You may also like
HES MUNL Mortise Electric Strike for Latchbolt Lock
Model: HES-MUNL
SECURITRON MUNL MORTISE UNLATCH STRIKE LOCK
Mortise UnLatch is for any application where an electric strike would be used for a mortise type lock. The Mortise UnLatch includes field adjustability for...
HES
Starting at
$874.00
$636.00
HES UNL UnLatch Electric Strike For Lock with Latchbolt
Model: HES-UNL
HES UNL UNLATCH STRIKE LOCK
UnLatch is for any application where an electric strike would be used for a cylindrical/tubular lockset. UnLatch supports full deadlatch function, releases under pressure...
HES
Starting at
$669.26
$430.54
HES 1500C Complete Electric Strike for Cylindrical & Mortise Latchbolt Locks
Model: HES-1500C
HES 1500C Electric Strike — Complete Pac for Latchbolt Locks
The HES 1500 Series Electric Strike sets a new standard in the industry by offering dynamic integrated adjustability and...
HES
Starting at
$728.12
$401.17
HES 5200C Electric Strike for Latchbolt Locks, Complete Pacs
Model: HES-5200C
HES 5200C ELECTRIC STRIKE, COMPLETE PACS WITH LATCHBOLT LOCKS
The 5200 series electric strike features an in-frame horizontal adjustable design to simplify the installation process. This features...
HES
Starting at
$261.60
$147.22
HES 1600 Series Electric Strike — Body Only
The HES 1600 Series Electric Strike is the most advanced electric strike available for cylindrical latchbolt and deadbolt locks. It accommodates up to a 1” deadbolt with enhanced vertical cavity spacing and fits every brand of cylindrical or mortise lock designed to work with a 4-7/8” strike plate.
The 1600 Series sets a new industry standard with dynamic integrated adjustability and field-configurable options compatible with any cylindrical or mortise lock. The modular platform makes stocking and installation easier with interchangeable faceplates and accessories. Available in seven fully finished finishes, the 1600 Series complements surrounding door hardware and blends seamlessly into the opening.
Complete One-Box Solutions
The 1600 Series is also available as Complete Pac bundles that pair the strike body with the appropriate faceplate kit:
- 1600CS Complete Pac — Includes 1LB faceplate kit (latchbolts) and 1DB faceplate kit (deadbolts)
- 1600CLB Complete Pac — Includes 1LB faceplate kit for latchbolt locks
- 1600CDB Complete Pac — Includes 1DB faceplate kit for deadbolt locks; low-profile design with integrated adjustability
Frame Applications
- Metal
- Wood
Electrical Specifications
- 0.24 Amps @ 12 VDC/VAC
- 0.12 Amps @ 24 VDC/VAC
- DC continuous duty / AC intermittent duty only
- Auto-sensing 12/24 VDC dual voltage
- PoE friendly
Standard Features
- Stainless steel construction
- Tamper resistant
- Static strength: 1,500 lbs
- Dynamic strength: 70 ft-lbs
- Endurance: 1,000,000 cycles
- Field selectable fail safe / fail secure
- Non-handed
- Interchangeable faceplates and accessories
- Field replaceable components
- Fully finished faceplate, keeper, case, and trim
- Field adjustable integrated shim
- ElectroLynx™ connectors
- SecuriCare 10-year no-fault warranty (5-year standard; 10-year with SmartPAC III)
Monitor Options
- LM — Lock monitor
- DLM — Dual lock monitors
- LMS — Lock monitor and strike monitor
- DLMS — Dual lock monitors and strike monitor
Available Finishes
- 605 — Bright Brass
- 606 — Satin Brass
- 612 — Satin Bronze
- 613E — Dark Oxidized Satin Bronze (powder coat)
- 629 — Bright Stainless Steel
- 630 — Satin Stainless Steel
- BSP — Black Suede Powder (powder coat)
Faceplates & Accessories
1DB Option — Faceplates for deadbolts in metal frame applications:
- 1N (4-7/8” x 1-1/4”) — Mortise locksets, deadbolt used for night-latch function only. Compatible: Accurate, Arrow, Baldwin, Marks, Omnia, PDQ, Others. ANSI/BHMA: #E09391, #E09392, #E09393, #E09331, #E09332, #E09333
- 1ND (4-7/8” x 1-1/4”) — Mortise locksets, deadbolt for night-latch function only. Compatible: Sargent (7700 & 8100 series), Yale (8700). ANSI/BHMA: #E09391, #E09392, #E09393, #E09331, #E09332, #E09333
- 1NM (4-7/8” x 1-1/4”) — Mortise locksets with deadlatch below latchbolt, deadbolt for night-latch function only. Compatible: Best (45H & 47H, 34H–37H), Corbin/Russwin, Falcon, Sargent (7800, 8200 & 9200 series). ANSI/BHMA: #E09391, #E09392, #E09393, #E09331, #E09332, #E09333
