Arrow GL08 Dummy Cylindrical L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$151.41
$107.96
Arrow Arrow GL08 Dummy Cylindrical Lock - Grade 2, Sierra Lever, Non-Keyed AR-GL08

Arrow GL08 Dummy Cylindrical Lock - Grade 2, Sierra Lever, Non-Keyed

(No reviews yet) Write a Review

Model: GL08-SR-26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$151.41
$107.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ARROW GL Series Cylindrical Locksets

Arrow GL Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance.
The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Simply put, the GL Series will be your number one choice when economy is your first priority.


Standard features

  • Housing: Interlocking lever tubes are made from dichromate plated steel. The tubes are attached to the rose insert. This offers fantastic support for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series are not used on the GL.
    Requires standard 2-1/8" (53.97mm) bore through door.
  • Thru-Bolts: Removable thru-bolts standard on GL Series.
  • OverDrive: Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when handle is locked. Built-in stops in the rose insert prevent lever from traveling beyond approximately 70 degrees.
  • Backset: 2-3/4" (69.85mm) standard. See price book for alternate backsets.
  • Latch: Stainless Steel with 1/2" (12.7mm) throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required.
  • Latch Front: Brass and stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm), 1/8" (3.175mm) in 2" (50.8mm).
  • Exposed Trim: Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks.
  • Rose Inserts: Contain coil spring which is a permanent assembly within rose insert. Inside and outside rose scalps are retained by dimples that create an interference fit with the rose inserts. There are no special retention features added to the rose insert that align the scalp.
  • Strike: Brass and stainless steel. ANSI A115.2, 4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip strike standard.
  • Door Thickness: 1-3/8" (34.92mm) to 2" (50.8mm).
  • Handing: Non-Handed

DOWNLOADS and RESOURCES

GL Series Cut Sheet


Manufacturer Resources

Product Specs

Subcategory:
Cylindrical Locks
Product Group:
Mechanical Locks
Series:
GL Series
Grade:
Grade 2
Keyed Function:
Non-Keyed
Warranty:
5 Year
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Keyed:
No
Fasteners:
Wood and Machine Screws
Commercial/Residential:
Commercial
Function Description:
Rigid trim for one side of door only. Used as pull or to match active trim.
Lock Type:
Cylindrical
Handle Type:
Lever
Lock Function:
Dummy
Product Attribute:
Cylindrical Locks
Product Model:
GL08
Product Function:
Dummy
Door Hand Direction:
Non-Handed
Door Thickness Range:
1-3/4" to 2"
Product Category:
Mechanical Locks
Department:
Door Hardware

