Arrow MLX87 Classroom Function...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$194.66
$93.14

Arrow MLX87 Classroom Function Cylindrical Lock - Grade 2, Key in Lever Cylinder, Sierra Lever, Keyed

(No reviews yet) Write a Review

Model: MLX87-SR-26D
$194.66
$93.14
Selected Finish is
Selected Cylinder Type is
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$194.66
$93.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

ARROW MLX Series Cylindrical Locksets

The MLX Series is a robust Grade 2 lockset featuring a FreeWheeling Lever for abuse resistance, two screw lockset install for quick installation and a 10 Year Mechanical Warranty. The perfect solution for replacing or upgrading lockets in commercial applications.


Standard features

  • Door Preparation: Requires standard 2-1/8" (53.97mm) bore
    through door.
  • Door thickness: Fits 1-3/8" (34.93mm) to 1-3/4" (44.45mm) doors
    standard.
  • Backset: 2-3/4" (69.85mm).
  • Latch: Stainless Steel 1/2" (12.7mm) throw, UL Listed, guarded latchbolt on all locking functions
  • Latch Front: 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset.
  • Exposed Trim: MLX Levers are pressure cast zinc measuring 4-3/4" (120.65mm) in length. MLX Roses are wrought brass 3-11/32" (84.8mm) diameter. Total projection from face of door is 2-17/32" (64.5mm).
  • Strike: 4-7/8" ANSI (123.83mm)
  • Cylinder: Solid brass 6 pin, Arrow AR and Schlage CS Keyway,
    keyed different
  • Keys: 2 brass keys.
  • Handing: Non-Handed
  • Thru-bolts: Removable thru-bolts standard on RL Series.

DOWNLOADS and RESOURCES

MLX Series Cut Sheet

MLX Series Instruction


Manufacturer Resources

Product Specs

Subcategory:
Cylindrical Locks
Product Group:
Mechanical Locks
Series:
MLX Series
Grade:
Grade 2
Keyed Function:
Single Cylinder
Warranty:
10 Year
Standard Latch:
R21 Deadlatch; 2-3/4" Backset
Standard Strike:
306 ASA ANSI Strike, 4-7/8" x 1-1/4"
ANSI/BHMA:
F84
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Keyed:
Yes
Fasteners:
Wood and Machine Screws
Commercial/Residential:
Commercial
Latch Faceplate:
1-1/8" x 2-1/4"
Function Description:
Latchbolt operated by lever either side except when key outside locks outside lever. Inside lever always free. Key outside locks/unlocks outside lever only.
Lock Type:
Cylindrical
Handle Type:
Lever
Lock Function:
Classroom
Product Attribute:
Cylindrical Locks
Product Model:
MLX87
Product Function:
Classroom
Door Hand Direction:
Non-Handed
Door Thickness Range:
1-3/8" to 1-3/4"
Product Category:
Mechanical Locks
Department:
Door Hardware

