Sta-Kon RG267 INS NYLON RING T...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$66.77
$23.50

Sta-Kon RG267 INS NYLON RING TERM 2 BOLT No10 RED

(No reviews yet) Write a Review

Model: RG267
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$66.77
$23.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
INS NYLON RING TERM 2 BOLT No10 RED

Manufacturer Resources

Product Specs

Country Of Origin:
Mexico (MX)
Product Subgroup:
General Terminals
Product Type:
Nylon Insulated Ring Terminal
Standards:
UL E9809
Voltage Rating:
600 V
Wire Size:
2 AWG
Department:
Electrical
Product Group:
Wire Termination
Product Color:
Red
Product Material:
Copper

Sta-Kon RG267 – Frequently Asked Questions

1) What wire size does the Sta-Kon RG267 ring terminal take?
The RG267 is sized for 2 AWG copper conductor. It's a single-size barrel, so it won't grip smaller wire reliably, and 1 AWG or larger won't enter the barrel. If your feeder is a different gauge, order the matching barrel size rather than trying to make this one work.
2) Will the RG267 terminal bolt down on a No. 10 stud?
Yes. The RG267 is a two-bolt ring tongue drilled for No. 10 hardware, so it lands on a pair of No. 10 studs or screws. The two-hole tongue resists rotation under torque, which is why it's used on bus bars and equipment pads rather than a single-hole ring.
3) Can I use the RG267 on aluminum conductor?
No. The RG267 barrel is copper and is intended for copper conductor only. Terminating aluminum in a copper-only barrel risks galvanic corrosion and a high-resistance joint. For aluminum feeders you need a terminal marked AL or AL9CU.
4) Is nylon insulation on this ring terminal better than vinyl for panel work?
The RG267 uses nylon rather than vinyl insulation. Nylon is tougher against abrasion and holds up better when terminals are pulled through tight gutters or flexed in a panel, and it resists cut-through from the crimp die flare. Vinyl insulated terminals are the lower-cost choice for dry, static indoor terminations. For 2 AWG feeder landings that get handled and re-torqued, nylon is the usual spec.
5) Do I need a special crimp tool for a 2 AWG Sta-Kon ring terminal?
Yes. At 2 AWG the RG267 barrel is well past the range of a hand-squeeze insulated terminal plier. It needs a heavy crimper with the correct die nest for the barrel size, typically a long-handle or hydraulic tool. The tongue is a two-bolt No. 10 pattern, so budget for the torque wrench on the landing side as well.
6) Should I specify a two-hole ring terminal or a single-hole lug for a 2 AWG ground or feeder landing?
A two-bolt tongue like the RG267 is what you want where the conductor can be pulled or vibrated and you cannot allow the terminal to swing on its bolt, such as bus bar landings, ground bars and equipment pads. A single-hole ring is quicker to install and fine where the pad only has one tapped hole and the conductor is strapped. Check the equipment pad first: if it only has one No. 10 hole, this two-bolt part will not land.
7) Why is the Sta-Kon 2 AWG ring terminal red, and does the color mean anything?
Red is the nylon insulation color on the RG267. On Sta-Kon terminals the insulation color identifies the wire range the barrel is built for, so an electrician pulling terminals from a bin can confirm he has the 2 AWG part by color before crimping. It is not a voltage or phase code.
8) What is the exact part number to order for the Sta-Kon 2 AWG two-bolt red ring terminal?
Order Sta-Kon RG267. That one part number covers the configuration, there are no finish or length options to specify. It is manufactured in Mexico.
How fast can I get the Sta-Kon RG267 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RG267 come with a warranty?
Absolutely. The Sta-Kon RG267 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RG267?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RG267 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.