Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" to 1-3/4"
- Latch Faceplate: Round or Square Corner
- Material: Brass
Emtek 1482 Multi Point Lock Trim (Door Config #4) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Passage
- Can be ordered with any Brass Levers
- Swinging Patio Door Hardware. Set includes Plates, Handles
- Multi Point Mortise Lock Box not included. Trims Only
- Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources
Product Specs
- Subcategory:
- Multi Point Lock Trim
- Product Group:
- Mechanical Locks
- Commercial/Residential:
- Residential
- Product Type:
- Multi Point Lock Trim
- Product Subgroup:
- Multi Point Lock Trim
- Collection:
- Brass
- Cylinder Position:
- Above Handle
- Door Configuration:
- #4
- Electronic:
- No
- Keyed:
- No
- Lock Type:
- Multi Point Trim
- Ref. Door Manufacturer(s):
- Ashland, G-U, Caradco, JELD-WEN, Jeldwen Custom Collection (formerly Pozzi), Marvin, PGT, Premium Collection (formerly Norco), Weathershield
- Series:
- Concord
- Theme:
- American Classic
- Keyed Function:
- Non-Keyed
- Lock Function:
- Passage
- MAP Policy:
- Yes
- Product Model:
- 1482
- (CTC) Center-to-Center:
- 3-5/8"
- Product Function:
- Non-Keyed Passage
- Product Size:
- 2" x 10-1/2"
- Cylinder Classification:
- American
- Product Style:
- Concord
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 1482-US15 – Frequently Asked Questions
1) Which patio door brands does the Emtek 1482 Door Config #4 trim reference?
Door Configuration #4 is referenced to Ashland, G-U, Caradco, JELD-WEN, JELD-WEN Custom Collection (formerly Pozzi), Marvin, PGT, Premium Collection (formerly Norco) and Weathershield multi point doors. Configuration is about where the holes land in the door, so match your existing prep to #4 before ordering.
2) What door thickness does the Emtek Concord multi point trim fit?
1-3/8 inch through 1-3/4 inch doors, with an adjustable 2-3/8 or 2-3/4 inch backset and a 2-1/8 inch cross bore. Door thickness is a field you can specify when ordering, so give your actual measured thickness if it sits at the top of that range.
3) Can I pick the lever style on the Emtek 1482 Concord trim?
Lever choice is required at order and the range is wide, from L-Square, T-Bar and R-Bar bars in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through cast levers like Athena, Helios, Hermes, Luzern, Poseidon, Stuttgart, Cortina, Milano, Merrimack, Turino, Coventry, Rope, Rustic, Santa Fe, Wembley and Arts and Crafts. Any brass lever works with these brass plates.
4) Will the lever on this Emtek multi point trim sag over time?
Emtek multi point trims now include a spring assist that returns the lever to neutral, which is the usual cure for droopy patio door handles. Worth knowing if you're replacing older trim that sagged.
5) What finishes does the Emtek 1482 Concord multi point trim come in?
Eight brass finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL) and French Antique (US7). US3NL and US10B will patina over time; US3 lifetime and US26 hold their look, which matters if you're matching entry hardware across a house.
6) Is the Emtek 1482 multi point trim suitable for a commercial opening?
It's classified residential hardware, built for swinging patio doors in homes. For a commercial entrance with traffic and code requirements, look at a Grade 1 commercial lockset line rather than this brass patio trim.
How fast can I get the Emtek 1482-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1482-US15 come with a warranty?
Absolutely. The Emtek 1482-US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1482-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1482-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.