Arrow MLX87-SR-26D – Frequently Asked Questions

1) What does the Arrow MLX87 classroom function actually do when someone locks it?
Classroom function means the key works only from the outside. Turning the key outside locks or unlocks the outside lever; the inside lever always retracts the latch, so no one is ever trapped in the room. There is no thumbturn or button on the inside to lock with, which is the point of the function: the teacher or facility staff holding the key controls the door, and a student cannot lock or unlock it from within. If you need a lock that can be secured from inside the room during a lockdown, classroom function is the wrong choice, and a classroom security or storeroom function is what you want instead.
2) Will the Arrow MLX87 fit a 1-3/4 inch commercial door with a standard 2-1/8 inch bore?
Yes. The MLX87 is prepped for the standard 2-1/8 inch cross bore through the door and covers 1-3/8 to 1-3/4 inch thickness as standard, which takes in both the 1-3/4 inch commercial door and the older 1-3/8 inch interior door. Backset is 2-3/4 inches, the usual commercial backset, and the latch front measures 1-1/8 by 2-1/4 inches. If your existing prep is a 2-3/8 inch backset, this will not line up without redrilling.
3) Will the Arrow MLX87 latch into the strike that is already in my frame?
It ships with a 306 ASA ANSI strike, 4-7/8 by 1-1/4 inches, which is the standard commercial frame prep, so on a hollow metal frame already cut for ASA strike it drops straight in. The latch is stainless steel with a 1/2 inch throw and a guarded deadlatching plunger, so the strike lip has to sit close enough for the plunger to ride the strike face and deadlock the bolt. If your existing frame has a small residential T-strike or a round-corner strike, use the supplied ANSI strike and enlarge the prep rather than reusing the old one.
4) What keyway does the Arrow MLX87 come in and can I key it into my existing master system?
The cylinder is solid brass, six pin, in Arrow AR or Schlage C keyway, supplied keyed different with two brass keys. Schlage C is the most common commercial keyway in North America, so if your building is already on a Schlage C system a locksmith can rekey these into it. There is also an SFIC option that ships less core, which is what you order if your facility runs small format interchangeable core and you want to drop your own cores in. On the order form, keying is a required choice: keyed different, keyed alike across multiple locks, or none if you are taking a less-cylinder route.
5) Is a Grade 2 lever like the Arrow MLX87 enough for a school corridor, or should I go Grade 1?
Grade 2 is the commercial medium duty tier and the MLX87 is built for it, with a free wheeling lever so a kick or a hanging backpack spins the lever instead of loading the internals. It carries the ANSI/BHMA F84 classroom function designation. For a high traffic main corridor or a door that takes real abuse, a Grade 1 classroom lock is the heavier answer, and the Dexter C1000 Series classroom lever is a Grade 1 clutching classroom lock covering the same 1-3/8 to 1-3/4 inch door range. For classrooms, offices, and back of house doors on a normal duty cycle, Grade 2 is the ordinary specification.
6) Will the Arrow MLX87 work on a 2 inch thick door?
No. Standard range is 1-3/8 to 1-3/4 inch doors, so a 2 inch door is outside it. For thicker leaves, the Hager 2525 entry and 2510 passage locks cover 1-3/8 to 2 inches, the Deltana Manchester, Morant and Linstead entry levers cover 1-3/8 to 2 inches, and the Falcon K101 Grade 1 passage lock goes to 2-1/4 inches. Those are different functions, so match the function you need before ordering.
7) What is the closest Grade 2 classroom function lever lock to the Arrow MLX87?
The Cal-Royal AG03 is the nearest straight equivalent. It is a Grade 2 classroom lever with a 6-pin Schlage C keyway keyed different and a 2-3/4 inch backset, matching the MLX87's classroom function, Grade 2 rating and 2-3/4 inch backset R21 deadlatch. The MLX87 carries an ANSI/BHMA F84 designation and ships with Arrow AR and Schlage CS keyway cylinders, so a building already keyed to Schlage C can be served by either, while an Arrow AR keyed facility stays with the MLX87.
8) What classroom lever should be used on a high traffic school corridor door instead of a Grade 2 lock?
The Dexter C1000 Series classroom lock is the Grade 1 step up. It is a Grade 1 classroom cylindrical lever with a clutching lever, keyed, fitting doors 1-3/8 to 1-3/4 inch thick - the same door thickness range the Arrow MLX87 fits. The MLX87 is Grade 2 with a FreeWheeling lever for abuse resistance. Where a specification calls out ANSI/BHMA Grade 1 for the opening, the C1000 classroom meets it.
9) Which lever lock allows a teacher to lock the classroom door from inside during a lockdown?
