Metallics

10 x 5/8 in. Pan Head Phillips Self-Drilling & Tapping Screws - #3 Drill Point- Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | SAE J78 does not include...

Bolt 1/4 X 5 Tie Wire Acoust Tog Bl St-zn (Jar 25)

14 x 1-3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty Features 14 Diameter, 1-3/4" Length Pan head with Phillips and slotted Drive Steel Zinc Material Additional...

4 x 1-1/2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Features Flat head with Phillips Drive Steel Zinc Material 4 Diameter, 1-1/2" Length Additional Notes Other sizes and...

8 x 1-1/4 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty Features Made in the USA Pan head with slotted, Phillips and square Drive Steel Zinc Material 8 Diameter, 1-1/4" Length

10 x 3/8 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty Features 10 Diameter, 3/8" Length Steel Zinc Material Pan head with Phillips Drive Additional Notes Other sizes and...

12 x 2-1/2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

10-32 x 3/4 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty Features Made in the USA Round head with slotted, Phillips and square Drive Steel Zinc Material 10-32 Diameter, 3/4"...

10 x 3/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Features Steel Zinc Material Flat head with Phillips Drive 10 Diameter, 3/4" Length Additional Notes Other sizes and...

8 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - 410 Stainless Steel - 100qty Additional Notes Other sizes and quantities available by request | SAE J78 does not...

6-32 x 1-1/2 in. Truss Head Combo Receptacle Screws - Steel Zinc - 100qty Features 6-32 Diameter, 1-1/2" Length Steel Zinc Material Truss head with slotted and Phillips Drive

8 x 1/2 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Additional Notes Other sizes and quantities available by request | This type of recess has a square center opening,...

6 x 1 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | This type of recess has a square center opening, slightly...

Anchors 5/8 X 4-1/2 Wedge Ancr St-zn (Jar 25)

Washers 7/16 Flat St-zn (Jar 100)

Anchors 1/4 x 3-1/4 Wdg Galv (Jar 100)

Anchors 3/4 X 6-1/4 Wedge Ancr St-zn (Jar 10)

Nuts 5/16-18 Hx Keps Locknut SS (Jar 100) Features This is the most popular type of locknut because of its versatility, cost and ease of installation. Doesn't gall screw thread. Made to American...

1/4-20 x 3/8 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty Features Steel Zinc Material 1/4 -20 Diameter, 3/8" Length Made in the USA Round head with slotted, Phillips and square...

8 x 1 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - 410 Stainless Steel - 100qty Features #2 Drill Point 8 Diameter, 1" Length 410 Stainless Steel Material Pan Head with...