine screw or bolt. That is a 5/8 inch diameter with 11 threads per inch, the standard UNC coarse pitch at that diameter, so any off-the-shelf 5/8-11 bolt, threaded rod, or hanger rod threads straight into it.
2) Can I use the Metallics 1410 anchor in drywall or hollow block?
No. A machine screw lead anchor needs solid base material, concrete, solid masonry, or stone, because it works by the lead sleeve expanding against the wall of a drilled hole. In drywall or a hollow block cell there is nothing to expand against. For those substrates you want a toggle or a hollow-wall anchor instead.
3) How many anchors come in a box of Metallics 1410?
They ship 25 to a box. If you are hanging a run of strut, trapeze supports, or heavy conduit racks off a concrete deck, count your drop points first, since one anchor is consumed per point and partial boxes are not how these are packed.
4) What is a machine screw lead anchor actually used for on an electrical job?
It is a female anchor set into a drilled hole in concrete, brick, or block that gives you a permanent 5/8-11 threaded socket. Electricians use them for threaded rod drops carrying strut and cable tray, for bolting panel and transformer mounting frames to walls, and anywhere a bolt needs to come out later without destroying the anchor. Because the thread is in the anchor, not the fastener, you can remove and re-install the bolt as often as you need.
5) Do I need a setting tool for the 1410 lead anchor?
Yes. Lead machine screw anchors are expanded with a matching setting punch before the bolt goes in, and the punch is sized to the anchor, so you need the one that matches a 5/8-11 anchor. The setting tool is a separate item and is not included with the box of 25.
How fast can I get the Metallics 1410 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 1410 come with a warranty?
Absolutely. The Metallics 1410 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 1410?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 1410 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.