DynaLock 3000-TJ30 Single Insw...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$721.00
$560.31
DynaLock DynaLock 3000-TJ30 Single Inswing Electromagnetic Lock 1500 Lb. DYK-3000-TJ30

DynaLock 3000-TJ30 Single Inswing Electromagnetic Lock 1500 Lb.

(No reviews yet) Write a Review

Model: 3000TJ30
$721.00
$560.31

In Stock (leaves warehouse same day if ordered before 3pm ET)

$721.00
$560.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

DynaLock 3000 Series 1500 Lb. Electro Magnetic Locks

Model 3000-TJ30

3000-TJ30 Single Inswinging Door
Single coil. Mounts to the face of the frame header.
1500 Lbs. holding force.

The 3000 Series is a full size 1500 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings where maximum security and durability is required. All 3000 Series locks are designed for ease of installation with DynaLock’s exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate “door contacts”. The 3000 Series is offered in single, double, and split armature models for both outswinging and inswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.

Standard Features

• One Piece Housing made from high strength aluminum. A seamless housing means maximum resistance to weather and tampering.
• FasTrack Mounting: Speed up installation by mounting the FasTrak channel to the frame first. Lock can then be attached and removed with ease.
• Universal Design: Lock handing can easily be reversed in the field, allowing placement of the coil adjacent to the vertical jamb where it will exert the most efficient force.
• Low power consumption conserves energy, reduces operation cost, and extends battery backup time.
• A totally plated coil and armature provides protection against corrosion.
• A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates.
• No residual magnetism - the door releases without delay when lock is de-energized.
• Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized.
• Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.

Electromagnetic locks, surface mounted for outswing or inswing single or double doors.
Size: 1-1/2”D x 2-3/4”H x 11”L Single or 22”L Double
Multi-voltage auto-sensing 12/24 VAC/VDC
Current Draw: 374 mA @ 12VDC Single / 748 mA Double,210 mA @ 24VDC Single / 420 mA Double
Adjustable Relock Time Delay (Former TD Option) is standard on all models

DSM - Door Status Switch - Signals door closed or ajar

HSM - High Security Monitor. Includes the following: Door Status Switch - Signals door closed or ajar. Dynastat Force Sensor - Indicates efficient magnetic bond.

VOP - Value Option Package. Includes the following: Door Status Switch - Indicates door closed or ajar. Dynastat Force Sensor - Indicates efficient magnetic bond. Anti-Tamper Switch - Signals removal of wiring access cover.

DynaLock_Corp-2022-A-Catalog_HQ_Print_20211027.pdf

http://www.dynalock.com/

Manufacturer Resources

Product Specs

Subcategory:
Electromagnetic Locks
Series:
3000 Series
Holding Force:
1500 lbs.
Product Group:
Electronic Access Controls
Product Subgroup:
Electromagnetic Locks
Commercial/Residential:
Commercial
Battery Operated:
No
Door Type:
Inswing
Electronic:
Yes
Product Type:
Electromagnetic Locks
Warranty:
Lifetime Warranty
Product Model:
3000-TJ30
Product Voltage:
12/24 VDC
Product Size:
1-1/2"D x 2-3/4"H x 11"L
Mounting Method:
Surface
Product Category:
Electronic Access Controls
Department:
Door Hardware