Arrow GL08-SR-26D – Frequently Asked Questions

1) Does the Arrow GL08 dummy lever actually latch, or is it just a pull?
It's trim only. The GL08 is rigid trim for one side of the door, used as a pull or to match the active trim on the adjacent leaf. There is no latch and no keying, so it does not secure or hold the door closed. If you need the door to latch, you want a passage or entry function lockset instead.
2) I need a dummy lever on one leaf of a pair to match a working lever on the other. Will the Arrow GL08 do that?
That is exactly what it's for. The GL08 is single-side rigid trim meant to match the active trim on the working leaf, so on a pair of doors you put the functioning GL lockset on the active leaf and the GL08 on the inactive one. Because the Sierra lever and rose are the same family, the two leaves read as one set. Order the same finish on both.
3) Do I get two levers with the Arrow GL08, or only one?
One side only. The GL08 is single dummy trim, so a through-door pair of levers takes two units. If you want both faces in a single order line, Emtek sells dummy leversets as a pair, for example the Classic Cortina dummy pair or the Arts and Crafts dummy pair, though those are decorative trim rather than a Grade 2 commercial line.
4) What is the closest Grade 2 dummy lever alternative to the Arrow GL08?
The BEST 7KC Series 1DT single dummy trim is the nearest match - it is a Grade 2, non-keyed, medium duty cylindrical single dummy lever, the same dummy function and grade as the Arrow GL08 Grade 2 dummy cylindrical lever. Both are rigid trim for one side of the door, used as a pull or to match active trim. Differences come down to lever style and finish range, so confirm the lever design matches the other openings before standardizing.
5) If the opening needs a heavy duty dummy lever instead of Grade 2, what should I use?
Step up to a Grade 1 dummy. The BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty non-keyed, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever. Both serve the same purpose as the Arrow GL08 Grade 2 dummy - fixed trim on one face - but carry the higher ANSI grade often called for on high-traffic corridors and institutional openings.
6) The door actually needs to latch - what takes the place of the Arrow GL08 there?
A dummy will not latch; the GL08 is fixed trim with no latch mechanism. For a latching, non-keyed opening use a passage lever: the Accentra 4601LN and 5301LN Augusta are both Grade 2 passage/closet cylindrical levers, the Falcon B101 is a Grade 2 non-handed cylindrical passage lever, and the Hager 2510 is a Grade 2 passage lever for doors 1-3/8 inch to 2 inch thick.
7) Is the Arrow GL08 rated for commercial use, and what grade is it?
It's a Grade 2 commercial cylindrical leverset, so it's aimed at medium-duty openings in offices, multi-family and light institutional work rather than residential-only use. For heavy-traffic openings where a facility standardizes on Grade 1, a Grade 1 dummy trim like the BEST 9K Series 1DT or the Accentra 455LN Augusta is the step up.
8) Is a dummy lever the right choice for a closet door, or should I use a passage set?
Use a dummy only if the door is held shut by something else, like a ball catch, magnetic catch or roller catch, since the GL08 is rigid trim with no latch. If the closet door needs to latch when pushed shut, go with a passage function instead, such as the Accentra 5301LN Augusta Grade 2 or the Hager 2510 Grade 2 passage lever.
9) Is the Arrow GL08 keyed, or can it be keyed later?
Non-keyed, and it cannot take a cylinder. Dummy trim has no lock mechanism at all, so if the opening may need key control later, specify a keyed function from the GL Series now rather than planning to retrofit a cylinder into this one.
10) Is the Baldwin 5103 half dummy interchangeable with the Arrow GL08?
Not directly. Both are dummy function, but the Baldwin Estate 5103 half dummy is offered as distinct left hand and right hand versions on a 5048 rose, while the Arrow GL08 is non-handed, so one part number covers either door. If you order Baldwin you must specify the hand; with the GL08 you do not.
11) I need dummy levers on both faces of a pair of doors - is the GL08 the right call?
The Arrow GL08 is rigid trim for one side of the door only, so you would order one per face. If you prefer a set supplied as a pair, Emtek offers dummy pairs in the Arts and Crafts lever, the Hammered lever, and the Classic Cortina lever. Those are decorative brass trims rather than a Grade 2 commercial lever, so choose based on whether the opening is a finished residential-style door or a commercial corridor.
12) The opening needs to lock with a key - what do I order instead of the GL08?
The GL08 is non-keyed dummy trim and accepts no cylinder. For keyed commercial openings at the same Grade 2 level, the Hager 2525 is a Grade 2 entry lever, the Hager 2580 is a Grade 2 storeroom lever with a Withnell lever, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt, and the Falcon B511CP6D is a Grade 2 entry/office lever.
13) Will a Kwikset 200BRNL passage lever work in place of the Arrow GL08?
They are not equivalents. The Kwikset 200BRNL Breton is a Grade 3 passage lever that latches and fits doors 1-3/8 to 1-3/4 inch, while the Arrow GL08 is a Grade 2 commercial dummy - fixed trim with no latch - for doors 1-3/4 to 2 inch. Use the Kwikset only where a latching residential-duty passage set is acceptable and the door falls in its thickness range.
14) My door is thinner than 1-3/4 inch - what lever suits it if the GL08 does not?
The Arrow GL08 is specified for doors 1-3/4 inch to 2 inch. For thinner doors, the Hager 2510 Grade 2 passage lever covers 1-3/8 inch to 2 inch, the Dexter C1000 passage is Grade 1 for 1-3/8 to 1-3/4 inch, and the Falcon K101 Grade 1 passage covers 1-3/8 inch to 2-1/4 inch. All three latch, so pick one only where a functioning passage set is wanted rather than fixed trim.
15) Does a dummy lever like the GL08 carry a fire rating, or do I need a different product on a rated opening?
Fire-rated openings generally call for a latching lock. Among cylindrical levers, the Corbin Russwin CL3110 Grade 1 passage lever carries a fire rating and fits doors 1-3/4 to 2 inch, and the Falcon K101 Grade 1 passage is also fire rated. The Arrow GL08 is dummy trim with no latch, so on a rated door it would be used only where fixed trim is permitted alongside the rated hardware.
16) Which finishes does the Arrow GL08 Sierra dummy lever come in?
Three finishes: 605 bright brass, 613 satin bronze oil-rubbed, and 626 satin chrome. If you're matching existing Arrow trim on adjacent openings, 626 is the usual commercial choice and pairs with the satin chrome hardware already on most fire and corridor doors.
17) Will the Arrow GL08 dummy trim match other Arrow lever series on the rest of my doors?
The GL rose scalp is a streamline brass or bronze design made to complement Arrow's other lever series, so the GL08 sits alongside them without looking like an orphan. Keep the finish code consistent across openings, 605, 613 or 626.
18) What is the difference between the Arrow GL08 and the Design Hardware J75?
The Design Hardware J75 is a Grade 2 passage lever lockset with a flat lever for 1-3/4 inch doors - it latches. The Arrow GL08 is a Grade 2 dummy: rigid trim on one face used as a pull or to match active trim, with no latch. Same grade, different job. Design Hardware also lists the X75 as a Grade 1 passage lever for 1-3/4 inch doors if a heavier passage set is wanted.
19) Can I use a keyless pushbutton lever where I was considering the Arrow GL08?
Only if the opening needs access control rather than fixed trim. The Lockey 2835 mechanical pushbutton keyless lever has passage function and fits doors 1-3/16 to 2 inch, and the Lockey 1150 heavy duty keypad lever set covers 1-1/8 to 2 inch. The Arrow GL08 is non-keyed dummy trim with no operating mechanism, so it controls nothing - the two are chosen for opposite reasons.
How fast can I get the Arrow GL08-SR-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Arrow GL08-SR-26D come with a warranty?
Absolutely. The Arrow GL08-SR-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Arrow GL08-SR-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Arrow GL08-SR-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

!