Nibco T-211-Y Globe Valve - Br...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$268.46
Nibco T-211-Y Globe Valve - Bronze, PTFE Disc, Threaded Ends

Nibco T-211-Y Globe Valve - Bronze, PTFE Disc, Threaded Ends

(No reviews yet) Write a Review

Model: NL2K00A

In Stock (leaves warehouse same day if ordered before 3pm ET)

$268.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The NIBCO® bronze globe valve is recommended for bi-directional service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.

  • 125 psi/8.6 bar saturated steam to 366-DegreeF/178-DegreeC
  • 200 psi/13.8 bar non-shock cold working pressure
  • Integral seat
  • Screw-in bonnet
  • Renewable PTFE seat disc
  • Class 125 threaded end connections
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • Dezincification resistant
  • Conforms to MSS SP-80

Bronze Globe And Angle Valves IOM Manual

Manufacturer Resources

Product Specs

All Basic Material:
Bronze
Classification:
Bronze Globe Valves
End Connection:
Threaded
Product Group:
Valve
Seat Seal Material:
PTFE
System Use:
Commercial Plumbing, Heating, HVAC
Type of Valve:
Globe Valve
Valve End Connection Type:
T -- Female NPT Thread (FIPT)
Valve Multi Turn Bonnet Design:
Screw-in Bonnet
Valve Pressure Rating (CWP):
200 PSI / 13.8 Bar CWP
Valve Pressure Rating (SWP):
125 PSI / 8.6 Bar SWP
Valve Trim Package:
PTFE Seat
Product Subgroup:
Valves
Product Type:
Bronze Globe Valves
Department:
Plumbing

Nibco NL2K00A – Frequently Asked Questions

1) Can I use the Nibco T-211-Y bronze globe valve on potable drinking water?
No. Use in U.S. drinking water applications is prohibited after January 3, 2014, so the T-211-Y is not a potable water valve. It is meant for commercial and industrial service: hot and cold water systems that are not drinking water, HVAC, steam, compressed air, gas and other general utility lines. If your line is potable, you need a lead-free rated valve instead.
2) What are the pressure and temperature ratings on the Nibco T-211-Y globe valve?
Two ratings apply. Non-shock cold working pressure is 200 psi (13.8 bar). On saturated steam it is rated 125 psi (8.6 bar) up to 366 degrees F (178 degrees C). That steam rating is why it gets specified on low pressure steam and condensate as well as chilled and hot water loops.
3) How does the Nibco T-211-Y connect to my pipe, and do I need to solder it?
No soldering. The T-211-Y has Class 125 female NPT threaded ends (FIPT), so it screws onto male threaded pipe nipples or threaded adapters. That makes it the choice where you cannot bring a torch to the work, or where you want to be able to break the valve out of the line later. If your line is copper tube and you want a sweat joint, you need the solder-end version of the bronze globe valve instead.
4) Should I use a globe valve or a ball valve for throttling flow?
Use the globe valve. A globe valve like the T-211-Y moves a disc onto an integral seat through a multi-turn stem, so you can hold it part open and set a flow rate without chewing up the seat. A ball valve is a quarter-turn on/off device; throttling one wire-draws the seats and it fails early. Pick the ball valve for isolation you open and close fast, pick the T-211-Y where you are balancing or regulating a branch. The trade-off is pressure drop, since a globe valve turns the flow path and a full port ball valve does not.
5) Is the seat on the Nibco T-211-Y replaceable if it starts passing?
Yes. The T-211-Y uses a renewable PTFE seat disc, so when the valve starts weeping by, you back out the screw-in bonnet and replace the disc rather than cutting the valve out of the line. That serviceability is the reason globe valves stay in service for decades in a plant. PTFE also handles the 366 degree F steam rating better than a rubber composition disc would.
6) What pipe sizes does the Nibco T-211-Y bronze globe valve come in?
Ten sizes, from 1/4 inch up through 3 inch: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2 and 3 inch. Common mechanical room sizes carry their own part numbers, for example NL2K006 for 1/2 inch, NL2K00A for 1 inch and NL2K00D for 2 inch. Sizing the valve to the line size keeps the throttling characteristic predictable.
7) Does the Nibco T-211-Y have to be installed with flow in a particular direction?
No. The T-211-Y is recommended for bi-directional service, so it does not carry a required flow arrow the way many globe valves do. What still matters at install is orientation of the bonnet and stem for access: leave room above the valve to pull the screw-in bonnet and change the PTFE disc without dismantling pipe.
8) Will the bronze body on this Nibco globe valve hold up in a hard water or high chloride system?
The T-211-Y body is bronze and is dezincification resistant, which is the failure mode that cracks and plugs ordinary brass valves in aggressive water. It also conforms to MSS SP-80, the standard that governs bronze gate, globe and check valves, so a spec calling for an MSS SP-80 Class 125 bronze globe valve is satisfied. For an unusual chemical service, check the fluid against Nibco's chemical resistance data before committing.
9) I'm standardizing shutoffs across a building's mechanical rooms. Does one Nibco T-211-Y cover hot water, chilled water and steam?
It does, within the ratings. One valve family covers commercial plumbing, heating and HVAC service, plus compressed air and gas utility lines, so a property or facilities team can stock a single threaded bronze globe valve across those systems. The limits to check are 200 psi cold working pressure and 125 psi saturated steam at 366 degrees F, and the fact that it cannot be used on potable drinking water. Stocking spare PTFE discs alongside makes the standardization worth more, since the seat is renewable.
How fast can I get the Nibco NL2K00A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco NL2K00A come with a warranty?
Absolutely. The Nibco NL2K00A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco NL2K00A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco NL2K00A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!