DynaLock 3000TJ30 – Frequently Asked Questions

1) Will the DynaLock 3000-TJ30 work on an outswing door?
No. The 3000-TJ30 is built for a single inswinging door, with the coil and housing mounting to the face of the frame header. For an outswing opening you need a different 3000 Series configuration, since DynaLock offers the series in single, double, and split armature models for both outswinging and inswinging doors.
2) What voltage and current does the DynaLock 3000-TJ30 draw, and do I have to set it?
It auto-senses 12 or 24 VAC/VDC, so there is nothing to jumper for voltage. Draw on the single-magnet model is 374 mA at 12VDC or 210 mA at 24VDC. Size your power supply and battery backup off the voltage you actually run.
3) What is the difference between the DSM, HSM, and VOP options on this DynaLock?
DSM adds a door status switch that signals door closed or ajar. HSM adds that switch plus the Dynastat force sensor, which confirms an efficient magnetic bond. VOP is the door status switch, the Dynastat force sensor, and an anti-tamper switch that signals removal of the wiring access cover. The switches are ordered as options and there are eight monitoring combinations across the model, so specify the monitoring before you order rather than trying to add it later.
4) Does the door release immediately when power drops on this mag lock?
Yes. The 3000 Series has no residual magnetism, so the armature lets go without delay as soon as the lock is de-energized. Built-in spike suppression also protects the other solid state devices on the circuit at the moment of release. If you need a code-compliant delay on egress instead of instant release, that is a delayed egress product such as the Alarm Controls 1200DE, not this lock.
5) I need a mag lock for a pair of doors, not a single leaf - what should I order instead of the 3000-TJ30?
The 3000-TJ30 is the single inswing model, with a single coil mounting to the face of the frame header. For a pair of doors, look at the Dorma EML320 Electromagnetic Lock, Double Door, 1500 lb., or the Alarm Controls 1200D Series double magnetic locks. Both are built as double-door magnets rather than a single-leaf unit.
6) What should I use instead of the 3000-TJ30 on a sliding door?
The 3000-TJ30 is built for a swinging single inswing door, with the coil on the frame header and a pivoting armature on the door leaf. For a sliding door, the Schlage Electronics 320M is a compact mortise sliding door electromagnetic lock at 1500 lbs holding force, heavy duty, which keeps the same force class while suiting the sliding application.
7) I am replacing a Locknetics 390+ mag lock - is the DynaLock 3000-TJ30 a direct retrofit?
The 3000-TJ30 is not sold as a retrofit for another maker's footprint; it mounts with DynaLock's own FasTrak channel, which goes on the frame first so the lock can be attached and removed afterward. If you want to reuse the existing Locknetics 390+ prep, the Schlage Electronics M390RFK is described as a direct retrofit for Locknetics 390+ at 1500 lbs holding force with door status monitor, magnetic bond sensor, and relock time delay.
8) Do I need to order this mag lock handed?
No. Handing on the 3000 Series is reversible in the field, so you set the coil next to the vertical jamb where it pulls most efficiently. One part number covers either hand.
9) Can I skip separate door contacts if I use this mag lock?
Yes, if you order it with monitoring. The integrated door status switch reports closed or ajar for remote monitoring without installing separate door contacts, and the Dynastat force sensor on the HSM and VOP packages confirms the magnet is actually bonded rather than just powered.
10) Can I use this on a fire-rated door opening?
The 3000 Series is designed for life safety and high security use on rated or nonrated doors and frames, and is specified for commercial, industrial, and institutional openings. Confirm the full opening assembly against your local authority, since the rating belongs to the door and frame as installed.
11) Is a shear lock the same thing as the DynaLock 3000-TJ30?
No. The 3000-TJ30 is a surface mounted magnet, 1-1/2 in. D x 2-3/4 in. H x 11 in. L, that sits on the face of the frame header with the armature on the door. A shear lock such as the ROFU 8031-002, rated 2200 LB holding force at 12/24VDC and monitored, is concealed in the header and holds by shear rather than by face-to-face surface bond, so it is a different prep entirely and not a drop-in swap.
12) How do I get door and bond monitoring - is that built into the DynaLock 3000-TJ30 or do I need a different brand?
The 3000-TJ30 can be ordered with monitoring built in: a Door Status Switch to signal door closed or ajar, a High Security Monitor that adds the Dynastat force sensor for magnetic bond, and a Value Option Package that further adds an anti-tamper switch on the wiring access cover, so separate door contacts are not required. Peers bundle it differently - the Dorma EML310 BA DP is the single door 1500 lb. version with Bond Alert plus door position sensor, the Locknetics MG Series is offered in standard or monitored builds, and the Dortronics 1000 Series includes an SPDT door position switch.
13) Are there other 12/24VDC magnetic locks that work with the same power supply as the DynaLock 3000-TJ30?
The 3000-TJ30 is multi-voltage auto-sensing 12/24 VAC/VDC with a current draw of 374 mA at 12VDC and 210 mA at 24VDC for the single coil, so it runs off either a 12 or 24 volt supply without a jumper change. Other magnets in the same voltage window include the Dortronics 1000 Series, listed as 12/24VDC dual voltage field selectable, the Locknetics MG Series at 12/24VDC, and the ROFU 8512 single magnet at 1200 LB holding force, 12/24VDC.
14) My frame has very little header depth - what magnetic lock has a slimmer profile than the 3000-TJ30?
The 3000-TJ30 measures 1-1/2 in. D x 2-3/4 in. H x 11 in. L, and DynaLock notes the narrow 1-1/2 in. backset may let you skip added mounting brackets or filler plates. If you need slimmer still, the Dortronics 1107 is a narrow 2 inch slim line single door mag lock at 600lbs, trading holding force for a tighter footprint.
15) Does the 3000-TJ30 fail safe like the Dorma EML310?
Yes, in operating principle. The 3000-TJ30 holds the door only while energized - the armature is magnetically bonded to the lock face when the lock is energized, and with no residual magnetism the door releases without delay once power is dropped. The Dorma EML310 single door 1500 lb. models are likewise listed as electrically locked, fail safe. Both are power-to-lock magnets rather than power-to-unlock devices.
16) Does this DynaLock mag lock have a relock time delay?
Yes, adjustable relock time delay is standard on all 3000 Series models, so it is not a suffix you have to add. That covers the old TD option.
17) Can one installer put this up, and can it be pulled for service later?
The FasTrak mounting system is the reason this goes in quickly: the channel mounts to the frame first, then the lock attaches to it, and it comes off the same way for service without redoing the frame work. Wiring lands in dedicated compartments on the housing.
How fast can I get the DynaLock 3000TJ30 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 3000TJ30 come with a warranty?
Absolutely. The DynaLock 3000TJ30 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 3000TJ30?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 3000TJ30 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!