The Dexter C1000 Series classroom security lock is the one to use. It is a Grade 1 classroom security cylindrical lever, clutching and keyed, for doors 1-3/8 to 1-3/4 inch thick. On the Arrow MLX87 the key works only from the outside: the latchbolt is operated by the lever either side except when the key outside locks the outside lever, and the inside lever is always free. A door that must be secured without stepping into the corridor needs the classroom security function rather than plain classroom.
10) What lever lock works for a patient room or holding room where the key must operate both sides?
The Dexter C1000 Series asylum lock, ANSI F87, is a Grade 1 cylindrical lock for doors 1-3/8 to 2 inch. Asylum function keys from both sides, so neither lever releases the latch without a key. The Arrow MLX87 is ANSI F84 classroom function, with the inside lever always free for free egress. For a room where controlled movement is required on both sides, the asylum lock is the correct function, not a classroom lock.
11) Which lever lock has a 2-3/8 inch backset for a door already bored at that dimension?
The Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset, fitting doors 1-3/8 to 1-3/4 inch. The Arrow MLX87 uses a 2-3/4 inch backset with an R21 deadlatch and a 1-1/8 by 2-1/4 inch latch front, so a door prepped at 2-3/8 inch would need the latch bore moved. The bore itself is the same standard 2-1/8 inch through the door.
12) Do I have to order the Arrow MLX87 left hand or right hand?
No handing to specify. The MLX87 is non-handed, so one part number covers left and right swings and you can stock a single lock for a building with doors going both ways. That also means a mis-swung door on site does not cost you a return.
13) How much does the Arrow MLX87 lever stick out from the door face, and how big is the rose?
Total projection off the door face is 2-17/32 inches. The lever itself is pressure cast zinc at 4-3/4 inches long, and the rose is wrought brass, 3-11/32 inches in diameter. Those numbers matter when the lock sits near a door frame, a return wall, or in a corridor where a projecting lever is a snag point, and the rose diameter tells you whether it will cover the scars left by the trim you are pulling off.
14) Can I install the Arrow MLX87 on a wood door and a hollow metal door with the same kit?
Both. Wood and machine screws are supplied, so the same lock covers a wood classroom door and a hollow metal frame door. Installation is a two screw lockset with removable thru bolts, so a maintenance tech can swap one out without a specialty tool, and the two piece prep means the standard 2-1/8 inch bore is all the door work required.
15) I need matching passage and storeroom levers to go with a classroom lock on the same corridor. What pairs with this?
The MLX87 is the classroom function in Arrow's MLX Series, so the straightforward route to matching trim on the other doors is to stay in the MLX Series and change the function. If you are specifying a fresh set across the building rather than matching Arrow, the Hager 2580 with the Withnell lever is a Grade 2 storeroom cylindrical lock and the Hager 2510 is the Grade 2 passage version, both covering 1-3/8 to 2 inch doors. Cal-Royal's AG Series also runs a matching family, with the AG03 classroom lever on a 2-3/4 inch backset and the AG05 Grade 2 storeroom lever.
16) What do I need to specify when ordering an Arrow MLX87 classroom lever?
Three decisions. Cylinder type: standard conventional cylinder, or IC less core if you run SFIC and will supply your own cores. Finish: 626 satin chrome, 605 bright brass, 613 satin bronze oil rubbed, or BSP black suede. Keying is required: keyed different, keyed alike if you want a group of locks on one key, or none when you are going less cylinder. There is also an optional key code field if your facility keys to a specific bitting on file. Handing is not a decision, since the lock is non-handed.
17) What is the difference between a classroom lever and a storeroom lever for a locked supply room?
On a storeroom lock the outside lever is always locked and the key retracts the latch, so the door secures itself every time it closes. The Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for doors 1-3/8 to 1-3/4 inch, and the Hager 2580 is a Grade 2 storeroom lock with a Withnell lever for doors 1-3/8 to 2 inch. The Arrow MLX87 is a classroom function lock, where the outside lever stays unlocked until the key locks it and the inside lever is always free - suited to a room meant to be open during the day and locked deliberately.
18) Is a Falcon B511 or a Hager 2525 the same thing as an Arrow MLX87?
No. The Falcon B511CP6D is a Grade 2 medium duty cylindrical lever with entry/office function and the Hager 2525 is a Grade 2 commercial cylindrical entry lock. Entry/office locks are locked and unlocked from the inside by a button or turn. The Arrow MLX87 is a classroom function lock: the outside lever is locked and unlocked by the key outside only, with the inside lever always free and no inside locking control. If the door is on a keying schedule that assumes key-only control, the entry/office locks are not a swap.
