Emtek 1582 Multi Point Lock Trim (Door Config #5) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Passage

Door configuration is the first thing to settle. The 1582 Concord trim is built for Door Configuration #5: a 3-5/8 inch center-to-center between the handle and the cylinder hole, with the cylinder sitting below the handle, sized for a Euro profile cylinder. If your existing multi point door has a different spacing or the cylinder above the handle, this plate set will not line up with the holes in your door. Measure the center-to-center on the door before ordering.

Trim only. The 1582 set is plates and handles, and the multi point mortise lock box is not included. If the gearing inside your door is worn out or missing, this will not solve it, you need the lock body separately. This is the part to buy when the mechanism still works and the hardware on the face of the door is tired or the wrong finish.

Emtek references this multi point trim against doors from Crestline, Hoppe, Hurd, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Semco, Sierra, Oknoplast, Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor and Weathershield. Brand alone is not enough though, the door has to be a Configuration #5 layout with 3-5/8 inch center-to-center spacing and the cylinder below the handle.

Yes, and it is a required choice. The 1582 is ordered right hand or left hand, so stand outside the door, and the side the hinges are on tells you the hand. Get it wrong and the lever pitches the wrong way. There is no reversing it after the fact.

No. The 1582 Concord is a non-keyed passage trim, so the levers always turn and there is no cylinder or thumbturn in the set. It handles the multi point throw with the lever but does not key. If you need the door to lock from a key, this is the wrong function, look for the keyed version of the Concord multi point trim in the same 2 x 10-1/2 inch plate.

Sagging levers are a worn return spring in the trim, and the 1582 Concord addresses it directly. Every Emtek multi point trim now ships with a spring assist that pulls the lever back to neutral, so a heavy lever on a tall patio door stops drooping. That alone is a common reason to replace trim on a door whose lock body is still fine.

The Concord plate measures 2 x 10-1/2 inches in solid brass and takes any Emtek brass lever, 51 styles in all, from the L-Square, T-Bar and R-Bar bar levers in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through Athena, Helios, Hermes, Luzern, Poseidon and Stuttgart, to the traditional Cortina, Milano, Merrimack, Turino, Coventry, Rope, Rustic, Santa Fe, Wembley, Arts and Crafts and Hammered. Eight finishes: Oil Rubbed Bronze US10B, Satin Nickel US15, Pewter US15A, Flat Black US19, Polished Chrome US26, Polished Brass Lifetime US3, Unlacquered Brass US3NL and French Antique US7. That is enough range to match the interior door hardware already in the house.

Emtek lists the Concord multi point trim as residential hardware, and it is a passage function with no key, so it is not the part for a commercial entrance that has to lock and take public traffic. It belongs on a swinging patio door in a home, a condo or a multi-family unit. For a commercial opening you want a Grade 1 or Grade 2 commercial lockset instead.

The 1582 works to an adjustable 2-3/8 or 2-3/4 inch backset with a 2-1/8 inch cross bore, which are the two standard backsets and the standard bore, so it drops onto a conventionally prepped door. The latch faceplate is available round corner or square corner to match the mortise already cut in the edge of your slab.

Only across doors that share the same prep. Every door taking the 1582 has to be a Configuration #5 layout, 3-5/8 inch center-to-center with the cylinder below the handle, and 1-3/8 to 1-3/4 inches thick. Handing is per door, so count your rights and lefts. Where the prep matches, ordering the same Concord plate, lever style and finish gives you one look across the openings, and Emtek makes the same lever styles in interior trim so the passage doors inside can match.

Solid brass, plate and all, and it sits in Emtek's Brass collection. That matters on an exterior patio door where the trim sees weather, and it is why the unlacquered brass US3NL option will patina over time rather than flake the way a plated finish does.