Nibco 5861-2-LH 90-Degree Elbo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$24.23
Image coming soon

Nibco 5861-2-LH 90-Degree Elbow with Low Heel Inlet Spg x Hub - ABS DWV

(No reviews yet) Write a Review

Model: I447000

In Stock (leaves warehouse same day if ordered before 3pm ET)

$24.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The ABS DWV 90-degree elbow with low heel inlet features a spigot x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

  • Service temperature -40-DegreeF to 180-DegreeF
  • Do not test or use with compressed air or other gases
  • ASTM D2665
  • ASTM D3965
  • ASTM D2661 and D3311
  • UL Listed 94V-0
  • NSF/ANSI Standard 14
  • NSF U.P. Certified

Plastic Fittings Installation Instructions

Manufacturer Resources

NIBCO Plastic Fittings Catalog

Product Specs

All Application(s):
DWV Drain / Waste / Vent
All Basic Material:
ABS - Acrylonitrile Butadiene Styrene
Classification:
ABS DWV Elbows
End Connection:
Solvent Weld
Fitting Bend Angle:
90 Deg (1/4 Bend)
Pipe Schedule:
40
Plastic End Connection Type:
Spg x Hub
Product Group:
Fitting
Product Type:
ABS DWV Elbows
System Use:
Commercial Plumbing, Residential Plumbing
Type of Elbow:
Low Heel Inlet
Product Subgroup:
Elbow
Department:
Plumbing
Product Color:
Black
Product Weight:
0.83 lb
Product Width:
6.31 in
Product Height:
3.96 in
Product Length:
6.56 in

Nibco I447000 – Frequently Asked Questions

1) What is the low heel inlet on the Nibco 5861-2-LH elbow used for?
The low heel inlet is a side branch cast into the low (heel) side of a 90 degree quarter bend, so you can pick up a 2 inch drain line right at the turn instead of adding a separate fitting downstream. The 5861-2-LH is a 3 x 3 x 2 inch configuration: 3 inch through the bend, 2 inch at the heel inlet. It changes direction of flow in a DWV drain, waste and vent system.
2) Is the Nibco 5861-2-LH spigot on one end and hub on the other?
Yes. The 5861-2-LH is a Spg x Hub fitting: one end is a spigot that fits into the hub of another fitting, and the other end is a hub that accepts pipe. That lets it drop straight into a fitting socket without a coupling. Both ends are solvent weld, Schedule 40 sizing.
3) Can I use this ABS elbow with PVC pipe or glue it to copper or cast iron?
The fitting is ABS (acrylonitrile butadiene styrene) and is joined by solvent cementing or threading, so it bonds to ABS DWV pipe using ABS cement. It is not a PVC fitting. To tie into steel, copper or cast iron you use transition fittings rather than solvent cementing to those materials.
4) What temperature range can this ABS DWV fitting handle, and can it be air tested?
Service temperature runs -40 F to 180 F, which covers typical waste and vent duty including intermittent hot discharge. Do not test or use it with compressed air or other gases. Use water for pressure or leak testing on the system.
5) Is this the black ABS fitting that matches existing black DWV pipe in a building?
Yes, it is black ABS, the standard color for ABS DWV, so it visually matches existing black ABS drain lines. If the drain lines in the building are white or off-white, those are PVC and this fitting is the wrong material for that system.
6) What is the exact Nibco part number for the 3 x 3 x 2 low heel inlet elbow?
The 5861-2-LH in 3 x 3 x 2 inch carries manufacturer part number I447000, UPC 039923197122. That is the single size configuration for this quarter bend with the 2 inch heel inlet.
How fast can I get the Nibco I447000 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco I447000 come with a warranty?
Absolutely. The Nibco I447000 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco I447000?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco I447000 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!