Metallics

Anchors 500 5/16 x 4 Wdg St-zn (Jar 100)

10 x 1-1/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Features Steel Zinc Material Flat head with Phillips Drive 10 Diameter, 1-1/4" Length Additional Notes Other sizes and...

Washers 1/2 X 1-1/2 Fender SS (Jar 100)

Washers 1/4 USS Flat Galv (Jar 100)

Anchors 1/4 x 4 Wdg SS (Jar 100)

Screws 6 x 3/8 PN CD TS SS (Jar 100)

12 x 3 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Features Pan head with square Drive Steel Zinc Material 12 Diameter, 3" Length Additional Notes Other sizes and quantities...

10 x 2 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Additional Notes Other sizes and quantities available by request | This type of recess has a square center opening, slightly...

10 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 500qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME...

Nuts 1/4-20 Stamp Wing Nut St-zn (Jar 100) Features Designed for Rapid Assembly and Disassembly by Hand Additional Notes Other sizes and quantities available by request, Does not specify...

Anchors 3/8 X 3-3/4 Wedge Ancr SS (Jar 50)

Anchors 3/8 x 3-1/2 Wdg Galv (Jar 100)

.6 x 3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 1000qty Features Pan head with Phillips and slotted Drive Steel Zinc Material .6 Diameter, 3/4" Length Additional Notes Other...

8 x 1-1/2 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Features Fastening stainless steel parts to aluminum or steel can cause a type of corrosion known as a galvanic couple in...

Washers 7/8 Flat Galv (Jar 50)

Anchor 3/4 x 4-1/4 Wedge Ancr 316-SS (Jar 20)

14 x 1 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 500qty Additional Notes Other sizes and quantities available by request. | SAE J78 does...

12 x 2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #3 Drill Point- Steel Zinc - 100qty Features #3 Drill Point Steel Zinc Material Pan Head with Phillips Drive 12 Diameter, 2"...

4 x 1/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18...

Screw 8 x 1-1/4 PN PH TS St-Zn (Jar 100)