- 1NTD (4-7/8” x 1-1/4”) — Mortise locksets with normally extended 1” deadbolt without deadlatch. Compatible: Arrow, Baldwin, Marks, Omnia, PDQ, Others. ANSI/BHMA: #E09391, #E09392, #E09393, #E09331, #E09332, #E09333
1DB-2 Option — Faceplate for deadbolts in wood frame applications:
- 1N-2 (9” x 1-3/8”) — Mortise locksets, deadbolt for night-latch function only. Compatible: Accurate, Arrow, Baldwin, Marks, Omnia, PDQ, Schlage, Yale (8700), Others. ANSI/BHMA: #E09391, #E09392, #E09393, #E09331, #E09332, #E09333
Accessories:
- 1600-104-xxx — Lip extension trim adapter (finish to match)
- 1600-106-xxx — 1006 adapter and trim enhancer kit (finish to match)
- OPT-1SRK — Spring replacement kit
- OPT-1LM — Single lock monitor
- OPT-1DLM — Dual lock monitors
- MOD-1SOL — Solenoid replacement module
- HES-MTK — Metal template kit
Certifications & Listings
- UL 10C fire-rated, 3-hour single door (fail secure only)
- UL 10C fire-rated, 1-1/2-hour double door
- CAN4-S104 (ULC-S104) fire door conformant
- ANSI/SDI 250.13 windstorm resistant
- ANSI-ASTM E330
- Florida Building Code approved — TAS 201, 202, 203
- UL 1034 burglary-resistant listed, suitable for outdoor use
- UL 294 listed
- ANSI/BHMA A156.31, Grade 1
- NFPA-252 fire door conformant
- ASTM-E152 fire door conformant
- California Fire Marshal listed
- RoHS compliant
Manufacturer Resources
Electric Strike Overview
Product Specs
- Subcategory:
- Electric Strikes
- Product Group:
- Electronic Access Controls
- Series:
- 1600 Series
- Grade:
- Grade 1
- Dynamic Strength:
- 70 ft-lbs
- Shim:
- Field Adjustable
- Warranty:
- 5 Year (10 Year when SmartPACIII)
- Endurance Cycles:
- 1,000,000
- Product Subgroup:
- Electric Strikes
- Product Type:
- Electric Strike Bodies
- Lock Type:
- Mortise or Cylindrical
- Outdoor Rated:
- Yes
- Preload Capable:
- No
- Windstorm Rated:
- Yes
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Power:
- 12/24 VDC (PoE Friendly)
- Battery Operated:
- No
- Holding Force:
- 1,500 lbs
- Tags:
- hes1600
- Product Model:
- HES-1600
- Product Voltage:
- 12/24 VDC
- Face Plate:
- 4-7/8"
- Fire Rating:
- Yes
- Latch Specification:
- Latchbolt and Deadbolt
- Door Strike:
- 1-5/8"
- Product Category:
- Electronic Access Controls
- Product Substrate:
- Stainless Steel
- Product Width:
- 1-3/4"
- Department:
- Door Hardware
- Product Depth:
- 1-5/8"
HES 1600 630 – Frequently Asked Questions
1) Does the HES 1600 electric strike work with my existing mortise lock, or do I need a specific brand?
The 1600 Series strike body fits every brand of cylindrical or mortise lock designed to work with a 4-7/8 inch strike plate. What changes brand to brand is the faceplate you pair with it, not the body. The 1N faceplate covers Accurate, Arrow, Baldwin, Marks, Omnia and PDQ mortise locksets; the 1ND covers Sargent 7700 and 8100 and Yale 8700; the 1NM covers Best 45H/47H and 34H-37H, Corbin/Russwin, Falcon, and Sargent 7800, 8200 and 9200. Buy the body once, then match the faceplate to the lock in the door.
2) Will the HES 1600 accept a 1 inch deadbolt as well as the latchbolt?
Yes, up to a 1 inch deadbolt, and that is the reason to choose it over a latchbolt-only strike. The cavity is spaced vertically to take both the latchbolt and the deadbolt of the same lock, so a classroom or entry mortise lock with a night-latch deadbolt works off one strike. If the lock throws a normally extended 1 inch deadbolt with no deadlatch, use the 1NTD faceplate.
3) How deep does the frame cutout need to be for a HES 1600 electric strike?
The strike body is 1-5/8 inches deep and 1-3/4 inches wide, behind a 4-7/8 inch faceplate. That depth is what to check against your frame before you commit, particularly on an aluminum or shallow hollow metal jamb. It goes into metal or wood frames, and a field-adjustable integrated shim takes up the gap so you are not making up spacers on site.
4) Can the HES 1600 be set fail safe or does it have to be ordered that way?
Fail safe and fail secure are field selectable on the strike, so one part number covers both and you decide at install. One caution on fire doors: the UL 10C fire rating, 3 hours on a single door, applies in fail secure only. On a fire-rated opening, set it fail secure and release the door another way.
