Nibco S-113 Gate Valve - Bronz...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$146.99
Nibco S-113 Gate Valve - Bronze, Non-rising Stem, Solder Ends

Nibco S-113 Gate Valve - Bronze, Non-rising Stem, Solder Ends

(No reviews yet) Write a Review

Model: NJ0J00A

In Stock (leaves warehouse same day if ordered before 3pm ET)

$146.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.

  • 125 psi/8.6 bar saturated steam to 353-DegreeF/178-DegreeC
  • 200 psi/13.8 bar non-shock cold working pressure
  • Non-rising stem
  • Solid wedge
  • Screw-in bonnet
  • Class 125 solder end connections
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • Dezincification resistant
  • Conforms to MSS SP-80

Bronze Gate Valves IOM Manual

Manufacturer Resources

Product Specs

All Basic Material:
Bronze
Classification:
Bronze Gate Valves
End Connection:
Solder
Product Group:
Valve
Seat Seal Material:
Bronze
System Use:
Commercial Plumbing, Heating, HVAC
Type of Valve:
Gate Valve
Valve End Connection Type:
S -- Female Solder Cup
Valve Gate Stem Design:
Non-Rising Stem
Valve Multi Turn Bonnet Design:
Screw-in Bonnet
Valve Pressure Rating (CWP):
200 PSI / 13.8 Bar CWP
Valve Pressure Rating (SWP):
125 PSI / 8.6 Bar SWP
Valve Trim Package:
Bronze Wedge
Product Subgroup:
Valves
Product Type:
Bronze Gate Valves
Department:
Plumbing

Nibco NJ0J00A – Frequently Asked Questions

1) Will the Nibco S-113 gate valve work on copper tube, or does it need threaded pipe?
Solder only. The S-113 has Class 125 female solder cups on both ends, so it sweats directly onto copper tube. There are no threads on this valve, so if you're tying into threaded steel or need a union at the valve, you want a threaded-end bronze gate valve instead. Sizes run 3/8 inch through 3 inch.
2) What pressure and steam rating does the Nibco S-113 gate valve carry?
200 psi (13.8 bar) non-shock cold working pressure, and 125 psi (8.6 bar) saturated steam up to 353 degrees F (178 degrees C). That is the Class 125 bronze rating, which covers most commercial hydronic heating, chilled water and low-pressure steam work. If your loop runs above 200 psi cold or above 125 psi steam, this valve is under-rated for it.
3) Do I need headroom above a Nibco S-113 gate valve for the stem to rise?
No, and that's the point of it. The S-113 is a non-rising stem design, so the handwheel stays at a fixed height through the full stroke and the stem doesn't travel up out of the bonnet. That's what lets it go in tight chases, close to joists, or in a bank of valves where a rising-stem valve would hit something on the way open. If you need a visual indication of open or closed position from across the room, a rising stem valve gives you that instead.
4) Is a bronze gate valve the right choice, or should I use a ball valve for this line?
Gate valves like the S-113 are for isolation service, fully open or fully closed, on lines you shut down occasionally for maintenance. The solid wedge seats against bronze and gives a straight-through, low-restriction port when open. What a gate valve is not for is throttling; parking the wedge partway wears the seat and chatters. If you need quarter-turn speed or partial flow control, use a ball valve. For a main shutoff, a riser isolation, or a branch valve you touch twice a year, the gate valve is the standard spec.
5) Can the Nibco S-113 gate valve be rebuilt or repacked in place?
The S-113 uses a screw-in bonnet, so the bonnet threads out of the body and the stem, wedge and packing come with it. On a soldered valve, that matters: you can service the internals without unsweating the valve from the line, as long as you can back the bonnet off. Keep in mind the body stays in the piping either way, so plan clearance around the handwheel for a wrench on the bonnet hex.
6) Will a bronze gate valve hold up in a system with aggressive water, or will the zinc leach out?
The S-113 body and trim are bronze and the valve is dezincification resistant, which is the failure mode that eats ordinary brass valves in soft or chlorinated water, the alloy loses its zinc and goes porous and pink. Body, seat seal and wedge are all bronze on this valve, so there's no brass component sitting in the flow path to fail that way. It also conforms to MSS SP-80, the standard bronze gate, globe and check valve spec that mechanical drawings usually call out.
7) What size Nibco S-113 do I order for 3/4 inch copper, and what sizes are made?
Order by the copper tube size the cups accept. The S-113 runs 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2 and 3 inch, nine sizes in all. For 3/4 inch copper that's part number NJ0J008. The 1/2 inch is NJ0J006 and the 1 inch is NJ0J00A, the two most common sizes on branch and riser work.
8) Is the Nibco S-113 rated for compressed air and gas lines, not just water?
Yes, the S-113 is listed for hot and cold water, HVAC, steam, compressed air, gas and other general utility service in commercial and industrial buildings, at 200 psi cold working pressure. The limit to watch is the media, not the service: it's a Class 125 bronze valve, so verify the specific gas or chemical against Nibco's chemical resistance data before you commit a whole system to it.
How fast can I get the Nibco NJ0J00A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco NJ0J00A come with a warranty?
Absolutely. The Nibco NJ0J00A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco NJ0J00A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco NJ0J00A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!