Door Guards

482 SOLID BAR DOOR GUARD For use on doors that are flush with frames; The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing; The hinged bar allows the door guard to be positioned 180°...

481 CHAIN DOOR GUARD Permits the door to be slightly opened to allow viewing; Narrow chain holder maintains chain in stationary position when door guard is not in use, eliminating marring of door and frame caused by dangling chain; Welded twist link...

FG38000 SERIES FRAME GUARDS Trimco’s FG Series of frame guards allows protection from wheeled equipment hitting and damaging door frames. Equipment such as wheelchairs, gurneys, heavy food carts and hospital beds will be deflected from hitting the...

4016 SERIES SWING ARM DOOR GUARD The 4016 is a swing arm door guard made from bronze or brass. The hinged bar allows the guard to be positioned 180° away from the door when not in use. Edge protector and spacers available.   FEATURES...

482 SOLID BAR DOOR GUARD For use on doors that are flush with frames; The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing; The hinged bar allows the door guard to be positioned 180°...

FEATURES: Privacy Door Latch Material: Zinc Die Cast Height: 2 ⅛” Width (Base): 1 ½” Weight: 0.65 lbs/unit Opening Angle: 87°

4016 SERIES SWING ARM DOOR GUARD The 4016 is a swing arm door guard made from bronze or brass. The hinged bar allows the guard to be positioned 180° away from the door when not in use. Edge protector and spacers available.   FEATURES...

K39 SERIES FINGER GUARDS Trimco’s K39 Finger Guards are constructed of heavy gauge clear vinyl that attaches to the door stop at the hinge side of the door. Essential for daycare facilities, nurseries and pre-schools, Finger Guards protects little...

PG8000 SERIES PANIC AND LATCH GUARDS Trimco’s PG8000 Series Latch Guards prevent damage to the lower latch of an exposed rod panic device from work carts, fork lifts and pallet jacks, as well as shield the foot area of wheel chair users...

DOOR GUARD, CHAIN / DOORBOLT Deltana Door Guards are ideal to improve security for entry doors allowing them to partially open. They are available in an array of fine finishes. U/M: each Box Qty: 15 pc Case Weight: 26 lbs Material: Solid Brass Case Qty:...

4" DOOR GUARD Deltana Door Guards are ideal to improve security for entry doors allowing them to partially open. They are available in an array of fine finishes. U/M: each Box Qty: 10 pc Case Qty: 100 pc Packed: Packed In Individual Poly Bags with...

5" DOOR GUARD Deltana Door Guards are ideal to improve security for entry doors allowing them to partially open. They are available in an array of fine finishes. U/M: each Box Qty: 10 pc Case Qty: 50 pc Case Weight: 24 lbs Packed: Packed In Individual...

  Zinc Diecast Swing Bar Door Guard   Features Ball Bearing Stop Guide Die-cast material Individual poly-bagged Packed screw Arm Length: 4-1/4" Architectural finishes available

DG22 Provides security when viewing without fully openning door. Welded solid steel chains to prevent forced entry. Individually poly-bagged with sheet metal screws. Chain lenght: 9". Conforms to ANSI/BHMA 156.16. Architectural finishes available...

Packed with Door Angle Protector to avoid scarring the door or frame Angle Protector is packed with screw and adhesive Ball Bearing stop guide Individually poly-bagged with screws Arm length: 5" Conforms to ANSI/BHMA 156.16 Comparable to IVES 482B...

6-3/4" DOOR GUARD Deltana Door Guards are ideal to improve security for entry doors allowing them to partially open. They are available in an array of fine finishes. U/M: each Bar Width: .48 Box Qty: 10 pc Case Qty: 100 pc Extended Length: 6-3/4" Case...

Product SpecificationsFinishes 605, 606, 613, 625, 626Product Type Door Flip GuardANSI 1603 L33042,1604 L13042Shelf Pack 10Features Ball Bearing DesignIncludes AP-34Material 1603 Aluminum, 1604 Brass

Product SpecificationsFinishes 605, 606, 613, 625, 626Product Type Door Flip GuardANSI 1603 L33042,1604 L13042Shelf Pack 10Features Ball Bearing DesignIncludes AP-34Material 1603 Aluminum, 1604 Brass

Product SpecificationsFinishes 605, 613, 622, 626Product Type Door Flip GuardANSI L33042Shelf Pack 10Length 3"Width 2-3/4"Height 2-1/4"

Product SpecificationsFinishes 605, 625, 626Product Type Chain GuardShelf Pack 20Material Cast Brass

Product SpecificationsFinishes 605, 606, 613, 625, 626Product Type Door Flip GuardShelf Pack 100Features Angle PlateLength 1/2"Width 1"Height 1"

ROCKWOOD 603 DOOT GUARD LATCH Material: Cast aluminum; Finishes: bright chrome (CRM); Options: 1/8" clear plastic shim - order separately as 603 SHIM Fastner: Body: 3 ea. #6 x 1-1/2" FH SMS; Strike: 4 ea. #6 x 1" FH SMS   ROCKWOOD...

ROCKWOOD 604 DOOR GUARD Material: Solid cast brass; Finishes: US10, US15, US26D; Options:1/8" clear plastic shim – order separately as 604 SHIM   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional...

4015 CHAIN DOOR GUARD The 4015 is a chain door guard manufactured with heavy brass plates for strength and durability.   FEATURES & BENEFITS Heavy brass plates. Plate: 3-11/32 x 1-7/16 Chain: 8″ Holder: 7/8″ x 2-1/8″...