19) What non-keyed lever matches a classroom lock on the same corridor for closet and hall doors?
For the openings on the same run that do not need keying, the Falcon B101 is a Grade 2 medium duty non-handed cylindrical passage lever and the Design Hardware J75 is a Grade 2 passage lever lockset with a flat lever for 1-3/4 inch doors. Both are Grade 2 like the Arrow MLX87, which is non-handed as well, so a fleet can carry one grade of lock across keyed and non-keyed openings.
20) What lever lock avoids issuing keys for a room that a rotating group of staff needs to open?
A mechanical keypad lever removes the key entirely. The Delaney LP250 is a Grade 2 electronic keypad leverlock, and the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for doors 1 3/16 to 2 inch. The Arrow MLX87 works from a solid brass 6 pin cylinder in Arrow AR or Schlage CS keyway with two brass keys, and can be ordered keyed alike so one key runs a group of doors - the choice is between combination codes and a master keying schedule.
21) Is a Grade 3 lever an acceptable substitute for a Grade 2 classroom lock on a commercial door?
Grade 3 leversets such as the Cal-Royal AUS00 entrance/office lock with a solid brass forged body for 1-3/8 to 1-3/4 inch doors, the Callan Artino entrance leverset, and the Master Lock RL Series keyed entry lockset are built to the residential-duty end of the ANSI/BHMA scale. The Arrow MLX87 is a Grade 2 commercial lock carrying an F84 designation. Where a facility standard or a drawing calls out Grade 2 commercial, a Grade 3 lever does not satisfy it, and none of those three offers classroom function.
22) Which classroom lock accepts an interchangeable core so the facility can rekey in-house?
The Arrow MLX87 is available in an IC - SFIC less core configuration alongside the standard conventional cylinder, in 605 bright brass, 626 satin chrome, 613 satin bronze oil-rubbed and BSP black suede. Among Grade 2 classroom peers, the Cal-Royal AG03 is supplied with a 6-pin Schlage C keyway keyed different. A facility already running small format interchangeable cores can take the MLX87 less core and drop its own cores in.
23) What classroom-area lever lock should be specified when the opening is a fire rated door?
Among the peers that publish a fire rating, the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet cylindrical lever with a fire rating for doors 1-3/4 to 2 inch, and the Falcon K101 is a Grade 1 fire rated passage lock for 1-3/8 to 2-1/4 inch doors. Both are passage function. The Arrow MLX87 uses a UL Listed guarded stainless steel latchbolt with 1/2 inch throw on all locking functions and a 4-7/8 inch ANSI strike.
24) What lever lock should be used when the classroom door needs to release on an access control signal?
The Corbin Russwin CL33903 fail safe electrified cylindrical lever, 12VAC/DC with NZ lever and D rose, is the Grade 1 option for doors 1-3/4 to 2 inch. A fail safe electrified lock unlocks when power is removed, which is how an opening tied into an access control or fire alarm interface behaves. The Arrow MLX87 is a purely mechanical classroom lock with a 2-3/4 inch backset R21 deadlatch and no electrical provision, so it cannot be tied to a card reader or release signal.
25) What finishes does the Arrow MLX87 Sierra lever come in, and can I get any of them less core?
Four finishes: 626 satin chrome, 605 bright brass, 613 satin bronze oil rubbed, and BSP black suede. Every one of the four is offered both with a standard conventional cylinder and as SFIC less core, so a facility standardizing on interchangeable core does not have to give up its finish. 626 satin chrome is the default institutional finish if you are matching existing commercial hardware.
26) Is a Baldwin or Emtek lever a substitute for a commercial classroom lock?
No. The Baldwin Estate 5103 with 5048 rose is offered in passage, privacy and half dummy functions, and the Emtek Classic Brass Cortina leverset is a dummy pair. Dummy trim has no latch at all and privacy locks use an inside turn with an emergency release. The Arrow MLX87 is a keyed classroom lock with a single cylinder and a UL Listed guarded stainless steel latchbolt. Those decorative levers cover different openings entirely.
27) What matching dummy lever pairs with a Grade 2 cylindrical lock on an inactive leaf?
The BEST 7KC Series single dummy trim is a Grade 2 medium duty cylindrical lever, and the Callan Bentley is a Grade 2 dummy lever. Both sit at the same Grade 2 level as the Arrow MLX87, so the inactive leaf of a pair of doors can carry trim of matching duty alongside the keyed classroom lock on the active leaf. For a Grade 1 opening the BEST 9K Series 1DT is the heavy duty single dummy trim.
How fast can I get the Arrow MLX87-SR-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Arrow MLX87-SR-26D come with a warranty?
Absolutely. The Arrow MLX87-SR-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Arrow MLX87-SR-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Arrow MLX87-SR-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.