5) Is one 12 volt and 24 volt strike enough, or do I need to order voltage-specific parts for a mixed building?
One part covers both. The 1600 is auto-sensing 12/24 VDC dual voltage, drawing 0.24 amps at 12 volts and 0.12 amps at 24 volts, continuous duty on DC. It is PoE friendly, which matters when the strike is running off an access control panel or a PoE door controller rather than a dedicated supply. Note AC is intermittent duty only, so do not hold it energized on an AC transformer.
6) My door is under pressure from a closer or a stack effect. Will the HES 1600 still release?
No, not against latch preload. The 1600 is not a preload capable strike, so if the door is pushed against the keeper by wind pressure, a stair pressurization fan, or a hard-set closer, it may bind rather than release. Fix the opening first, adjust the closer, correct the frame alignment, or use the field-adjustable shim to set the gap. If the opening genuinely holds load on the latch, specify a strike rated for preload instead.
7) Is the HES 1600 strong enough for an exterior perimeter door on a commercial building?
It is built for that use. Stainless steel construction, 1,500 lbs static strength and 70 ft-lbs dynamic, ANSI/BHMA A156.31 Grade 1, and UL 1034 burglary-resistant listed and suitable for outdoor use. It is also windstorm rated to ANSI/SDI 250.13 with ANSI-ASTM E330 and Florida Building Code approval under TAS 201, 202 and 203, which is what a coastal or hurricane-zone spec asks for.
8) Which HES 1600 monitor option should I specify, LM, DLM, LMS or DLMS?
Monitoring is ordered with the strike, not added later as a plug-in, so decide before the PO. LM gives a single lock monitor telling the panel the latch is secure in the keeper. DLM doubles that up for redundancy or for a second contact to another system. LMS adds a strike monitor on top of the lock monitor, reporting keeper position so you can tell an unlocked strike from an open latch. DLMS gives dual lock monitors plus the strike monitor, which is the full set for an audited or alarmed opening. There is also a no-monitor version if the door is just being released. All four options, plus no monitor, come in every one of the seven finishes.
9) Do I have to order a handed version of the HES 1600 for left and right doors?
No handing to specify. The 1600 is non-handed, so the same part goes into a left-hand or right-hand opening. For a property manager standardizing across a building, that means one line item covers every door instead of splitting the order by swing.
10) Can I match the HES 1600 strike to the lever and hinges already on my doors?
Seven fully finished options: 605 bright brass, 606 satin brass, 612 satin bronze, 613E dark oxidized satin bronze in powder coat, 629 bright stainless, 630 satin stainless, and BSP black suede powder. The faceplate, keeper, case and trim are all finished, not just the visible plate, so the inside of the cavity does not read as bare metal when the door stands open. Lip extension trim adapters, part 1600-104, are available in matching finishes.
11) Is the HES 1600 approved for a fire-rated door assembly?
Fire rated, and the listings are specific about the configuration. UL 10C at 3 hours on a single door, fail secure only, and UL 10C at 1-1/2 hours on a double door. It is also conformant to NFPA-252, ASTM-E152 and CAN4-S104 (ULC-S104), listed by the California Fire Marshal, and UL 294 listed for access control use. For a hospital, school or government spec, those are the lines the reviewer is looking for.
12) Should I use a 4-7/8 inch electric strike like the HES 1600 or a narrow strike for my opening?
The 4-7/8 inch faceplate strike is the one for a hollow metal or wood frame with a standard ANSI strike prep, which is what most commercial swinging doors have. It suits a cylindrical or mortise lock and takes both latchbolt and deadbolt. It is the wrong choice for a narrow aluminum stile storefront door, where the jamb is too shallow for a 1-5/8 inch deep body and the prep is a narrow rim or cutout instead. Check the frame depth first, then the existing strike prep.
13) How long will a HES 1600 electric strike last on a high traffic entrance?
Rated at 1,000,000 cycles, which on a main entrance running a few hundred releases a day is years of service rather than months. It is also serviceable in place: the spring replacement kit is OPT-1SRK and the solenoid comes out as a module, MOD-1SOL, so a worn strike gets repaired in the frame instead of pulled and replaced. Lock monitors are field-addable as OPT-1LM or OPT-1DLM.
14) Will the HES 1600 wire into my existing access control panel without a special harness?
It ships with ElectroLynx connectors, the plug-in harness standard used across Allegion door hardware, so a wired door with ElectroLynx transfer hinges or a power transfer connects without field splicing. On a straight two-wire release it is simply 12 or 24 VDC to the strike, and the auto-sensing circuit handles either. Monitor contacts are separate conductors and only present if you ordered LM, DLM, LMS or DLMS.
How fast can I get the HES 1600 630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HES 1600 630 come with a warranty?
Absolutely. The HES 1600 630 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HES 1600 630?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the HES 1600 630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.